Blow molding
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
project report helper
Active In SP

Posts: 2,270
Joined: Sep 2010
12-10-2010, 09:36 AM

.doc   B M print 2.doc (Size: 1.66 MB / Downloads: 192)

Blow molding


Blow molding, also known as blow forming, is a manufacturing process by which hollow plastic parts are formed. It is a process used to produce hollow objects from thermoplastic.
In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and stretch blow molding.
The blow molding process begins with melting down the plastic and forming it into a parison or preform. The parison is a tube-like piece of plastic with a hole in one end in which compressed air can pass through.
The basic process has two fundamental phases. First, a preform (or parison) of hot plastic resin in a somewhat tubular shape is created. Second, a pressurized gas, usually air, is used to expand the hot preform and press it against a mold cavity. The pressure is held until the plastic cools. Better dimensional control at final product can be achieved . Once the plastic has cooled and hardened the mold opens up and the part is ejected.

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  MOLDING TECHNIQUES AND ITS MACHINES MANUFACTURERS ppt seminar projects maker 0 395 26-09-2013, 12:23 PM
Last Post: seminar projects maker
  Injection Molding Abstract study tips 0 327 21-06-2013, 12:51 PM
Last Post: study tips
  Injection Molding Machine Report project girl 0 353 28-01-2013, 11:22 AM
Last Post: project girl
  Injection Molding project girl 0 314 14-01-2013, 04:24 PM
Last Post: project girl
  Compression and Transfer Molding PPT project girl 0 403 11-12-2012, 02:44 PM
Last Post: project girl
  A BRIEF STUDY ON PLASTIC INJECTION MOLDING PROCESS project report helper 5 7,781 17-02-2012, 12:20 PM
Last Post:
  ANALYSIS OF PARTIAL SEIZURE (BLOW BY) IN DIESEL ENGINE seminar surveyer 0 1,546 15-10-2010, 03:15 PM
Last Post: seminar surveyer