Contactless Energy Transfer System
Thread Rating:
  • 1 Vote(s) - 1 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator
******

Posts: 3,048
Joined: Dec 2008
#1
21-09-2008, 09:44 AM


Most mains operated equipment in use today is connected to the supply via plugs and sockets. These are generally acceptable in benign environments but can be unsafe or have limited life in the presence of moisture. In explosive atmospheres and in undersea applications special connectors must be used. This paper describes a technique, the Contactless Energy Transfer System (CETS), by which electrical energy maybe transmitted, without electrical connections or physical contact, through non-magnetic media of low conductivity. CETS, which has been used to transfer upto 5KWs across a 10mm gap, employs high frequency magnetic coupling and enables plug in power connections to be made in wet or hazardous environmental conditions without the risk of electric shock, short-circuiting or sparking. Energy may be transmitted without the necessity for accurately manufactured ?plug and socket? mechanisms and may be transmitted from source to load even when there is a relative motion. Load source voltage matching may be made inherent to the system..
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
jerry george
Active In SP
**

Posts: 3
Joined: Jul 2009
#2
19-07-2009, 10:50 AM

yeah i want to know more...
Reply
destiny88
Active In SP
**

Posts: 4
Joined: Jul 2009
#3
25-07-2009, 03:55 PM

yeah i want to know more...
Reply
sabitha
Active In SP
**

Posts: 2
Joined: Jul 2009
#4
26-07-2009, 07:13 PM

what the whole copy
Reply
sabitha
Active In SP
**

Posts: 2
Joined: Jul 2009
#5
26-07-2009, 07:14 PM

want to know more
Reply
be.divya
Active In SP
**

Posts: 1
Joined: Aug 2009
#6
01-08-2009, 04:12 PM

hi evn i wnat to knw more
Reply
arunaswetapadma
Active In SP
**

Posts: 1
Joined: Aug 2009
#7
02-08-2009, 09:52 AM

plz giv us total knowledge abt it
Reply
shabas992
Active In SP
**

Posts: 1
Joined: Aug 2009
#8
09-08-2009, 11:00 AM

(21-09-2008, 09:44 AM)remshad_m Wrote: Most mains operated equipment in use today is connected to the supply via plugs and sockets. These are generally acceptable in benign environments but can be unsafe or have limited life in the presence of moisture. In explosive atmospheres and in undersea applications special connectors must be used. This paper describes a technique, the Contactless Energy Transfer System (CETS), by which electrical energy maybe transmitted, without electrical connections or physical contact, through non-magnetic media of low conductivity. CETS, which has been used to transfer upto 5KWs across a 10mm gap, employs high frequency magnetic coupling and enables plug in power connections to be made in wet or hazardous environmental conditions without the risk of electric shock, short-circuiting or sparking. Energy may be transmitted without the necessity for accurately manufactured ?plug and socket? mechanisms and may be transmitted from source to load even when there is a relative motion. Load source voltage matching may be made inherent to the system..

thnx
Reply
parneet89
Active In SP
**

Posts: 2
Joined: Aug 2009
#9
10-08-2009, 09:38 AM

(21-09-2008, 09:44 AM)remshad_m Wrote: Most mains operated equipment in use today is connected to the supply via plugs and sockets. These are generally acceptable in benign environments but can be unsafe or have limited life in the presence of moisture. In explosive atmospheres and in undersea applications special connectors must be used. This paper describes a technique, the Contactless Energy Transfer System (CETS), by which electrical energy maybe transmitted, without electrical connections or physical contact, through non-magnetic media of low conductivity. CETS, which has been used to transfer upto 5KWs across a 10mm gap, employs high frequency magnetic coupling and enables plug in power connections to be made in wet or hazardous environmental conditions without the risk of electric shock, short-circuiting or sparking. Energy may be transmitted without the necessity for accurately manufactured ?plug and socket? mechanisms and may be transmitted from source to load even when there is a relative motion. Load source voltage matching may be made inherent to the system..
Reply
vaishnavi
Active In SP
**

Posts: 1
Joined: Aug 2009
#10
12-08-2009, 10:32 PM

yeah.. i would like to know more abt it... please do help me... the topic sounds very interesting...
Reply
manjul732
Active In SP
**

Posts: 1
Joined: Aug 2009
#11
13-08-2009, 04:23 PM

tell more about contactless energy transfer
Reply
computer science crazy
Super Moderator
******

