FUZZY LOGIC CONTROL OF A SWITCHED RELUCTANCE MOTOR
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
projectsofme
Active In SP
**

Posts: 1,124
Joined: Jun 2010
#1
08-10-2010, 03:44 PM



.doc   FUZZY LOGIC CONTROL OF A SWITCHED RELUCTANCE MOTOR documentation.doc (Size: 1.11 MB / Downloads: 140)
FUZZY LOGIC CONTROL OF A SWITCHED RELUCTANCE MOTOR



Abstract

This paper presents the use of fuzzy logic control (FLC) for switched reluctance motor (SRM) speed. The FLC performs a PI-like control strategy, giving the current reference variation
based on speed error and its change. The performance of the drive system was evaluated through digital simulations through the toolbox Simulink of Matlab program.

INTRODUCTION

The switched reluctance motor (SRM) has becoming an attractive alternative in variable speed drives, due to its advantages such as structural simplicity, high reliability and low cost . Many papers have been written about SRM concerning design and control . An important characteristic of the SRM is that the inductance of the magnetic circuit is a nonlinear function of the phase current and rotor position. So, for the control and optimization of this drive, a precise magnetic model is necessary. To obtain this model is not an easy task, because the magnetic circuit operates at varying levels of saturation
under operating conditions . Further, the nonlinear characteristic of this plant represents a challenge to classical control. To overcome this drawback, some alternatives have been suggested, using fuzzy and neuronal systems.

This paper proposes to control SR drives using fuzzy logic control (FLC), which is mainly applied to complex plants, where it is difficult to obtain accurate mathematical model or when the
model is severely nonlinear. FLC has the ability to handle numeric and linguistic knowledge simultaneously.

In this paper we present a study by simulation of the use of a FLC for SR drive. The SRM simulated has a strusture of six poles on the stator and four on the rotor and power of 1 HP . The nonlinear model of this motor was simulated with the Matlab Simulink package and two tables were used to represent the nonlinearities: I(θ,λ), current in function of rotor position and flux, and τ(θ,I) , torque in function of rotor position and current. The objective of the FLC is to present a good performance, even if the two tables for a given motor were not accurately determined.
The proposed control can be divided in two parts. The first employs FLC and will generate current reference variations, based on speed error and its change. The second one has the function of selecting the phase that should be fed to optimize the torque, based on rotor position.
Reply
seminar paper
Active In SP
**

Posts: 6,455
Joined: Feb 2012
#2
29-02-2012, 10:16 AM

to get information about the topic switched reluctance motor full report ppt and related topic refer the link bellow

topicideashow-to-four-quadrant-control-of-switched-reluctance-motors-full-report

topicideashow-to-fuzzy-logic-control-of-a-switched-reluctance-motor

topicideashow-to-switched-reluctance-motor-full-report

topicideashow-to-dynamic-simulation-of-switched-reluctance-motor-using-matlab-and-fuzzy-logic

topicideashow-to-performance-analysis-of-switched-reluctance-motor-design-modeling-and-simulation-of
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  gsm based vehicle theft control system wikipedia jaseelati 0 270 07-01-2015, 02:07 PM
Last Post: jaseelati
  Speed control of Brushless DC motor with DSP controller using Matlab seminar tips 2 1,093 10-01-2014, 12:45 PM
Last Post: seminar project topic
  CLOSE LOOP CONTROL OF CONVERTER FED DC DRIVES study tips 2 636 10-01-2014, 12:45 PM
Last Post: seminar project topic
  Occupant Detection and Temperature Control seminar tips 1 758 18-12-2013, 01:44 AM
Last Post: mwesoze3rd
  Speed Control of Single Phase Induction Motor Using Short Message Service ppt seminar ideas 1 1,847 06-11-2013, 11:31 AM
Last Post: Guest
  Switched Reluctance Motor Report seminar projects maker 0 629 30-09-2013, 02:54 PM
Last Post: seminar projects maker
  DESIGN OF AUTOMATIC CHANGE OVER SWITCH WITH GENERATOR CONTROL MECHANISM pdf seminar projects maker 0 2,212 25-09-2013, 12:54 PM
Last Post: seminar projects maker
  Introduction to Programmable Logic Devices PPT seminar projects maker 0 443 21-09-2013, 03:51 PM
Last Post: seminar projects maker
  Simulation using all the modeling styles and Synthesis of all the logic gates seminar projects maker 0 379 14-09-2013, 03:13 PM
Last Post: seminar projects maker
  Combinational Logic Implementation Technologies PPT seminar projects maker 0 507 12-09-2013, 03:32 PM
Last Post: seminar projects maker