Design and Implementation of Wireless Transceiver System Based on FPGA
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
seminar project explorer
Active In SP
**

Posts: 231
Joined: Feb 2011
#1
14-02-2011, 06:44 PM


Design and Implementation of Wireless Transceiver System Based on FPGA
The article describes a wireless data transmission and reciever system using FPGA and the RF chip. The system is meant for short distance communication only. The core of the system is a SOPC embedded in FPGA and the necessary peripheral circuits. The SOPC solution allows designers to embed soft-core of
the MCU to the generic FPGA. The SOPC technology mainly
refers to the chip-oriented system-level ASIC design of
computer technology as opposed to the ASIC design technology. The the burst mode transmission of wireless data under the control of FPGA is also introduced by this article. The design of wireless communication that is in the half duplex mode and involving burst mode was a challenge. The system can easily realize the wireless data transmission and also can work smoothly and steadily. The SOPC Builder and Quartus II are used for design of the entire system. An FPGA device belonging to the Cyclone I family of Altera is used in the project and implimentation and the design is downloaded onto this FPGA. A very agile, and easy to debug is resulted from the project and implimentation. simple structure, low-budget, low power consumption are the other advantages of the system.

The above SOPC design is based on IP (Intellectual
property) core and the main design means for it is the hardware description language which is carried out using the EDA tools.

Get the report here:
mediafire?hp62qqgg95c8h98
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  DESIGN ATM CONTROLLER pdf seminar flower 1 963 22-07-2016, 02:13 PM
Last Post: mkaasees
  WIRELESS MIROSERWER seminar ideas 2 662 09-04-2016, 12:35 PM
Last Post: mkaasees
  MICROCONTROLLER BASED PICK AND PLACE ROBOT projectsofme 10 9,425 21-02-2015, 03:56 AM
Last Post: nalzanbagi
  wireless electricity transmission ppt jaseelati 0 320 09-02-2015, 02:38 PM
Last Post: jaseelati
  gps based border alert system for fishermen jaseelati 0 276 31-01-2015, 03:19 PM
Last Post: jaseelati
  global wireless e-voting ppt jaseelati 0 317 23-01-2015, 04:19 PM
Last Post: jaseelati
  coin based toll gate system jaseelati 0 236 23-01-2015, 03:49 PM
Last Post: jaseelati
  ppt on trends in wireless computing jaseelati 0 263 21-01-2015, 03:23 PM
Last Post: jaseelati
  high voltage fuse blown indicator with voice based announcement system jaseelati 0 322 15-01-2015, 03:58 PM
Last Post: jaseelati
  wireless power theft monitoring system and indication at local substations. jaseelati 0 356 10-01-2015, 03:42 PM
Last Post: jaseelati