FUEL CELLS-Evolving Concepts and Developments full report
Thread Rating:
  • 1 Vote(s) - 2 Average
  • 1
  • 2
  • 3
  • 4
  • 5
project report tiger
Active In SP

Posts: 1,062
Joined: Feb 2010
16-02-2010, 09:55 AM

.pptx   fuel cell.pptx (Size: 797.31 KB / Downloads: 604)
FUEL CELLS-Evolving Concepts and Developments


Output of conventional batteries are limited.
They are polluting.
Continuous operation results in fall in efficiency.
Output not stable under long durations of operations.

Fuel Cells

An Electrochemical energy conversion device
Produces electricity from external fuel and oxidant.
Can operate virtually continuously as long as the necessary flows are maintained.

General Structure

Two electrodes sandwiched around an electrolyte
Hydrogen fuel is fed into the anode
Oxygen enters through the cathode.

Solid Oxide Fuel Cell
Permeable electrodes are used.
Hydrogen from fuel and oxygen permeate the corresponding electrodes.
Electrons flow through the external circuit.


High efficiency
Fuel flexibility
Can use a variety of catalysts
Solid electrolyte reduces electrolyte management problems
Suitable for CHP
Slow start-up
Brittleness of ceramic electrolyte with thermal cycling

Proton Exchange Membrane Fuel Cell

A Hydrogen- Oxygen fuel cell.
Uses a polymer membrane along with electrolyte.
Anode splits hydrogen into proton and electron.
The membrane allows only the proton to pass.
Electrons take the external circuit, forming current.
Membrane prevents leakage of gas from either side into electrolyte.

Microbial Fuel Cells

Bio-electrochemical system that uses microbes for oxidation of fuel, normally organic matter.
In anode compartment, fuel is oxidised by bacteria, to release protons and electrons.
Protons pass through a cation- specific membrane and reach the cathode through the electrolyte.
Electrons flow through the external circuit.
The result of the reaction is clean water, so can be used to treat waste water, etc.


Mediator Microbial Fuel Cell

Most of the microbial cells are electrochemically inactive. The electron transfer from microbial cells to the electrode is facilitated by mediators such as thionine, methyl blue, neutral red, etc.
Mediator-less Microbial Fuel Cell
Do not need mediators.
Use electrochemically active bacteria like Shewanella putrefaciens or Aeromonas hydrophila to transfer electrons to the electrode (electrons are carried directly from the bacterial respiratory enzyme to the electrode).

Protonic Ceramic Fuel Cell

Uses ceramic electrolyte that shows high protonic conductivity at high temperatures.
Suitable for use at elevated temperature.
Reforming of fuel to hydrogen not necessary
Since electrolyte is solid, no danger of drying up or leakage.



Either connected to power grid as back up or supplementary power or independent in inaccessible areas.
Waste heat generated can be used for other purposes.
Since silent, no noise pollution.

To provide highly reliable power to telecommunication systems, either as back-up or primary.
Independent of weather and durable.
Used in telecom switching nodes, mobile phone towers, etc.
Landfills/Wastewater Treatment Plants/Breweries
Methane gas evolving can be used as fuel for fuel cells.
Can use microbial fuel cells also.
Reduces effluents and poisonous gases.

Passenger Cars: Initiatives like Freedom Car and California Fuel Cell Partnership have brought close the dream of a fuel cell powered car, expected to release commercially in 2010.
Buses: Over 50 buses already tested in various country.
Use of fuel cells for trains, aeroplanes and boats are under research.

Auxilliary Power in vehicles.

To keep amenities like air conditioning and heater running when vehicle is stopped.
Also used in most submarines.
Portable Power
May be used where there is no power network.
May be used by defense personnel in remote places of combat.
Consumer Electronics

For use as laptop and cellular phone batteries, to last much longer.
Can be used to work portable power tools such as drills.
Used in Apollo mission, as it provides power, heat and potable water.
Since then used in most manned space missions.
seminar topics
Active In SP

