4G Wireless Systems
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator
******

Posts: 3,048
Joined: Dec 2008
#1
21-09-2008, 10:55 AM


Definition
Fourth generation wireless system is a packet switched wireless system with wide area coverage and high throughput. It is designed to be cost effective and to provide high spectral efficiency . The 4g wireless uses Orthogonal Frequency Division Multiplexing (OFDM), Ultra Wide Radio Band (UWB),and Millimeter wireless. Data rate of 20mbps is employed. Mobile speed will be up to 200km/hr.The high performance is achieved by the use of long term channel prediction, in both time and frequency, scheduling among users and smart antennas combined with adaptive modulation and power control. Frequency band is 2-8 GHz. it gives the ability for world wide roaming to access cell anywhere.

Wireless mobile communications systems are uniquely identified by "generation designations. Introduced in the early 1980s, first generation (1G) systems were marked by analog frequency modulation and used primarily for voice communications. Second generation (2G) wireless communications systems, which made their appearance in the late 1980s, were also used mainly for voice transmission and reception The wireless system in widespread use today goes by the name of 2.5G-an "in between " service that serves as a stepping stone to 3G. Whereby 2G communications is generally associated with Global System for Mobile (GSM) service, 2.5G is usually identified as being "fueled " by General Packet Radio Services (GPRS) along with GSM. In 3G systems, making their appearance in late 2002 and in 2003, are designed for voice and paging services, as well as interactive media use such as teleconferencing, Internet access, and other services. The problem with 3G wireless systems is bandwidth-these systems provide only WAN coverage ranging from 144 kbps (for vehicle mobility applications) to 2 Mbps (for indoor static applications). Segue to 4G, the "next dimension " of wireless communication. The 4g wireless uses Orthogonal Frequency Division Multiplexing (OFDM), Ultra Wide Radio Band (UWB), and Millimeter wireless and smart antenna. Data rate of 20mbps is employed. Mobile speed will be up to 200km/hr.Frequency band is 2 ?]8 GHz. it gives the ability for world wide roaming to access cell anywhere.

Features:
o Support for interactive multimedia, voice, streaming video, Internet, and other broadband services
o IP based mobile system
o High speed, high capacity, and low cost per bit
o Global access, service portability, and scalable mobile services
o Seamless switching, and a variety of Quality of Service driven services
o Better scheduling and call admission control techniques
o Ad hoc and multi hop networks (the strict delay requirements of voice make multi hop network service a difficult problem)
o Better spectral efficiency
o Seamless network of multiple protocols and air interfaces (since 4G will be all ?]IP, look for 4G systems to be compatible with all common network technologies, including802.11, WCDMA, Blue tooth, and Hyper LAN).
o An infrastructure to handle pre existing 3G systems along with other wireless technologies, some of which are currently under development.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
project report helper
Active In SP
**

Posts: 2,270
Joined: Sep 2010
#2
26-10-2010, 10:57 AM


.ppt   38183780-4G.ppt (Size: 1.67 MB / Downloads: 296)
Fourth Generation


Fourth generation (4G)
mobile systems

High-speed data rates at 20 to 100 Mbps, suitable for high resolution movies and television.
Initial deployments are anticipated in 2006- 2010.
Design
Technology used
Performance


Reply
project report helper
Active In SP
**

Posts: 2,270
Joined: Sep 2010
#3
26-10-2010, 11:05 AM


.doc   4G.doc (Size: 809 KB / Downloads: 170)
4G TECHNOLOGY


S.NAYAZ AHMED, S.SARAN KUMAR
Electronics and Communication Engineering,final year
C.Abdul Hakeem College of Engineering & Tech
Melvisharam
vellore Dt-631102



Abstract


The main aim of our paper is to bring forth the detail about the low cost wireless internet access for rural area through the 4G technology wi-fi (IEEE 802.11n).

Although a large number of Internet users now enjoy high-speed access, there are still vast geographic regions where broadband services are either prohibitively expensive or simply unavailable at any price. Researches and technology are more needed for rural areas where the development is lacking.

Hence our paper analyses the cost and effectiveness of all possible technologies such as Cisco Aeronet Bridge based system, tethered Aerostat based network, and mesh network to find the suitable broadband access technology for rural people in a bearable cost.

Introduction

The 4G technologies are all about improving the performance of today’s mobile networks, and also revolutionizing the model to create a truly ultra-broadband mobile experience.
The international telecommunications regulatory and standardization bodies are working for commercial deployment of 4G networks roughly in the 2012-2015 time scale.

