Bubble-Sensing: A New Paradigm for Binding a Sensing Task to the Physical World using
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
seminar surveyer
Active In SP
**

Posts: 3,541
Joined: Sep 2010
#1
13-10-2010, 11:18 AM


Presented by:
Hong Lu
Nicholas D. Lane
Shane B. Eisenman
Andrew T. Campbell


.pdf   bubblesensing.pdf (Size: 449.63 KB / Downloads: 899)

Abstract

We propose Bubble-Sensing, a new sensor network abstraction that allows mobile phones users to create a binding between tasks (e.g., take a photo, or sample audio every hour indefinitely) and the physical world at locations of interest, that remains active for a duration set by the user. We envision mobile phones being able to affix task bubbles at places of interest and then receive sensed data as it becomes available in a delay-tolerant fashion, in essence, creating a living documentary of places of interest in the physical world. The system relies on other mobile phones that opportunistically pass through bubble-sensing locations to acquire tasks and do the sensing on behalf of the initiator, and deliver the data to the bubblesensing server for retrieval by the user that initiated the task. We describe an implementation of the bubble-sensing system using sensor-enabled mobile phones, specifically, Nokia’s N80 and N95 (with GPS, accelerometers, microphone, camera). Task bubbles are maintained at locations through the interaction of “bubble carriers”, which carry the sensing task into the area of interest, and “bubble anchors”, which maintain the task bubble in the area when the bubble carrier is no longer present. In our implementation, bubble carriers and bubble anchors implement a number of simple mobile-phone based protocols that refresh the task bubble state as new mobile phones move through the area. Phones communicate using the local ad hoc 802.11g radio to transfer task state and maintain the task in the region of interest. This task bubble state is ephemeral and times out when no bubble carriers or bubble anchors are in the area. Our design is resilient to periods when no mobiles pass through the bubble-area and is capable of “reloading” the task into the bubble region. In this paper, we describe the bubble-sensing system and a simple proof of concept experiment.


Introduction

The mobile phone has become a ubiquitous tool for communications, computing, and increasingly, sensing. Many mobile phone and PDA models (e.g., Nokia’s N95 and 5500 Sport, Apple’s iPhone and iPod Touch, and Sony Ericsson’s W580 and W910) commercially released over the past couple years have integrated sensors (e.g., accelerometer, camera, microphone) that can be accessed programmatically, or support access to external sensor modules connected via Bluetooth. The sensed data gathered from these devices form the basis of a number of new architectures and applications We present the Bubble-Sensing system, that acts to support the persistent sensing of a particular location, as required by user requests. Conceptually, a user with a phone that has opted into the Bubble-Sensing system visits a location of interest, presses a button on his phone to affix the sensing request to the location, and then walks away. The sensing request persists at the location until the timeout set by the initiator is reached. This mechanism can be viewed as an application in its own right (e.g., a user slogging his life), and as a persistent sensing building block for other applications.

While the notion of virtually affixing sensor tasks to locations is appealing, it requires some work to implement this service on top of a cloud of human-carried phone-based sensors. First, since the mobility of the phones is uncontrolled - there is no guarantee that sensors will be well-placed to sample the desired location specified by the sensing task. Further, there is the issue of communicating the sensing task to potential sensers when they are well-positioned. This is made more difficult when, either due to hardware or user policy limitations, an always-on cellular link and localization capabilities are not available on all phones. For example, wireless data access via EDGE, 3G, or open WiFi infrastructure is increasingly available, as is the location service via on-board GPS, WiFi, or cellular tower triangulation. However, for example, only a subset of mobile phones on the market have GPS and WiFi, and even when devices have all the required capabilities, users may disable the GPS and or limit data upload via WiFi and cellular data channels to manage privacy, energy consumption, and monetary cost.

Though the mobility in a people-centric sensor network is not controllable, it is also not random. In an urban sensing scenario, the visited areas of interest for one person are likely to be visited by many others (e.g., street corners, bus/subway stations, schools, restaurants, night clubs, etc.). We imagine a heterogeneous system where users are willing to share resources and data and to fulfill sensing tasks. Therefore, the bubble-sensing system opportunistically leverages other mobile phones as they pass by on behalf of a sensing task initiator. We adopt a two tier hardware architecture comprising the bubble server on the back end; and sensor-enabled mobile phones that can initiate sensing bubbles, maintain sensing bubbles in the designated location, replace bubbles that disappear due to phone mobility, enact the sampling as indicated by the sensing bubble, and report the sensed data back to the bubble server. Mobile phones participating in the bubble-sensing system take on one or more roles depending on their mobility characteristic, hardware capabilities, and user profiles. The bubble creator is the device whose user initiates the sensing request that leads to the creation of the sensing bubble. The bubble anchor keeps the bubble in the region of interest by broadcasting the sensing request. The sensing node perceives the bubble by listening to the broadcasts, takes samples within the area of interest according sensing request, and then uploads the results to the bubble server. The bubble carrier can help to restore a bubble if all bubble anchors are lost. The bubble server binds the results to the bubble, which can be queried by the bubble creator at any time.

