BLUEHOME
Thread Rating:
  • 5 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Zigbee
Active In SP
**

Posts: 153
Joined: Aug 2010
#1
02-09-2010, 08:59 PM


About the project and implimentation
BlueHome is a home automation system wherein each one can check, and control their house-hold appliances using bluetooth enabled mobile phone. This system works through BlueTooth technology. The user can control his/her appliances using a Bluetooth mobile. Our project and implimentation has the following modules.
(a) Mobile Unit
The Mobile Unit is sub-divided into two categories. They are:
1. Device Discovery Unit
2. Device Communication Unit
The Mobile Unit consists of a Bluetooth enabled mobile phone. This device acts as a source end wherein the user can send the control signal to his/her home appliances.
The Device Discovery Unit deals with detecting the Bluetooth devices in its proximity. In our project and implimentation, we are using a Bluetooth dongle for communication. i.e, control signals are sent to control unit via dongle. This section includes detecting Bluetooth devices using java Bluetooth APIs. Once the devices are detected, a communication path is established between them (for later data transfers).
The Device Communication Unit is involved in further communication between Bluetooth devices once they are discovered. This unit is also developed using java Bluetooth APIs.
(b) Receiver End
The Receiver end is seialBlue embedded device. It receives the control signal sent by user via his/her Bluetooth mobile. It then transfers the received data to a microcontroller,which is serially connected, for further device contol.
(c ) Control Unit
This is the hardware end consisting of a micro controller along with its supporting devices. This unit receives data from seialBlue embedded device. This PIC is pre-programmed in such way to identify control signals and it automatically controls devices as accordingly.
Purpose of project and implimentation
The purpose of the project and implimentation is to enable a user to control the home devices remotely.

Software requirements
Platform :Linux/Windows
Technologies used : Java,J2ME,embedded C.

Hardware Requirements
Bluetooth enabled mobile phone, serialBlue embedded device,PIC16F877.

system requirements
In order to implement a new system the choice of a processor with maximum possible speed is made. There should be sufficient memory to store data and software tools for efficient processing.
System : IBM-Compatible PC
Processor : Pentium IV
Speed : 2.0 Ghz
Memory :512 MB RAM
Hard Disk Drive : 40 GB


.doc   bluehome.doc (Size: 19 KB / Downloads: 95)
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
adeel1950
Active In SP
**

Posts: 1
Joined: Sep 2010
#2
22-09-2010, 04:59 PM

plz send full documentation of this project and implimentation
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)