A Hot Isostatic Process for Fabricating Porous Materials
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
projectsofme
Active In SP
**

Posts: 1,124
Joined: Jun 2010
#1
29-09-2010, 11:19 AM



ABSTRACT


Hot isostatic processing (HIP) is the latest method to produce open porous materials, such as ceramics or metals. In this review paper, features and applications of HIPed porous materials are described. Sintering behavior under high pressure gas is also discussed in order to understand how porous materials are obtained by this method. HIPed porous materials have higher open porosity, higher mechanical strength, narrower pore size distribution and higher fluid permeability than conventionally sintered ones. These excellent properties of HIPed porous materials are due to the enhanced surface diffusion caused by the high gas pressure. By applying these excellent properties of HIPed porous materials, filters, grinding wheels, and porous electrodes for electrochemical analysis can be produced with better properties than products made by conventional sintering.

For more information about this article,please follow the link:
springerlinkcontent/m77382449t55651v/fulltext.pdf
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Smart materials in Automobile seminar ideas 8 10,011 25-10-2013, 11:46 AM
Last Post: Kesava17
  MANUFACTURING PROCESS OF A PISTON ppt study tips 0 953 20-08-2013, 01:08 PM
Last Post: study tips
  Introduction of Unconventional Manufacturing Process study tips 0 475 14-08-2013, 02:10 PM
Last Post: study tips
  AN INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS ON MRR IN TURNING OF PURE study tips 0 405 05-07-2013, 03:39 PM
Last Post: study tips
  Full Report on Smart materials in Automobile study tips 0 673 06-06-2013, 04:52 PM
Last Post: study tips
  INTRODUCTION TO SMART MATERIALS PPT study tips 0 817 30-05-2013, 12:04 PM
Last Post: study tips
  Composite materials on aerospace application PPT study tips 0 817 02-05-2013, 12:41 PM
Last Post: study tips
  ppt on Engineering materials study tips 0 766 19-02-2013, 10:10 AM
Last Post: study tips
  Hot tap water production by means of a directly fired boiler study tips 0 361 19-02-2013, 09:43 AM
Last Post: study tips
  Universal testing machine for mechanical properties of thin materials pdf study tips 0 796 18-02-2013, 09:55 AM
Last Post: study tips