We have implemented the bubble-sensing system using Nokia N95 mobile phones. In Section II, we describe the specific responsibilities of the virtual roles mentioned above and provide details on the communication protocols required to implement these roles. Sections III and IV decribes our current implementation and a preliminary evaluation of bubble-sensing using a N95 testbed, reporting on temporal sensing coverage, and on a measure of sensed data quality. In Section V, we investigate the performance of the system at scale and under a different mobility patter to extend our testbed results. We discuss related work from the pervasive and mobile ad hoc networking communities, including comparisons to alternative implementation choices, in Section VI. In Section VII, we discuss possibilities for extending the current work and offer
concluding remarks.
Reply
sushma18590@gmail.com
Active In SP
**

Posts: 4
Joined: Feb 2011
#2
25-02-2011, 09:55 AM

PLS SEND ME PPT OF Bubble-Sensing: A NEW paradigm for Binding a Sensing Task to the Physical World using mobile phones
Reply
seminar project explorer
Active In SP
**

Posts: 231
Joined: Feb 2011
#3
10-03-2011, 06:28 PM

BUBBLE SENSING

INTRODUCTION
This technology allows the mobile phone users to create a binding between sensing tasks and the physical world at locations of interest. The duration of the connection can be set by the mobile user.
In the present world, the mobile phones have become a ubiquitous tool for communications, computing, and increasingly, sensing.

Applications
sensing request persists at the location till the time limit that is set by the user.
-persistent sensing building block

BUBBLE-SENSING
a number of virtual roles interact in the bubble sensing system .
, a task is a tuple in the bubble sensing system
-The “sensing bubble is the region of interest
-the device whose user initiates the sensing request for creating the sensing bubble is called the bubble creator.

Get the ppt here:

.pptx   BUBBLE SENSING.pptx (Size: 197.94 KB / Downloads: 537)


Reply
seminar class
Active In SP
**

Posts: 5,361
Joined: Feb 2011
#4
16-03-2011, 10:12 AM

Presented by
Vijaya


.ppt   BBS.ppt (Size: 1.44 MB / Downloads: 440)
BUBBLE SENSING
A New Paradigm for Binding a Sensing Task to the Physical World using Mobile Phones
Introduction
 Bubble Sensing System acts as a to support the persistent sensing of a particular location, as required by user requests.
 We adopt a two tier architecture comprising the bubble sever on the back end , and sensor enabled mobile phones as the front end which perform actions like initiating bubbles, maintaining bubbles sampling and reporting sensed data.
Keywords
 Bubble Creator
-device whose user initiates the sensing request that leads to creation of the sensing bubble.
 Bubble Anchor
-keeps the bubble in the region of interest by broadcasting the sensing request.
 Sensing Node
-perceives the bubble by listening to the broadcasts , takes samples according to request and upload the results t the bubble server.
Bubble Sensing
 Sensing task are created and maintained in the bubble-sensing system through the interaction of number of virtual roles.
Major Operations in Bubble Sensing
 Bubble Creation
 Bubble Maintenance
 Location-based
 Mobility-based
 Bubble Restoration
Bubble Creation
 Bubble creator is a mobile device at location of interest with an short range for local peer interaction.
 Creator broadcasts the sensing task.
Bubble Maintenance
 Reason for maintaining the bubble is:
 Uncontrolled mobility of the creator.
àthe creator leaves the bubble location while the task is still active.
àEffect of this, is that no longer appropriate for creator to broadcast the task since recipients will not be in target bubble location.
àSolution is to anchor the bubble to location of interest is needed and the node which takes this role should be relatively stationary at target location of the task.
 Two variants for bubble anchor selection are :
 requires localization capability on all nodes
 Uses inference from an accelerometer for mobility detection.
 All sensing nodes that are able to hear the broadcast messages are called potential anchors.
 Location based:
 In this location based maintenance , the bubbles are maintained based on the location of the bubble created.
 Each candidate anchor backs off a time proportional to its mobility in terms of location fixes.
 Mobility based:
 In this mobility based maintenance , the bubbles are maintained based on the radio range of the mobile phones.
 Each candidate anchor backs off a time proportional to its mobility in terms of data collected by its accelerometer
 Bubble Restoration
 Due to node mobility, it may happen that no nodes are available to anchor the bubble to desired location and bubble may temporarily disappear.
 We can overcome this scenario by using bubble restoration through the actions of the bubble carrier nodes.
 Mobile phones filling this role require localization capability and a connection to backend bubble server.
 Bubble carriers periodically contact the bubble server, update their location, and request any active sensing bubbles in the current region.
 I f a bubble carrier visits location of one of these bubbles and doesn't hear any task broadcasts , it attempts to restore the bubble by broadcasting task without special anchor field set.
 As result ,it either be restored with a new anchor node and takes over bubble maintenance or restoration fails and the process continues via bubble carrier until bubble expires.
Implementation
Programming Language