Posts: 559
Joined: Mar 2010
31-03-2010, 10:57 PM

A fuel cell is a device that electrochemically converts the chemical energy of a fuel and an oxidant to electrical energy. The fuel and oxidant are typically stored outside of the fuel cell and transferred into the fuel cell as the reactants are consumed. The most common type of fuel cell uses the chemical energy of hydrogen to produce electricity, with water and heat as by-products. Fuel cells are unique in terms of the variety of their potential applications; they potentially can provide energy for systems as large as a utility power station and as small as a laptop computer.
Fuel cells have several potential benefits over conventional combustion-based technologies currently used in many power plants and passenger vehicles. They produce much smaller quantities of greenhouse gases and none of the air pollutants that create smog and cause health problems. If pure hydrogen is used as a fuel, fuel cells emit only heat and water as a byproduct.
Fuel Cell Systems
The design of fuel cell systems is complex and can vary significantly depending upon fuel cell type and application. However, most fuel cell systems consist of four basic components: Fuel cell stack, Fuel processor, Current converter, Heat recovery system.
Most fuel cell systems also include other components and subsystems to control fuel cell humidity, temperature, gas pressure, and wastewater.
Fuel Cell Stack
The fuel cell stack is the heart of a fuel cell power system. It generates electricity in the form of direct current (DC) from chemical reactions that take place in the fuel cell. A single fuel cell produces enough electricity for only the smallest applications. Therefore, individual fuel cells are typically combined in series into a fuel cell stack. A typical fuel cell stack may consist of hundreds of fuel cells. The amount of power produced by a fuel cell depends upon several factors, such as fuel cell type, cell size, the temperature at which it operates, and the pressure at which the gases are supplied to the
Fuel Processor
The fuel processor converts fuel into a form useable by the fuel cell. If hydrogen is fed to the system, a processor may not be required or it may only be needed to filter impurities out of the hydrogen gas.
If the system is powered by a hydrogen-rich conventional fuel such as methanol, gasoline, diesel, or gasified coal, a reformer is typically used to convert hydrocarbons into a gas mixture of hydrogen and carbon compounds called "reformate." In many cases, the reformate is then sent to another reactor to remove impurities, such as carbon oxides or sulfur, before it is sent to the fuel cell stack. This prevents impurities in the gas from binding with the fuel cell catalysts. This binding process is also called "poisoning" since it reduces the efficiency and life expectancy of the fuel cell.
Some fuel cells, such as molten carbonate and solid oxide fuel cells, operate at temperatures high enough that the fuel can be reformed in the fuel cell itself. This is called internal reforming. Fuel cells that use internal reforming still need traps to remove impurities from the unreformed fuel before it reaches the fuel cell.
Both internal and external reforming release carbon dioxide, but less than the amount emitted by internal combustion engines, such used in gasoline-powered vehicles.
Current Inverters and Conditioners
Current inverters and conditioners adapt the electrical current from the fuel cell to suit the electrical needs of the application, whether it is a simple electrical motor or a complex utility power grid.
Fuel cells produce electricity in the form of direct current (DC). In a direct current circuit, electricity flows in only one direction. The electricity in your home and work place is in the form of alternating current (AC), which flows in both directions on alternating cycles. If the fuel cell is used to power equipment using alternating current, the direct current will have to be converted to alternating current.
Both AC and DC power must be conditioned. Power conditioning includes controlling current flow (amperes), voltage, frequency, and other characteristics of the electrical current to meet the needs of the application. Conversion and conditioning reduce system efficiency only slightly, around 2 to 6 percent.
Heat Recovery System
Fuel cell systems are not primarily used to generate heat. However, since significant amounts of heat are generated by some fuel cell systems”especially those that operate at high temperatures such as solid oxide and molten carbonate systems”this excess energy can be used to produce steam or hot water or converted to electricity via a gas turbine or other technology. This increases the overall energy efficiency of the systems.
Types of Fuel Cells
Fuel cells are classified primarily by the kind of electrolyte they employ. This determines the kind of chemical reactions that take place in the cell, the kind of catalysts required, the temperature range in which the cell operates, the fuel required, and other factors. These characteristics, in turn, affect the applications for which these cells are most suitable. There are several types of fuel cells currently under development, each with its own advantages, limitations, and potential applications.
Polymer Electrolyte Membrane (PEM) Fuel Cells