Reply
smart paper boy
Active In SP
**

Posts: 2,053
Joined: Jun 2011
#4
19-07-2011, 03:30 PM


.ppt   4G wireless system.ppt (Size: 549.5 KB / Downloads: 96)
Introduction
Fourth generation wireless system is a packet switched wireless system with wide area coverage and high throughput.
It is designed to be cost effective and to provide high spectral efficiency.
The 4g wirelesses uses Orthogonal Frequency Division Multiplexing (OFDM), Ultra Wide Radio Band (UWB), and Millimeter wireless.
Data rate of 20mbps is employed. Mobile speed will be up to 200km/hr.
The high performance is achieved by the use of long term channel prediction, in both time and frequency, scheduling among users and smart antennas combined with adaptive modulation and power control.
Frequency band is 2-8 GHz. it gives the ability for worldwide roaming to access cell anywhere
Features
About 4G
Implementation Using 4G
Transmission
Wireless Technologies Used In 4G
Issues
The first issue deals with optimal choice of access technology, or how to be best connected.
Given that a user may be offered connectivity from more than one technology at any one time, one has to consider how the terminal and an overlay network choose the radio access technology suitable for services the user is accessing
The second issue regards the design of a mobility enabled IP networking architecture, which contains the functionality to deal with mobility between access technologies.
This includes fast, seamless vertical (between heterogeneous technologies) handovers (IP micro-mobility), quality of service (QoS), security and accounting. Real-time applications in the future will require fast/seamless handovers for smooth operation
Mobility Management
Features of mobility management in Ipv6
128-bit address space provides a sufficiently large number of addresses
High quality support for real-time audio and video transmission, short/bursty connections of web applications, peer-to-peer applications, etc
Faster packet delivery, decreased cost of processing - no header checksum at each relay, fragmentation only at endpoints
Smooth handoff when the mobile host travels from one subnet to another, causing a change in its Care-of Address
Applications
4GCar
4G and public safety
Sensors in public vehicle
Cameras in traffic light
First responder route selection
Traffic control during disasters
Future
Increased speed is a critical requirement for 4G communications systems.
Data-rate increases of 10-50X over 3G systems will place streaming audio and video access into the hands of consumers who, with each wireless generation, demand a much richer set of wireless-system features.
Power control will be critical since some services (such as streaming video) require much more power than do others
4G's flexibility will allow the integration of several different LAN and WAN technologies
A 4G appliance would be as important in home-networking applications as it would as a device to communicate with family, friends, and co-workers
Finally, a 4G wireless phone would give a user the capability of global roaming and access—the ability to use a cell phone anywhere worldwide.
At this point, the 4G wireless system would truly go into a "one size fits all" category, having a feature set that meets the needs of just about everyone
Conclusion
The mobile technology though reached only at 2.5G now, 4G offers us to provide with a very efficient and reliable wireless communication system for seamless roaming over various network including Internet, which uses IP network.
The 4G systems will be implemented in the coming years, which are a miracle in the field of communication engineering technology
Reply
seminar paper
Active In SP
**

Posts: 6,455
Joined: Feb 2012
#5
15-02-2012, 10:53 AM


to get information about the topic 4G Wireless Systems full report ,ppt and related topic refer the link bellow

topicideashow-to-4g-wireless-systems-seminar and presentation

topicideashow-to-4g-wireless-systems-full-seminar and presentation-report-download

topicideashow-to-4g-wireless-systems--7478

topicideashow-to-4g-wireless-system-simple-explanation

topicideashow-to-4g-wireless-systems
Reply
sachin29121993
Active In SP
**

Posts: 1
Joined: Sep 2012
#6
27-09-2012, 12:58 PM

can i get ppt related to digital communication......plz
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  head movement based voice enabled wireless device switching for physically challenged jaseelati 0 205 05-02-2015, 02:23 PM
Last Post: jaseelati
  border security using wireless integrated network sensors ppt jaseelati 0 217 05-02-2015, 01:54 PM
Last Post: jaseelati
  detection and localization of multiple spoofing attackers in wireless networks ppt jaseelati 0 267 17-01-2015, 02:52 PM
Last Post: jaseelati
  Analysis of Distribution Systems with DSTATCOM pdf seminar projects maker 0 609 28-09-2013, 02:13 PM
Last Post: seminar projects maker
  DEFENDING WIRELESS NETWORKS FROM RADIO INTERFERENCE ATTACKS pdf seminar projects maker 0 421 25-09-2013, 02:12 PM
Last Post: seminar projects maker
  REPORT ON FLEXIBLE AC TRANSMISSION SYSTEMS seminar projects maker 0 572 21-09-2013, 03:55 PM
Last Post: seminar projects maker
  FPGA Implementation of Intelligent Systems for Virus Image Recognitions PPT seminar projects maker 0 492 20-09-2013, 03:02 PM
Last Post: seminar projects maker
  An Improved Maximum Power Point Tracker for Photovoltaic Energy Systems pdf seminar projects maker 0 624 13-09-2013, 04:12 PM
Last Post: seminar projects maker
  Introduction to Electric Power and Energy Systems pdf seminar projects maker 0 609 11-09-2013, 04:57 PM
Last Post: seminar projects maker
  Heat Pumps and Electric Resistance Heating Systems seminar projects maker 0 909 11-09-2013, 03:46 PM
Last Post: seminar projects maker