CAN- Based Synchronized Motion Control for Induction Motors
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Active In SP

Posts: 1
Joined: Feb 2010
04-02-2010, 10:18 AM

send clear details about this project and implimentation
Active In SP

Posts: 261
Joined: Feb 2010
04-02-2010, 02:59 PM

CAN-based Synchronized Motion Control for
Induction Motors

A control area network (CAN) based multi-motor synchronized motion control system with an advanced synchronized
control strategy is proposed in this article. adjacent cross-coupling control strategy is incorporated into into the sliding mode control architecture to achieve it.

Sliding-mode adjacent cross-coupling
control strategy of multi-motor synchronization:
Networked control system is flexible and expandable. to improve motion
accuracy, applying the advanced motion control strategy to
the distributed CAN bus synchronized motion control system
becomes very important.
Adjacent cross-coupling control strategy:
If there are n induction motors in the system, each controller of the multi-motor
motion control system is designed to stabilize its speed
tracking, while synchronizing the speed between this controller
and other two controllers with adjacent sequence
number. the synchronized
motions of all motors can be achieved by using the above strategy.

Sliding-mode adjacent cross-coupling
When using this strategy, the
i-th motor synchronization speed controller includes two
parts: one tracking error controller to track the desired speed accurately and two synchronization error controllers to eliminate the synchronization
errors between the controlled motor and its adjacent

Multi-motor synchronized motion
control system based on CAN bus

Applications of CAN bus:
The CAN bus is a serial communication protocol which
supports distributed real-time control with low cost and high reliability.
In the system, the central industrial computer receives speed measurement
messages of each motion controller and sends synchronization
messages to all motion controllers via the CAN. new speed command
adopting the adjacent cross-coupling control strategy
can be calculated based on the prsent recieved signals through the CAN. The motion controller has 32 mailboxes that can be
configured to transmit or receive messages. On recieving
complete speed commands, the motion controller can
select the useful command according to the ID number of the mailbox.

The single motion control system:
The single-motor control
system for an alternating current (AC) induction motor consists of a TI DSP TMS320F2812,
the protection circuit, the insulated gate bipolar transistor
(IGBT) power stage, the AC induction motor with optical
encoder and hall sensors. It converts the instantaneous
motor speed measurement to a packet, and then send it to
the central controller and also sends out pulse
width modulator (PWM) signals to the power stage to drive
the induction motor.

The multi-motor synchronized motion
control system:
It consists of consists of the CAN bus network, the industrial
computer, and some single motion control systems.The communication channel between the industrial
computer and the motion controller is the CAN bus.

Use Search at wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  where can i find old sakshi funday books Guest 1 122 31-10-2016, 12:09 PM
Last Post: anusree
  circuit diagram for remote control bomb blast Guest 1 109 31-10-2016, 10:45 AM
Last Post: amrutha735
  control systems by nagoor kani notes pdf Guest 1 114 31-10-2016, 10:42 AM
Last Post: amrutha735
  star delta starter control wiring diagram with timer filetype pdf Guest 1 86 31-10-2016, 09:52 AM
Last Post: jaseela123
  solutions to nagoor kani exercise problems on control systems Guest 1 94 31-10-2016, 09:36 AM
Last Post: anusree
  future scope of bldc motors speed control Guest 1 140 29-10-2016, 03:13 PM
Last Post: Dhanabhagya
  kinect motion sensing technology seminar report Guest 1 80 29-10-2016, 02:45 PM
Last Post: jaseela123
  control systems nagoor kani exercises problems solved pdf Guest 1 70 29-10-2016, 02:41 PM
Last Post: Dhanabhagya
  full report on seminar topic induction motors Guest 1 70 29-10-2016, 02:36 PM
Last Post: jaseela123
  abstract on high performance motion based handwritten signature recognition Guest 1 51 29-10-2016, 12:54 PM
Last Post: ijasti