Design and Implementation of a Socket with Low Standby power (project and implimentation guidence)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
sekharchandra216
Active In SP
**

Posts: 6
Joined: Dec 2009
#1
21-12-2009, 10:12 PM


Hi can u give details about "Design and Implementation of a Socket with Low Standby power"
Reply
ajukrishnan
Moderator
*****

Posts: 213
Joined: Dec 2009
#2
22-12-2009, 08:17 PM

This socket supplies the appliances with power when the user turns them on. When the user turns them off,this socket shuts the electric power off and reduces the standby power to zero.This can be a solution to electric home appliances
drawing standby power when they are plugged in.The design uses an MCU which receives signals from a PIR sensor which detects the user when approaching the socket and the appliances. A power detector provides an MCU to control the
SSR On/Off when used as an appliance switch for shutting off the standby power.The components used dissipate very little power. The MCU monitoring program provides both automatic detection of the user by the PIR sensor and detection of power consumption.
When the user is detected by the PIR sensor , the power for the electric home appliances is enabled. Conversely, if the PIR sensor doesnâ„¢t detect the user,
the power is cut off as the appliances were unplugged. If the appliances are working but the user leaves, the power continues to come from the socket until the work is finished. Because of this requirement there is the the power detector circuit.A microcontroller unit (MCU) controls the solid state relay (SSR) to supply the power for electric home appliances.
Power detector ckt:
we use the toroidal coil inductor as a current sensor that detects whether the appliance is working. When an AC current passes through an inductor, a small
sinusoidal voltage is induced.This small voltage is amplified and converted into a DC signal by the diodes and capacitors and is then given to a comparator, compared with the predefined voltage value to determine whether the appliance is in the work state or not.
This design design requires 5 V DC from the AC/DC converter as the working voltage.the power detector circuit and the MCU are integrated in a board, and other circuits are connected to the board.

Detailed report with circuit diagram and drawings:

.pdf   Design and Implementation of a Socket with Low Standby Power.pdf (Size: 305.84 KB / Downloads: 119)
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  bz-fad low power shift and add multiplier katkam 5 2,732 20-05-2016, 11:39 AM
Last Post: Dhanabhagya
  WIND POWER TO CHARGE BATTERY IN AUTOMOBILE Vilaskumar 2 1,597 21-12-2015, 01:08 AM
Last Post: Guest
Lightbulb Need design diagrams on the Project-Government scheme management system archanachitta 6 3,392 28-12-2014, 10:58 AM
Last Post: Guest
  Fog Computing Mitigating Insider Data Theft Attacks in the Cloud project and implimentation full docum mtamilselvan 2 3,026 24-12-2014, 10:43 AM
Last Post: Tushar4142
  project and implimentation on fingerprint age determination using matlab Guest 4 1,497 18-09-2014, 03:30 PM
Last Post: Radhika.m
  about ns2 implementation bantipatil 0 343 20-08-2014, 04:20 PM
Last Post: bantipatil
  A wireless design of low-cost irrigation system using Zigbee technology vishnu447 5 3,456 20-07-2014, 04:40 PM
Last Post: maggihallows
  implementation of video steganography using LSB technique in MATLAB d000304a 3 3,808 15-07-2014, 04:39 PM
Last Post: mkaasees
  project and implimentation on shares and dividends Guest 1 1,933 24-05-2014, 09:30 AM
Last Post: saad ansari
  Design and development of skill and activity tracker system sai@strikes 0 500 30-04-2014, 03:53 PM
Last Post: sai@strikes