Polymer electrolyte membrane (PEM) fuel cells”also called proton exchange membrane fuel cells”deliver high power density and offer the advantages of low weight and volume, compared to other fuel cells. PEM fuel cells use a solid polymer as an electrolyte and porous carbon electrodes containing a platinum catalyst. They need only hydrogen, oxygen from the air, and water to operate and do not require corrosive fluids like some fuel cells. They are typically fueled with pure hydrogen supplied from storage tanks or onboard reformers.
Polymer electrolyte membrane fuel cells operate at relatively low temperatures, around 80°C (176°F). Low temperature operation allows them to start quickly (less warm-up time) and results in less wear on system components, resulting in better durability. However, it requires that a noble-metal catalyst (typically platinum) be used to separate the hydrogen's electrons and protons, adding to system cost. The platinum catalyst is also extremely sensitive to carbon monoxide (CO) poisoning, making it necessary to employ an additional reactor to reduce CO in the fuel gas if the hydrogen is derived from an alcohol or hydrocarbon fuel. This also adds cost. Developers are currently exploring platinum/ruthenium catalysts that are more resistant to CO.
PEM fuel cells are used primarily for transportation applications and some stationary applications. Due to their fast startup time, low sensitivity to orientation, and favorable power-to-weight ratio, PEM fuel cells are particularly suitable for use in passenger vehicles, such as cars and buses.
A significant barrier to using these fuel cells in vehicles is hydrogen storage. Most fuel cell vehicles (FCVs) powered by pure hydrogen must store the hydrogen onboard as a compressed gas in pressurized tanks. Due to the low energy density of hydrogen, it is difficult to store enough hydrogen onboard to allow vehicles to travel the same distance as gasoline-powered vehicles before refueling, typically 300-400 miles. Higher-density liquid fuels such as methanol, ethanol, natural gas, liquefied petroleum gas, and gasoline can be used for fuel, but the vehicles must have an onboard fuel processor to reform the methanol to hydrogen. This increases costs and maintenance requirements. The reformer also releases carbon dioxide (a greenhouse gas), though less than that emitted from current gasoline-powered engines.
Direct Methanol Fuel Cells
Most fuel cells are powered by hydrogen, which can be fed to the fuel cell system directly or can be generated within the fuel cell system by reforming hydrogen-rich fuels such as methanol, ethanol, and hydrocarbon fuels. Direct methanol fuel cells (DMFCs), however, are powered by pure methanol, which is mixed with steam and fed directly to the fuel cell anode.
Direct methanol fuel cells do not have many of the fuel storage problems typical of some fuel cells since methanol has a higher energy density than hydrogen”though less than gasoline or diesel fuel. Methanol is also easier to transport and supply to the public using our current infrastructure since it is a liquid, like gasoline.
Direct methanol fuel cell technology is relatively new compared to that of fuel cells powered by pure hydrogen, and DMFC research and development are roughly 3-4 years behind that for other fuel cell types.
Alkaline Fuel Cells

Alkaline fuel cells (AFCs) were one of the first fuel cell technologies developed, and they were the first type widely used in the U.S. space program to produce electrical energy and water onboard spacecraft. These fuel cells use a solution of potassium hydroxide in water as the electrolyte and can use a variety of non-precious metals as a catalyst at the anode and cathode. High-temperature AFCs operate at temperatures between 100°C and 250°C (212°F and 482°F). However, newer AFC designs operate at lower temperatures of roughly 23°C to 70°C (74°F to 158°F).
AFCs' high performance is due to the rate at which chemical reactions take place in the cell. They have also demonstrated efficiencies near 60 percent in space applications.
The disadvantage of this fuel cell type is that it is easily poisoned by carbon dioxide (CO2). In fact, even the small amount of CO2 in the air can affect this cell's operation, making it necessary to purify both the hydrogen and oxygen used in the cell. This purification process is costly. Susceptibility to poisoning also affects the cell's lifetime (the amount of time before it must be replaced), further adding to cost.
Cost is less of a factor for remote locations such as space or under the sea. However, to effectively compete in most mainstream commercial markets, these fuel cells will have to become more cost-effective. AFC stacks have been shown to maintain sufficiently stable operation for more than 8,000 operating hours. To be economically viable in large-scale utility applications, these fuel cells need to reach operating times exceeding 40,000 hours, something that has not yet been achieved due to material durability issues. This is possibly the most significant obstacle in commercializing this fuel cell technology.
Phosphoric Acid Fuel Cells