 The programming language needed is “PYS60” .
PYS60 not only supports the python language and it support the symbian platform.
Communication
 For communication we can use GPRS,3G, Bluetooth and Wi-Fi.
 It uses Ad-Hoc mode when interacting locally with peers, and infrastructure mode to connect to the bubble server.
Challenges
 Increased Bubble Sizes
 Bubble Drift
 Anchor moves
àcan be reduced timeout to the probabilistic limit the bubble drift is limited to desired level.
 Mobility based maintenance
àslow moving anchors in the bubble takes over the role.
Conclusion
 to support persistent location-specific task in a wireless sensor network composed of mobile phones.
 Mobile sensor nodes collaborate and share sensing and communication resources with each other in a cooperative sensing environment.
 virtual roles nodes can assume in support of bubble-sensing, including the required local and backend communication.
Reply
seminar class
Active In SP
**

Posts: 5,361
Joined: Feb 2011
#5
16-03-2011, 11:06 AM


.docx   bubble sensing.docx (Size: 64.22 KB / Downloads: 190)
Abstract
We propose Bubble-Sensing, a new sensor network abstraction that allows mobile phones users to create a binding between tasks (e.g., take a photo, or sample audio every hour indefinitely) and the physical world at locations of interest, that remains active for a duration set by the user. We envision mobile phones being able to affix task bubbles at places of interest and then receive sensed data as it becomes available in a delay-tolerant fashion, in essence, creating a living documentary of places of interest in the physical world. The system relies on other mobile phones that opportunistically pass through bubble-sensing locations to acquire tasks and do the sensing on behalf of the initiator, and deliver the data to the bubblesensing server for retrieval by the user that initiated the task. We describe an implementation of the bubble-sensing system using sensor-enabled mobile phones, specifically, Nokia’s N80 and N95 (with GPS, accelerometers, microphone, camera). Task bubbles are maintained at locations through the interaction of “bubble carriers”, which carry the sensing task into the area of interest, and “bubble anchors”, which maintain the task bubble in the area when the bubble carrier is no longer present. In our implementation, bubble carriers and bubble anchors implement a number of simple mobile-phone based protocols that refresh the task bubble state as new mobile phones move through the area. Phones communicate using the local ad hoc 802.11g radio to transfer task state and maintain the task in the region of interest. This task bubble state is ephemeral and times out when no bubble carriers or bubble anchors are in the area. Our design is resilient to periods when no mobiles pass through the bubble-area and is capable of “reloading” the task into the bubble region. In this paper, we describe the bubble-sensing system and a simple proof of concept experiment.
I. I NTRODUCTION
The mobile phone has become a ubiquitous tool for communications, computing, and increasingly, sensing. Many mobile phone and PDA models (e.g., Nokia’s N95 and 5500 Sport, Apple’s iPhone and iPod Touch, and Sony Ericsson’s W580 and W910) commercially released over the past couple years have integrated sensors (e.g., accelerometer, camera, microphone) that can be accessed programmatically, or support access to external sensor modules connected via Bluetooth. The sensed data gathered from these devices form the basis of a number of new architectures and applications [3] [2] [1] [7] [6]. We present the Bubble-Sensing system, that acts to support the persistent sensing of a particular location, as required by user requests. Conceptually, a user with a phone that has opted into the Bubble-Sensing system visits a location of interest, presses a button on his phone to affix the sensing request to
the location, and then walks away. The sensing request persists at the location until the timeout set by the initiator is reached. This mechanism can be viewed as an application in its own right (e.g., a user slogging [4] his life), and as a persistent sensing building block for other applications. While the notion of virtually affixing sensor tasks to locations is appealing, it requires some work to implement this service on top of a cloud of human-carried phone-based sensors. First, since the mobility of the phones is uncontrolled there is no guarantee that sensors will be well-placed to sample the desired location specified by the sensing task. Further, there is the issue of communicating the sensing task to potential sensers when they are well-positioned. This is made more difficult when, either due to hardware or user policy limitations, an always-on cellular link and localization capabilities are not available on all phones. For example, wireless data access via EDGE, 3G, or open WiFi infrastructure is increasingly available, as is the location service via on-board GPS, WiFi, or cellular tower triangulation. However, for example, only a subset of mobile phones on the market have GPS and WiFi, and even when devices have all the required capabilities, users may disable the GPS and or limit data upload via WiFi and cellular data channels to manage privacy, energy consumption, and monetary cost. Though the mobility in a people-centric sensor network is not controllable, it is also not random. In an urban sensing scenario, the visited areas of interest for one person are likely to be visited by many others (e.g., street corners, bus/subway stations, schools, restaurants, night clubs, etc.). We imagine a heterogeneous system where users are willing to share resources and data and to fulfill sensing tasks. Therefore, the bubble-sensing system opportunistically leverages other mobile phones as they pass by on behalf of a sensing task initiator. We adopt a two tier hardware architecture comprising the bubble server on the back end; and sensor-enabled mobile phones that can initiate sensing bubbles, maintain sensing bubbles in the designated location, replace bubbles that disappear due to phone mobility, enact the sampling as indicated by the sensing bubble, and report the sensed data back to the bubble server. Mobile phones participating in the bubble-sensing system take on one or more roles depending on their mobility characteristic, hardware capabilities, and user profiles. The bubble creator is the device whose user initiates
Reply
seminar addict
Super Moderator
******

