Dual Energy X-ray Absorptiometry
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
electronics seminars
Active In SP
**

Posts: 694
Joined: Nov 2009
#1
12-11-2009, 11:56 AM



.doc   Dual Energy X-ray Absorptiometry.doc (Size: 3.08 MB / Downloads: 187)
ABSTRACT

The basic principles of Dual Energy X-ray Absorptiometry have been discussed in this presentation. DEXA is a instrumental technique used to measure bone mineral density (BMD), which is the widely accepted indicator of bone strength. DEXA scanner is the most widely used modern electronic machine to diagnose the disease osteoporosis, the thinning of bones. Human body being a heterogeneous system, use of a dual energy, rather than single energy, X-ray source is necessary for scanning. The interaction of the sample with the X-ray beams results in a reduction or attenuation of the energy of the X-ray beam. The extent to which the photon energy is attenuated is a function of the initial energy of the X-ray photon, the mass per unit area (M) of the absorber material and the mass attenuation coefficient (U) of the absorber. For a given absorber material, U (which is a measure of the degree of attenuation) is a constant at any given photon energy.
U increases with the density of the absorber material and decreases with the energy of the X-ray beam. U can be used to calculate the Mass per unit area (M) of a homogenous absorber irradiated at a specific incident X-ray energy. The mass of bone and soft tissue Ëœbelowâ„¢ this square would represent the mass per unit area of the absorber, viz., leg. For instance, if there are 100 grams of bone and soft tissue below this square, the mass per unit area (M) would be 100 g/cm2. Knowledge of M of the human body components, especially of bone, is important in determining the possibility of osteoporosis. The calculations of M of the various components of the body are discussed in detail.
From knowledge of mass attenuation coefficient (U) of the absorber and the energy of the incident X-ray beam (E0) and of the emerging beam (E), we can calculate M of a homogeneous absorber from the following relationship connecting these properties.






1. INTRODUCTION


Dual Energy X-ray Absorptiometry (DEXA) is an instrumental technique used to measure bone mineral density (BMD) that includes the hip and spine, compared to SXA (Single Energy X-ray Absorptiometry) that measures only the wrist or heel bone. BMD is the widely accepted indicator of bone strength.

DEXA (the whole body scanner) uses low dose x-rays to give us information on bone content and density. It is currently the most widely used machine in the clinical setting to diagnose the disease osteoporosis, the thinning of bones.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Wireless Energy Meter pdf study tips 2 1,123 23-02-2013, 09:30 AM
Last Post: seminar tips
  Energy measuring Instruments seminar ideas 0 1,050 26-04-2012, 10:41 AM
Last Post: seminar ideas