Construction Safety Requirements
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
project report helper
Active In SP
**

Posts: 2,270
Joined: Sep 2010
#1
26-10-2010, 01:13 PM



.doc   Construction Safety Requirements.doc (Size: 117.5 KB / Downloads: 81)

Construction Safety Requirements

Construction Safety Requirements

Abrasive Grinding


All abrasive wheel bench and stand grinders must be provided with safety guards that cover the spindle ends, nut and flange project and implimentationions, and are strong enough to withstand the effects of a bursting wheel. An adjustable work rest of rigid construction must be used on floor and bench-mounted grinders, with the work rest kept adjusted to a clearance not to exceed 1/8 inch (0.3175 centimeter) between the work rest and the surface of the wheel.
All abrasive wheels must be closely inspected and ring-tested before mounting to ensure that they are free from cracks or other defects.

Access to Medical and Exposure Records
Each employer must permit employees, their designated representatives, and OSHA direct access to employer-maintained exposure and medical records. The standard limits access only to those employees who are, have been (including former employees), or will be exposed to toxic substances or harmful physical agents. Each employer must preserve and maintain accurate medical and exposure records for each employee. Exposure records and data analyses based on them are to be kept for 30 years. Medical records are to be kept for at least the duration of employment plus 30 years. Background data for exposure records such as laboratory reports and work sheets need to be kept for only 1 year.
Construction Standards.21
Records of employees who have worked for less than 1 year need not be retained after employment, but the employer must provide these records to the employee upon termination of employment. First-aid records of one-time treatment need not be retained for any specified period.



Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  use of discrete fiber in road construction pdf jaseelati 0 623 21-01-2015, 01:15 PM
Last Post: jaseelati
  active reflector for pedestrian safety jaseelati 0 144 13-01-2015, 01:35 PM
Last Post: jaseelati
  user identification and authentication systems must support the minimum requirements jaseelati 0 512 04-12-2014, 01:44 PM
Last Post: jaseelati
  DESIGN AND CONSTRUCTION OF NON CONTACT DIGITAL TACHOMETER REPORT seminar projects maker 0 794 24-09-2013, 03:11 PM
Last Post: seminar projects maker
  The construction of typical liquid flat plate solar collector is shown in figure seminar projects maker 0 349 12-09-2013, 02:10 PM
Last Post: seminar projects maker
  Safety-Critical Systems Design pdf study tips 0 396 17-05-2013, 04:48 PM
Last Post: study tips
  Construction of Optimum Composite Field Architecture for Compact High-Throughput AES study tips 0 427 16-04-2013, 03:03 PM
Last Post: study tips
  Safety Car Parking study tips 0 349 14-02-2013, 02:29 PM
Last Post: study tips
  CONSTRUCTION AND USE OF BROADBAND TRANSFORMERS PPT project girl 0 443 31-01-2013, 11:33 AM
Last Post: project girl
  VEHICLE-TO-VEHICLE AND ROAD-SIDE SENSOR COMMUNICATION FOR ENHANCED ROAD SAFETY pdf project girl 0 366 24-01-2013, 01:00 PM
Last Post: project girl