Phosphoric acid fuel cells (PAFCs) use liquid phosphoric acid as an electrolyte”the acid is contained in a Teflon-bonded silicon carbide matrix”and porous carbon electrodes containing a platinum catalyst. The chemical reactions that take place in the cell are shown in the diagram to the right.
The phosphoric acid fuel cell is considered the "first generation" of modern fuel cells. It is one of the most mature cell types and the first to be used commercially, with over 200 units currently in use. This type of fuel cell is typically used for stationary power generation, but some PAFCs have been used to power large vehicles such as city buses.
PAFCs are more tolerant of impurities in fossil fuels that have been reformed into hydrogen than Polymer electrolyte membrane (PEM) fuel cells, which are easily "poisoned" by carbon monoxide”carbon monoxide binds to the platinum catalyst at the anode, decreasing the fuel cell's efficiency. They are 85 percent efficient when used for the co-generation of electricity and heat, but less efficient at generating electricity alone (37 to 42 percent). This is only slightly more efficient than combustion-based power plants, which typically operate at 33 to 35 percent efficiency. PAFCs are also less powerful than other fuel cells, given the same weight and volume. As a result, these fuel cells are typically large and heavy. PAFCs are also expensive. Like PEM fuel cells, PAFCs require an expensive platinum catalyst, which raises the cost of the fuel cell. A typical phosphoric acid fuel cell costs between $4,000 and $4,500 per kilowatt to operate.
Molten Carbonate Fuel Cells

Molten carbonate fuel cells (MCFCs) are currently being developed for natural gas- and coal-based power plants for electrical utility, industrial, and military applications. MCFCs are high-temperature fuel cells that use an electrolyte composed of a molten carbonate salt mixture suspended in a porous, chemically inert ceramic lithium aluminum oxide (LiAlO2) matrix. Since they operate at extremely high temperatures of 650°C (roughly 1,200°F) and above, non-precious metals can be used as catalysts at the anode and cathode, reducing costs.
Improved efficiency is another reason MCFCs offer significant cost reductions over phosphoric acid fuel cells (PAFCs). Molten carbonate fuel cells can reach efficiencies approaching 60 percent, considerably higher than the 37-42 percent efficiencies of a phosphoric acid fuel cell plant. When the waste heat is captured and used, overall fuel efficiencies can be as high as 85 percent.
Unlike alkaline, phosphoric acid, and polymer electrolyte membrane fuel cells, MCFCs don't require an external reformer to convert more energy-dense fuels to hydrogen. Due to the high temperatures at which MCFCs operate, these fuels are converted to hydrogen within the fuel cell itself by a process called internal reforming, which also reduces cost.
Molten carbonate fuel cells are not prone to carbon monoxide or carbon dioxide "poisoning"”they can even use carbon oxides as fuel”making them more attractive for fueling with gases made from coal. Because they are more resistant to impurities than other fuel cell types, scientists believe that they could even be capable of internal reforming of coal, assuming they can be made resistant to impurities such as sulfur and particulates that result from converting coal, a dirtier fossil fuel source than many others, into hydrogen.
The primary disadvantage of current MCFC technology is durability. The high temperatures at which these cells operate and the corrosive electrolyte used accelerate component breakdown and corrosion, decreasing cell life. Scientists are currently exploring corrosion-resistant materials for components as well as fuel cell designs that increase cell life without decreasing performance.
Solid Oxide Fuel Cells

