EURO V
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator
******

Posts: 3,048
Joined: Dec 2008
#1
20-09-2008, 10:34 PM


EURO V is the most recent set in a series of mandatory European emission standards applying to new road vehicles sold in the EU. For heavy duty vehicles (lorries) the standards apply to vehicles brought on the market from October 2008. It requires Heavy Goods Vehicles (HGVs) to emit no more than 2.0 g/kWh of NOx and 0.02 g/kWh of PM. As yet, there is no Euro V standard applying for passenger cars, but a recent proposal suggests to limit diesel car emissions to 0.200 g/km of NOx and 0.005 g/km of Particulate Matter (PM), petrol cars to 0.060 g/km NOx and 0.005 g/km PM.

The standards do not mandate the application of specific technologies, but it is widely expected that diesel particulate filters will need to be fitted in diesel vehicles to comply with the PM standard.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
Preetam G N
Active In SP
**

Posts: 1
Joined: Sep 2009
#2
27-09-2009, 08:44 PM

please provide a full information on this topic
Reply
Electrical Fan
Active In SP
**

Posts: 438
Joined: Aug 2009
#3
28-09-2009, 06:51 PM

European emission standards define acceptable limits for exhaust emissions of new vehicles sold in EU member states. The emission standards defined in a series of European Union directives staging the progressive introduction of increasingly stringent standards. Currently, emissions of Nitrogen oxides (NOx), Total hydrocarbon (THC), Non-methane hydrocarbons (NMHC), Carbon monoxide (CO) and particulate matter (PM) are regulated for most vehicle types, including cars, lorries, tractors and similar machinery, barges, but excluding seagoing ships and aero planes. For each vehicle type, different standards apply. Compliance is determined by running the engine at a standardized test cycle. Non-compliant vehicles cannot be sold in the EU, but new standards do not apply to vehicles already on the roads. No use of specific technologies is mandated to meet the standards, though available technology considered when setting the standards. New models introduced must meet current or planned standards, but minor lifecycle model revisions may continue to offered with pre-compliant engines. In the early 2000s, Australia began harmonizing Australian Design Rule certification for new motor vehicle emissions with Euro categories. Euro III was introduced on 1 January 2006 and is progressively being introduced to align with European introduction dates.


see more in en.wikipediawiki/European_emission_standards
dieselnetstandards/eu/ld.php
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  EURO V computer science crazy 0 952 07-04-2009, 10:29 PM
Last Post: computer science crazy