Evaluation of a Gamma Titanium Aluminide for Hypersonic Structural Applications
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Computer Science Clay
Active In SP
**

Posts: 712
Joined: Jan 2009
#1
07-06-2009, 09:52 AM


Titanium matrix composites (TMCs) have been extensively evaluated for their potential to replace conventional superalloys in high temperature structural applications, as they provide significant weight-savings while maintaining comparable mechanical properties. Gamma titanium aluminide alloys and an appropriate fiber could offer an improved TMC for use in intermediate temperature applications (400-800°C). The purpose of this investigation is aimed at evaluating the potential of a gamma titanium aluminide alloy with nominal composition Ti-46.5Al-4(Cr,Nb,Ta,B)at.% as a matrix material in future aerospace transportation systems, where very light-weight structures are necessary to meet the goals of advanced aerospace programs. Monotonic tests were performed on thin rolled sheet product to evaluate basic mechanical properties and stress-strain behavior of the gamma titanium alloy. Coupons of SCS-6/gamma TiAl were manufactured at NASA LaRC. Analytical predictions were made of the optimal composite stress-strain response using AGLPLY. An [0]4 composite lay-up was modeled to estimate residual stresses after consolidation and the potential of these composites as structural materials. The analysis considered various fiber volume ratios and two potential reinforcing fibers: Ultra-SCS and Nextel 610. High residual stresses were observed due to the CTE mismatch in the materials. Laminates with Nextel 610 fibers were found to offer the best potential for a composite in this comparison. The laminate coupons manufactured cracked during cooling due to the large thermal mismatch between the silicon carbide fibers and the matrix material.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  STRUCTURAL ANALYSIS OF TWO WHEELER SUSPENSION FRAME pdf study tips 0 603 10-09-2013, 04:53 PM
Last Post: study tips
  Nonferrous Metals and Alloys: Production, General Properties, and Applications study tips 0 397 20-08-2013, 01:22 PM
Last Post: study tips
  Experimental Compression – Resorption Heat Pump For Industrial Applications report study tips 0 390 03-07-2013, 04:48 PM
Last Post: study tips
  STRUCTURAL ASPECT OF SYMMETRY IN PLANETARY GEAR TRAINS pdf study tips 0 378 05-03-2013, 02:38 PM
Last Post: study tips
  Theoretical and Experimental Evaluation of Vapour Absorption Refrigeration System pdf study tips 0 524 19-02-2013, 04:40 PM
Last Post: study tips
  A “Wearable” Artificial Hand for Prosthetics and Humanoid Robotics Applications pdf seminar tips 0 625 09-02-2013, 04:41 PM
Last Post: seminar tips
  SELF HEALING MATERIALS AND APPLICATIONS seminar tips 0 430 29-01-2013, 02:48 PM
Last Post: seminar tips
  APPLICATIONS OF NOS IN AUTOMOBILES projectsofme 2 2,407 28-01-2013, 04:11 PM
Last Post: seminar tips
  A Seminar Report On APPLICATIONS OF MOBILE ROBOTIC SYSTEM AND CASE STUDY project girl 0 486 16-01-2013, 11:29 AM
Last Post: project girl
  INTRODUCTION TO STRUCTURAL STEEL DESIGN pdf project girl 0 391 03-01-2013, 03:16 PM
Last Post: project girl