Posts: 6,592
Joined: Jul 2011
#6
04-02-2012, 10:57 AM




to get information about the topic bubble sensing full report ,ppt and related topic refer the link bellow

topicideashow-to-ppt-for-bubble-sensing

topicideashow-to-bubble-sensing-a-new-paradigm-for-binding-a-sensing-task-to-the-physical-world-using
scribddoc/37290927/Bubble-Sensing

topicideashow-to-ppt-for-bubble-sensing
Reply
sandeep sharma
Active In SP
**

Posts: 3
Joined: Feb 2012
#7
06-02-2012, 10:41 AM

thanx for the ppt...
Reply
seminar paper
Active In SP
**

Posts: 6,455
Joined: Feb 2012
#8
13-03-2012, 12:12 PM

Hi,
visit this thread for the report of the topic: bubble sensing
topicideashow-to-bubble-sensing-a-new-paradigm-for-binding-a-sensing-task-to-the-physical-world-using
scribddoc/37290927/Bubble-Sensing

topicideashow-to-ppt-for-bubble-sensing
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Pervasive Computing: A Paradigm for the 21st Century study tips 0 599 10-08-2013, 04:07 PM
Last Post: study tips
  PAPER PRESENTATION ON NANO WORLD study tips 0 433 15-05-2013, 03:06 PM
Last Post: study tips
  Physical Layer Authentication for Mobile Terminals over MIMO Fading Wiretap Channels. project girl 0 477 29-01-2013, 04:43 PM
Last Post: project girl
  The Social Impacts of IT in the world seminar flower 0 577 08-08-2012, 12:38 PM
Last Post: seminar flower
  Green: The new color in Information Technology seminar flower 0 671 14-06-2012, 02:59 PM
Last Post: seminar flower
  E-Recruitment -A new facet of HRM seminar ideas 0 650 17-05-2012, 02:01 PM
Last Post: seminar ideas
  Cyber Terrorism Hurdles faced by the wired World seminar ideas 0 467 03-05-2012, 04:30 PM
Last Post: seminar ideas
  Dot Net New Titles-2011 seminar ideas 0 392 21-04-2012, 12:43 PM
Last Post: seminar ideas
  THE WORLD’S FASTEST SUPERCOMPUTER seminar class 0 1,838 25-04-2011, 02:30 PM
Last Post: seminar class
  Bubble-Sensing: A New Paradigm for Binding a Sensing Task to the Physical World using seminar surveyer 0 1,415 13-10-2010, 11:20 AM
Last Post: seminar surveyer