Posts: 3,048
Joined: Dec 2008
#12
13-08-2009, 04:56 PM

please read this for more
Contactless Energy Transfer
A Better Solution For A Mobile World
Talk to any plant engineer or production system designer and youâ„¢ll find that electrical wiring is the bane of their existence. From installing the wires, to rewiring as production lines need to be changed, to repairing damage caused by careless workers, electrical wires represent an ongoing cost and risk for downtime in manufacturing plants.
Until recently, the miles of electrical wiring that snake around any manufacturing facility, hanging down from ceilings and extending across corridors between equipment, have been viewed as a necessary aspect of industrial automation.
But today industry is moving toward a wireless world. Like consumers with their cell phones, laptops and PDAâ„¢s, industrial companies want wireless technologies that improve versatility, reduce costs and maintain connectivity. One of the latest developments to draw interest among engineering personnel is contactless energy transfer for powering and controlling motors
While wireless communication is now common in factories, wirelessly transferring 16kW of electricity through the air to power equipment is a relatively new phenomenon in the United States.
In a typical automated manufacturing environment, where carts full of parts must be moved between the different stages of a production process, a contactless system transfers electrical energy inductively from an insulated conductor in a fixed installation to one or more mobile loads. Electromagnetic coupling is realized via an air gap, so it is not subject to wear and costly maintenance.
Contactless energy transfer reduces costs in several ways: It eliminates festooning or overhanging utilities. The underground wiring is compact and poses no trip hazards. There is no carriage to run out on the shop floor. There are also no pits to be dug to drop in trailing utilities.
In addition to lower costs, a mobile system using contactless energy transfer provides greater versatility: The contactless system enables more flexible track layout with curves and switches, simple segmentation of tracks, which makes it easy to extend a track or change travel directions, and higher speeds.
Contactless energy transfer is ideal for applications where:
¢ The mobile equipment has to cover long distances
¢ A variable, extendable track layout is required
¢ High speeds have to be achieved
¢ The energy transfer has to be maintenance free
¢ Additional environmental contaminants are not permitted in sensitive areas
¢ The operation takes place in wet and humid areas
Maintenance and ambient conditions are important factors in constructing systems for material handling and transportation applications, such as automotive assembly, storage and retrieval logistics and sorting. Typical applications that could benefit from contactless energy transfer include:
¢ Overhead trolleys
¢ Conveyor trolleys
¢ Guided floor conveyors
¢ Push-skid conveyors
¢ Storage and retrieval units
¢ Pallet transportation systems
¢ Baggage handling
¢ Panel gantries
¢ Elevator equipment
¢ Amusement park rides
¢ Battery charging stations
By replacing a drag-chain system in a conveyor trolley that transports and sorts pallets, for example, contactless energy transfer enables pallets to transverse over longer distances. Complicated holders for drag chains are eliminated, as is downtime for repairing cable breaks and battery charging. Repairs for wear from bending or torsion are also eliminated.
The wear-free power supply in a contactless system has many advantages in designing and maintaining push-skid conveyors used in automotive assembly, for example, or in storage and retrieval units in a high-bay warehouse. Because there is no conductor rail, there is no danger of introducing contaminants from system leakages and no components that are difficult to reach for maintenance. Problems with fitting the platforms into conveyor belts are also eliminated, since thereâ„¢s no need for high mechanical tolerances between the line cable and pick-up.
Perhaps the biggest advantage of a system based on contactless energy transfer is higher system availability because the system is essentially maintenance free. In a manufacturing environment where change is a constant and speed is an imperative, the versatility, flexibility and reliability of contactless energy transfer systems can reduce the wear-and-tear on plant engineers as well as equipment.
About SEW-EURODRIVE
Engineering excellence and customer responsiveness distinguish SEW-EURODRIVE, a leading manufacturer of integrated power transmission and motion control solutions. SEW introduced the worldâ„¢s first gearmotor more than 75 years ago and its systems are known for high performance and rugged reliability in the toughest operating conditions.
SEW-EURODRIVE offers a comprehensive range of electromechanical and electronic drive solutions. The companyâ„¢s modular product designs allow components to be quickly and cost-efficiently assembled in literally millions of different configurations to create a truly customized solution for every customer.
With its global headquarters in Germany and sales of more than 1.5 billion Euros, the privately held company has more than 11,000 employees with a presence in 46 countries worldwide. SEW operates from 12 manufacturing facilities and 63 regional assembly centers located around the world.
U.S. operations include a state-of-the-art manufacturing facility, five regional assembly centers, more than 60 technical sales offices and hundreds of distributors and support specialists. This enables SEW-EURODRIVE to provide local manufacturing, service and support, coast-to-coast and around the world.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
computer science crazy
Super Moderator
******

Posts: 3,048
Joined: Dec 2008
#13
13-08-2009, 04:57 PM

and this also
deboeijdocs/deboeij_ias2006_cet.pdf
ieeexplore.ieeeiel5/7205/19411/00900035.pdf?arnumber=900035
ta.twi.tudelft.nl/nw/users/vuik/spiral.pdf
highbeamdoc/1G1-158386785.html
lai.epfl.ch/page34944.html
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
tanmay
Active In SP
**

Posts: 10
Joined: Aug 2009
#14
26-08-2009, 08:29 PM

sounds interesting...
plzz send me whole copy...thanks...
Reply
mechanical engineering crazy
Active In SP
**

Posts: 226
Joined: Jul 2009
#15
31-08-2009, 12:07 AM

read this aarticles also
its surely helps you

.pdf   Contactless Energy Transfer System.pdf (Size: 764.03 KB / Downloads: 273)
ccut.edu.tw/adminSection/ee/downloads/StudyContactlessPowerTransmissionSystem.pdf
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Renewable energy ppt seminar tips 1 600 11-04-2016, 09:26 AM
Last Post: mkaasees
  adaptive piezoelectric energy harvesting circuit ppt jaseelati 0 318 09-01-2015, 03:45 PM
Last Post: jaseelati
  Tidal energy which is clean, green sustainable PPT seminar projects maker 0 575 26-09-2013, 02:53 PM
Last Post: seminar projects maker
  An Improved Maximum Power Point Tracker for Photovoltaic Energy Systems pdf seminar projects maker 0 624 13-09-2013, 04:12 PM
Last Post: seminar projects maker
  Introduction to Electric Power and Energy Systems pdf seminar projects maker 0 609 11-09-2013, 04:57 PM
Last Post: seminar projects maker
  A Hybrid Wind-Solar Energy System: A New Rectifier Stage Topology pdf study tips 0 689 06-09-2013, 04:55 PM
Last Post: study tips
  Energy: Forms and Changes PPT study tips 0 428 27-08-2013, 02:03 PM
Last Post: study tips
  Voltage, Current, Energy and Power ppt study tips 0 581 24-08-2013, 02:45 PM
Last Post: study tips
  Energy Theft in the Advanced Metering Infrastructure pdf study tips 0 503 22-08-2013, 03:38 PM
Last Post: study tips
  Energy Efficient Technologies PPT study tips 0 566 22-08-2013, 02:43 PM
Last Post: study tips