CNC MACHINES
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
seminar surveyer
Active In SP
**

Posts: 3,541
Joined: Sep 2010
#1
04-01-2011, 01:19 PM





Presented by
Mr. Prateek Singh
(Vocational Trainee-BHEL Bhopal)



.ppt   cncppt.ppt (Size: 640 KB / Downloads: 689)


INDEX

DEVELOPMENT OF CNC MACHINES

CNC SYSTEM

PROGRAMMABLE LOGIC CONTROLER

SERVO DRIVES

CNC RETROFITTING

MAINTENANCE MANAGEMENT

DEVELOPMENT OF CNC MACHINES
EVOLUTION OF THE CNC MACHINES

CNC MACHINES DEVELOPMENTS

BENEFITS OF CNC MACHINES


EVOLUTION OF THE CNC MACHINES

The first CNC Machine was built in 1949 at MIT ,USA for manufacturing of the Air Craft components having intricate profiles using electron tubes & core memory.


The technology advancement from the Tube technology to the open architecture system has enabled to revolutionize the manufacturing processes.

CNC MACHINES DEVELOPMENTS
VERTICAL MACHINING CENTRE (VMC)

TURRET MACHINING CENTRE (TMC)

HORIZONTAL MACHINING CENTRE (HMC)

UNIVERSAL MACHINING CENTRE (UMC)

CNC TURRET PUNCH PRESS

CNC BENDING MACHINE

CNC UNIVERSAL GRINDING MACHINE

CNC GEAR CUTTING MACHINE

BENEFITS OF CNC MACHINES
INCREASED FLEXIBILITY.

IMPROVED QUALITY.

REDUCED LEAD-TIME.

HIGHER PRODUCTIVITY.

ECONOMICAL BATCH PRODUCTION.

REDUCED CYCLE-TIME.

REDUCED SCRAP GENERATION.




Reply
radhe215
Active In SP
**

Posts: 1
Joined: Mar 2011
#2
04-03-2011, 01:00 PM

send synopsis of cnc machine
Reply
seminar class
Active In SP
**

Posts: 5,361
Joined: Feb 2011
#3
11-03-2011, 03:38 PM

Submitted by
Sudhir S. Shinde


.doc   CNC machine.doc (Size: 612.5 KB / Downloads: 223)
INTRODUCTION
In Industry it is not efficient or profitable to make everyday products by hand. On a CNC machine it is possible to make hundreds or even thousands of the same items in a day. First a design is drawn using design software, and then it is processed by the computer and manufactured using the CNC machine. This is a small CNC machine and can be used to machine woods, plastics and aluminum. In industry, CNC machines can be extremely large.
MEANING OF ‘CNC’
CNC means Computer Numerical Control. This means a computer converts the design into numbers which the computer uses to control the cutting and shaping of the material.
USE OF TYPICAL CNC MACHINE
1. The design is loaded into the computer which is attached to the CNC machine. The computer changes the design into a special code (numerical) that controls the way the CNC cuts and shapes the material.
2. The material to be shaped is taped on to a block with double sided tape. This must be done carefully so that it does not come off the block during machining.
3. The block is then placed in the vice, inside the CNC. It must be tightened up carefully. If it is not secure when the machine starts to cut the material it can come away from the vice. When the machine starts working, the vice moves up, down, right and left according to the design
4. The guard is placed in position. It protects the machine operator in case the material is pulled out of the vice by the power of the cutter. For safety reasons, if the guard is not in position the motor will not start.
5. The CNC is turned on and the shape is cut from the material. When the cutter has stopped the shaped material can be removed from the vice.
PARTS OF CNC MACHINE
VICE: This holds the material to be cut or shaped. Material must be held securely otherwise it may 'fly' out of the vice when the CNC begins to machine. Normally the vice will be like a clamp that holds the material in the correct position.
GUARD: The guard protects the person using the CNC. When the CNC is machining the material small pieces can be 'shoot' off the material at high speed. This could be dangerous if a piece hit the person operating the machine. The guard completely encloses the dangerous areas of the CNC.
CHUCK: This holds the material that is to be shaped. The material must be placed in it very carefully so that when the CNC is working the material is not thrown out at high speed.
MOTOR: The motor is enclosed inside the machine. This is the part that rotates the chuck at high speed.
LATHE BED: The base of the machine. Usually a CNC is bolted down so that it cannot move through the vibration of the machine when it is working.
CUTTING TOOL: This is usually made from high quality steel and it is the part that actually cuts the material to be shaped.
CNC MACHINE - INPUT, PROCESS, OUTPUT
A CNC production facility needs three pieces of equipment:
A Computer:

The computer is used to draw the design. However, the design is only a picture and the CNC machine cannot use this to manufacture the product. The computer software must also convert the drawing into numbers (coordinates) that the CNC machine can use when it starts to cut and shape the material.
An Interface:
A computer cannot be directly connected to a CNC machine. The computer is connected to an interface. This converts the signals from the computer to a form that the CNC machine understands. The signals are in the form of digital signals when they are sent to the CNC machine.
CNC (Computer Numerical Control) Machine:
The signals from the interface control the motors on the CNC machine. The signals determine the way the vice moves. The vice moves in three directions X, Y and Z. (Horizontally, vertically and depth). The signals also control the speed of the cutting tool.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  OPTIMIZATION OF MACHINING PARAMETERS IN CNC TURNING OF MARTENSITIC STAINLESS STEEL seminar flower 1 1,295 28-11-2012, 12:19 PM
Last Post: seminar tips
  FINITE ELEMENT ANALYSIS OF THE FEED DRIVE OF THE SYSTEM IN CNC MACHINE DRIVER seminar flower 0 377 20-10-2012, 11:00 AM
Last Post: seminar flower
  SETTLING-TIME IMPROVEMENTS IN POSITIONING MACHINES SUBJECT TO NONLINEAR FRICTION seminar flower 0 504 17-09-2012, 05:27 PM
Last Post: seminar flower
  CNC-MILLING PROGRAM FOR SQUARE PROFILE TEMPLATE ppt seminar flower 0 946 14-09-2012, 12:07 PM
Last Post: seminar flower
  Milling Machines seminar ideas 0 922 17-05-2012, 04:28 PM
Last Post: seminar ideas
  Synchronous Machines project uploader 0 520 14-03-2012, 10:42 AM
Last Post: project uploader
  TURBO MACHINES Steam and Gas Turbines smart paper boy 0 1,645 02-08-2011, 12:55 PM
Last Post: smart paper boy
  STUDY ON PRINCIPLE AND OPERATIONS OF CNC MACHINES IN VARIOUS FABRICATION PROCESSES smart paper boy 0 1,399 29-07-2011, 09:25 AM
Last Post: smart paper boy
  Theory of Machines and Mechanisms seminar class 0 13,652 07-04-2011, 02:49 PM
Last Post: seminar class
  NC, CNC, DNC Machine seminar class 0 6,816 23-03-2011, 12:11 PM
Last Post: seminar class