Solid oxide fuel cells (SOFCs) use a hard, non-porous ceramic compound as the electrolyte. Since the electrolyte is a solid, the cells do not have to be constructed in the plate-like configuration typical of other fuel cell types. SOFCs are expected to be around 50-60 percent efficient at converting fuel to electricity. In applications designed to capture and utilize the system's waste heat (co-generation), overall fuel use efficiencies could top 80-85 percent.
Solid oxide fuel cells operate at very high temperatures”around 1,000°C (1,830°F). High temperature operation removes the need for precious-metal catalyst, thereby reducing cost. It also allows SOFCs to reform fuels internally, which enables the use of a variety of fuels and reduces the cost associated with adding a reformer to the system.
SOFCs are also the most sulfur-resistant fuel cell type; they can tolerate several orders of magnitude more sulfur than other cell types. In addition, they are not poisoned by carbon monoxide (CO), which can even be used as fuel. This allows SOFCs to use gases made from coal.
High-temperature operation has disadvantages. It results in a slow startup and requires significant thermal shielding to retain heat and protect personnel, which may be acceptable for utility applications but not for transportation and small portable applications. The high operating temperatures also place stringent durability requirements on materials. The development of low-cost materials with high durability at cell operating temperatures is the key technical challenge facing this technology.
Scientists are currently exploring the potential for developing lower-temperature SOFCs operating at or below 800°C that have fewer durability problems and cost less. Lower-temperature SOFCs produce less electrical power, however, and stack materials that will function in this lower temperature range have not been identified.
Regenerative Fuel Cells
Regenerative fuel cells produce electricity from hydrogen and oxygen and generate heat and water as by-products, just like other fuel cells. However, regenerative fuel cell systems can also use electricity from solar power or some other source to divide the excess water into oxygen and hydrogen fuel”this process is called "electrolysis." This is a comparatively young fuel cell technology being developed by the National Aeronautics and Space Administration (NASA) and others.
Transportation Applications

Fuel cells can be used to provide propulsion or auxiliary power for many transportation applications. Aside from spacecraft, which typically use alkaline fuel cells for onboard power, polymer electrolyte membrane (PEM) fuel cells are the primary type used in transportation.
Few fuel-cell-powered transportation products are currently in use today; even fewer are available commercially. A handful of fuel-cell-based passenger cars have been leased to government and universities, but they are not yet available for sale to the public. About 200 auxiliary power units have been used in U.S. and Russian spacecraft.
Highway vehicles. Since highway vehicles account for a large share of petroleum use, carbon dioxide (a primary greenhouse gas) emissions, and air pollution, advances in fuel cell power systems for vehicles could substantially improve our energy security and air quality. While fuel-cell-powered cars are not yet available commercially, almost every major auto manufacturer has a fuel-cell vehicle program, with various targets for demonstration between 2003 and 2006.
Other highway-based applications include large passenger buses and long-haul trucks. Fuel cell auxiliary power units (APUs) for commercial trucks could also reduce energy use and emissions, since these vehicles must often run while idle to provide electricity for refrigeration, heaters and air conditioners, and sleeper compartment accessories.
Other surface transportation. Other potential surface transportation applications include rail locomotives, mining locomotives, scooters, and personal mobility vehicles for the disabled.
Aerospace. Fuel cells are often used in aerospace applications. They have been used to provide auxiliary power in spacecraft since the 1960s all 18 Apollo missions and over 100 Space Shuttle missions. Other similar applications include powering near-Earth orbit (NEO) satellites.
Marine vessels. Ships and submarines are another possible application for fuel cells, providing both propulsion and auxiliary power. Recreational and personal watercraft may also be powered by fuel cells.
Stationary Power Potential Applications

Stationary power is the most mature application for fuel cells. Stationary fuel cell units are used for backup power, power for remote locations, stand-alone power plants for towns and cities, distributed generation for buildings, and co-generation (in which excess thermal energy from electricity generation is used for heat).
Approximately 600 systems that produce 10 kilowatts or more have been built and operated worldwide to date, most fueled by natural gas. Phosphoric acid fuel cells (PAFCs) have typically been used for large-scale applications, but molten carbonate and solid oxide designs have begun to compete with PAFCs and may be commercialized in a few years.
It is estimated that more than a thousand smaller stationary fuel cells (less than 10 kilowatts) have been built and operated to power homes and provide backup power. Polymer electrolyte membrane (PEM) fuel cells fueled with natural gas or hydrogen are the primary design used for these smaller systems.
Portable Power

