Design and Implementation of Control Mechanism for Standby Power Reduction full repor
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
project topics
Active In SP
**

Posts: 2,492
Joined: Mar 2010
#1
25-04-2010, 12:13 PM


Abstract ” In other to save energy, several countries recently made laws related to standby power consumption. To success this exertion, we should consider not only power reduction of consumer electronics itself but also efficient automatic control in networked home environment. In this paper, we present a design approach and implementation result of control mechanism for standby power reduction. Proposed mechanism has the Host-Agent based structure and uses the IEEE 802.15.4 based ZigBee protocol for communication and security between Host and Agents. We verified reliability of proposed mechanism and reduction effect of standby power; also, we applied implemented device to scenario which is similar to user living pattern. Experimental results demonstrate that in the proposed mechanism, standby power consumption of Agent which is connected to consumer electronics can be reduced by 203mW

Presented By:
Joon Heo, Student Member, Choong Seon Hong
I. INTRODUCTION
Standby electricity is the energy consumed by appliances when they are not performing their main functions or when they are switched off. As more and more appliances are being used in households and offices, their energy consumption during standby periods represent a significant share of the total energy used. Household appliances and office equipments such as televisions (TVs), video recorders, audio players, telephone answering and facsimile machines, computers, printers and copiers contribute to this standby loss which is relatively low, with typical loss per appliance ranging from less than 1W to as much as 25W. According to the IEA (International Energy Agency), on an average, 10% of a total household (OECD) power consumption is being wasted in the form of standby power. Moreover, due to the special characteristics of home network devices such as set top box, xDSL modem, home gateway, PC and TV can all be connected to the external communication system in standby mode; an increase of standby power consumption is expected.


read full report
networking.khu.ac.kr/publications/data/Design%20and%20Implementation%20of%20Control%20Mechanism%20for%20Standby%20Power%20Reduction.pdf
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  SEMINAR ON MICRO-HYDRO POWER PLANT PPT study tips 1 962 01-04-2016, 12:07 PM
Last Post: mkaasees
  spurious-power suppression technique (SPST) seminar tips 2 551 12-03-2016, 03:31 PM
Last Post: mkaasees
  POWER FORMER -New trend in powersystem study tips 1 1,225 31-03-2015, 07:03 AM
Last Post: Shahid.jan18@gmail.com
  crank and slotted lever mechanism wiki jaseelati 0 421 13-01-2015, 03:20 PM
Last Post: jaseelati
  self locking mechanism for reverse motion jaseelati 0 313 10-01-2015, 04:24 PM
Last Post: jaseelati
  DETECTING POWER GRID SYNCHRONIZATION FAILURE seminar addict 5 4,286 09-01-2015, 08:16 PM
Last Post: Guest
  automatic power saving conveyor for industrial application jaseelati 0 427 07-01-2015, 04:30 PM
Last Post: jaseelati
  gsm based vehicle theft control system wikipedia jaseelati 0 268 07-01-2015, 02:07 PM
Last Post: jaseelati
  electrical engineering seminar or presentation topics with full report list computer science crazy 11 29,389 12-04-2014, 10:08 PM
Last Post: Guest
  Speed control of Brushless DC motor with DSP controller using Matlab seminar tips 2 1,091 10-01-2014, 12:45 PM
Last Post: seminar project topic