Digger Bit with A Hammer Assembly
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
project report helper
Active In SP
**

Posts: 2,270
Joined: Sep 2010
#1
30-09-2010, 09:46 AM



.doc   Project.doc (Size: 2.37 MB / Downloads: 152)

Digger Bit with A Hammer Assembly


Mini Project
On
Digger Bit with A Hammer Assembly

CVSR College Of Engineering
Vinod Kumar Dasari (06H61A0350)
Gayathri Duggirala (06H61A0315)
Gopi Shanmukha Sai (06H61A0317)
Nishanth Kumar .K (07H65A0314)
Laxminarayana (07H65A0312)

Department Of Mechanical Engineering


ABSTRACT

As we, all know that bore wells are used to extract water from the earth. The earth is dug using a tool called BUTTON BITS. Button bit is a tool that blasts the rocks and breaks into pieces, which are on its way during the drilling operation and make the operation easy.
The material used for manufacturing the bits is EN 36 C. Especially this type of material is used because it posses all the required qualities of the operation such as it gives a very hard surface and can be case hardened with a strong core and retaining high degree of toughness in order to resist wear and tear while hitting the hard rock and penetration into the soil.
The life of the bit is about 2000 feet and depending up of the type of soil the life of bit may vary. Depending upon the requirement different types of bits are used. Some of them are drifter bits, which are used for mining and blasting purposes, panther bits, and digger bits are used for water well drilling.
The hammers are the source of providing the blows on the bits for the blasting of rocks.
The Down-The-Hole Hammer is a pneumatically operated bottom-hole drill that efficiently combines the hitting action; the pneumatic drill can be used on any standard rotary rig with an integral or auxiliary air compressor of sufficient capacity. It is applied for fast and economical drilling of medium to extremely hard formations. Fast penetration results from the air piston blows transmitted directly to the bit, so practically no energy is wasted in chewing up cuttings. Short, rapid blows that minimize the effect of dipping and broken formations assure a straight hole
Types of Dth Hammers - Jet Dth Hammers, Thunder Dth Hammers, Panther Dth Hammer, Valued/Valveless Dth Hammers, Down the Hole Hammers, Hippo Dth Hammers, Digger Dth Hammers, Conventional Dth Hammers, Hybrid Dth Hammers, Cluster Dth Hammer, Large Diameter (Dth) Hammers, Largest Hyper Hammers, Recirculation Dth Hammers, Water Well Dth Drilling Hammers, Stunner Dth Hammer, Bench Drilling Dth Hammers, Exploring, Mining Dth Hammers.



Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  DESIGN OF SHAFT AND ROTOR ASSEMBLY FOR ROTARY AIRLOCK VALUE REPORT study tips 0 565 15-02-2013, 12:39 PM
Last Post: study tips
  AGRI MACHINERY GROUP ASSEMBLY PLANT seminar flower 0 730 06-10-2012, 10:53 AM
Last Post: seminar flower
  Study of Performance Related Measures in Automotive Assembly Lines seminar ideas 0 525 12-04-2012, 02:49 PM
Last Post: seminar ideas
  ASSEMBLY AND DIS-ASSEMBLY OF 6-CYLINDER COMPRESSION IGNITION ENGINE AND ITS SYSTEMS seminar class 0 1,792 19-04-2011, 01:14 PM
Last Post: seminar class
  Cavitation in Engine Cooling Fluid due to Piston-Cylinder Assembly Forces electronics seminars 0 2,088 09-01-2010, 05:27 PM
Last Post: electronics seminars