Fuel cells can be used to power a variety of portable devices, from handheld electronics such as cell phones and radios to larger equipment such as portable generators. Other potential applications include laptop computers, personal digital assistants (PDAs), and handheld video cameras-almost any application that has traditionally used batteries. These fuel cells have the potential to last more than three times as long as batteries between refueling. In addition to these smaller applications, fuel cells can be used in portable generators, such as those used to provide electricity for portable equipment.
It is estimated that about 1,700 portable fuel cell systems have been developed and operated worldwide, ranging from 1 watt to 1.5 kilowatts in power. The two primary technologies for portable applications are polymer electrolyte membrane (PEM) and direct methanol fuel cell (DMFC) designs. Most portable, fuel-cell-powered products are still in the development and demonstration stages. However, a handful of devices, such as portable power generators, are available commercially on a very limited basis.
Technology Challenges
Cost and durability are the major challenges to fuel cell commercialization. However, hurdles vary according to the application in which the technology is employed. Size, weight, and thermal and water management are barriers to the commercialization of fuel cell technology. In transportation applications, these technologies face more stringent cost and durability hurdles. In stationary power applications, where cogeneration of heat and power is desired, use of PEM fuel cells would benefit from raising operating temperatures to increase performance. The key challenges include:
Cost. The cost of fuel cell power systems must be reduced before they can be competitive with conventional technologies. Currently the costs for automotive internal combustion engine power plants are about $25-$35/kW; for transportation applications, a fuel cell system needs to cost $30/kW for the technology to be competitive. For stationary systems, the acceptable price point is considerably higher ($400-$750/kW for widespread commercialization and as much as $1000/kW for initial applications).
Durability and Reliability. The durability of fuel cell systems has not been established. For transportation applications, fuel cell power systems will be required to achieve the same level of durability and reliability of current automotive engines, i.e., 5,000 hour lifespan (150,000 miles equivalent), and the ability to function over the full range of vehicle operating conditions (40°C to 80°C). For stationary applications, more than 40,000 hours of reliable operation in a temperature at -35°C to 40°C will be required for market acceptance.
System Size. The size and weight of current fuel cell systems must be further reduced to meet the packaging requirements for automobiles. This applies not only to the fuel cell stack, but also to the ancillary components and major subsystems (e.g., fuel processor, compressor/expander, and sensors) making up the balance of power system.
Air, Thermal, and Water Management. Air management for fuel cell systems is a challenge because today's compressor technologies are not suitable for automotive fuel cell applications. In addition, thermal and water management for fuel cells are issues because the small difference between the operating and ambient temperatures necessitates large heat exchangers.
Improved Heat Recovery Systems. The low operating temperature of PEM fuel cells limits the amount of heat that can be effectively utilized in combined heat and power (CHP) applications. Technologies need to be developed that will allow higher operating temperatures and/or more effective heat recovery systems and improved system designs that will enable CHP efficiencies exceeding 80%. Technologies that allow cooling to be provided from the low heat rejected from stationary fuel cell systems (such as through regenerating dessiccants in a desiccant cooling cycle) also need to be evaluated.
courtesy and read more

Attached Files
.doc   fuel cell.doc (Size: 140.5 KB / Downloads: 181)
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
seminar addict
Super Moderator

Posts: 6,592
Joined: Jul 2011
04-02-2012, 11:25 AM

to get information about the topic fuel cells full report ,ppt and related topic refer the link bellow







Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  robots in radioactive environment full report project report tiger 14 16,579 27-04-2015, 07:00 PM
Last Post: Guest
  large scale power generation using fuel cell abstract jaseelati 0 182 18-12-2014, 02:44 PM
Last Post: jaseelati
  Pistonless Pump for Rockets full report and ppt project topics 8 10,489 15-11-2014, 04:08 PM
Last Post: mkaasees
  DRAG REDUCTION IN SHIPS USING MICROBUBBLES TECHNOLOGY full report project report tiger 4 7,454 24-03-2014, 04:27 PM
Last Post: seminar project topic
  Testing Of Bearings on Sound and Vibration Quality full report seminar class 1 2,450 09-10-2013, 03:16 PM
Last Post: Guest
  machine gun full report project report tiger 3 5,630 08-10-2013, 07:04 PM
Last Post: pc-alert
  How do Fuel Cells Compare to Internal Combustion Engines and Batteries? seminar projects maker 0 505 14-09-2013, 04:18 PM
Last Post: seminar projects maker
  SEMINAR REPORT On Fuel Energizer seminar projects maker 0 611 12-09-2013, 01:07 PM
Last Post: seminar projects maker
  micromachining full report project report tiger 4 10,091 02-09-2013, 10:10 AM
Last Post: study tips
  SUSPENSION SYSTEM full report seminar topics 18 29,536 20-08-2013, 07:43 PM
Last Post: vishnuts