Fiber Distributed Data Interface
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator
******

Posts: 3,048
Joined: Dec 2008
#1
21-09-2008, 10:57 AM


Definition
The Fiber Distributed Data Interface (FDDI) standard was produced by the ANSI X3T9.5 standards committee in the mid-1980s. During this period, high-speed engineering workstations were beginning to tax the capabilities of existing local-area networks (LANs) (primarily Ethernet and Token Ring). A new LAN was needed that could easily support these workstations and their new distributed applications. At the same time, network reliability was becoming an increasingly important issue as system managers began to migrate mission-critical applications from large
computers to networks. FDDI was developed to fill these needs.

After completing the FDDI specification, ANSI submitted FDDI to the International Organization for Standardization (ISO). ISO has created an international version of FDDI that is completely compatible with the ANSI standard version.

Today, although FDDI implementations are not as common as Ethernet or Token Ring, FDDI has gained a substantial following that continues to increase as the cost of FDDI interfaces diminishes. FDDI is frequently used as a backbone technology as well as a means to connect high-speed computers in a local area.

Technology Basics
FDDI specifies a 100-Mbps, token-passing, dual-ring LAN using a fiber-optic transmission medium. It defines the physical layer and media-access portion of the link layer, and so is roughly analogous to IEEE 802.3 and IEEE 802.5 in its relationship to the Open System Interconnection (OSI) reference model.

Although it operates at faster speeds, FDDI is similar in many ways to Token Ring. The two networks share many features, including topology (ring), media-access technique (token passing), reliability features (redundant rings, for example), and others. For more information on Token Ring and related technologies.

One of the most important characteristics of FDDI is its use of optical fiber as a transmission medium. Optical fiber offers several advantages over traditional copper wiring, including security (fiber does not emit electrical signals that can be tapped), reliability (fiber is immune to electrical interference), and speed (optical fiber has much higher throughput potential than copper cable). FDDI defines use of two types of fiber: single mode (sometimes called monomode) and multimode. Modes can be thought of as bundles of light rays entering the fiber at a particular angle. Single-mode fiber allows only one mode of light to propagate through the fiber, while multimode fiber allows multiple modes of light to propagate through the fiber. Because multiple modes of light propagating through the fiber may travel different distances (depending on the entry angles), causing them to arrive at the destination at different times (a phenomenon called modal dispersion), single-mode fiber is capable of higher bandwidth and greater cable run distances than multimode fiber. Due to these characteristics, single-mode fiber is often used for interbuilding connectivity, while multimode fiber is often used for intrabuilding connectivity. Multimode fiber uses light-emitting diodes (LEDs) as the light-generating devices, while single-mode fiber generally uses lasers.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
vasanthi26
Active In SP
**

Posts: 2
Joined: Jun 2010
#2
17-06-2010, 03:18 PM

pls send me the information of [b]fiber distributedndata interface [/b]seminar and presentation topic in ieeeformat
Reply
computer science topics
Active In SP
**

Posts: 610
Joined: Jun 2010
#3
17-06-2010, 04:56 PM

please read topicideashow-to-fiber-distributed-data-interface-full-report and topicideashow-to-fiber-distributed-data-interface--6428 to get more information of the topic Fiber Distributed Data Interface , if you want again more "information"/"specific details" then please relply (with details) in that page , hope our friends like you may add their thought to help you



i hope you enjoyed it
if yes,i welcomes you to active participation in seminar and presentation/project and implimentation/technical discussions here for helping other students issues , or hope you next time come with a good topic and will apreciate everyone


Best Wishes...
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
seminar paper
Active In SP
**

Posts: 6,455
Joined: Feb 2012
#4
08-02-2012, 04:56 PM

Fiber Distributed Data Interface


.doc   report.doc (Size: 225 KB / Downloads: 36)
Introduction
FDDI (Fiber-Distributed Data Interface) is a standard for data transmission on fiber optic lines in that can extend in range up to 200 km (124 miles). The FDDI protocol is based on the token ring protocol. In addition to being large geographically, an FDDI local area network can support thousands of users.
An FDDI network contains two token rings, one for possible backup in case the primary ring fails. The primary ring offers up to 100 Mbps capacity. If the secondary ring is not needed for backup, it can also carry data, extending capacity to 200 Mbps. The single ring can extend the maximum distance; a dual ring can extend 100 km (62 miles).
FDDI is a product of American National Standards Committee X3-T9 and conforms to the open system interconnect (OSI) model of functional layering. It can be used to interconnect LANs using other protocols. FDDI-II is a version of FDDI that adds the capability to add circuit-switched service to the network so that voice signals can also be handled. Work is underway to connect FDDI networks to the developing Synchronous Optical Network.

Full Support of FDDI ANSI Standards

Fiber Distributed Data Interface (FDDI) is an American National Standards Institute
(ANSI) standard definition of a high-speed (100 megabits per second) local area network
(LAN) based on optical fiber technology. Clear Path HMP NX and A Series servers can
access an FDDI LAN through either of the following channel adapters:
1. FDDI channel adapter style CA601-FDI or CA602-FDI.This channel adapter fully supports the ANSI FDDI standard. It provides a fiber optical connection to an FDDI network.
2. CDDI channel adapter style CA604-CDI. This channel adapter supports the ANSI TP-PMD standard for category 5 (data grade) unshielded twisted-pair (UTP) connections. It provides an electrical connection to the FDDI network.

How Does an FDDI Network Work?

An FDDI network uses duplex fiber-optic cable for point-to-point connections between a
number of stations to form two closed loops. The two rings, designated as primary and
secondary, operate as counter-rotating rings. Each of these counter-rotating rings
comprises a single logical ring. If a dual ring experiences a problem in the fiber medium or
at a station, the stations on each side of the failure automatically wrap the primary and
secondary rings to form a single logical ring.
Stations on the trunk or primary ring gain access to transmit onto the ring by capturing a
free token off the network. The token is a series of bits indicating whether the ring is
available for use or not. The token is transferred from one station to the next, providing
each station the opportunity to transfer data. Each station regenerates and repeats each
symbol. Once the token is captured, data is transmitted onto the network in formatted
FDDI frames. After all data is transferred onto the network, the token is released to the
network to be picked up by another station.
All stations read each FDDI frame as it passes around the ring. When a station determines
that it is the intended recipient, it extracts data from the frame but still retransmits the
frame to the next station on the ring. When the frame returns to the originating station,
that station “strips” the frame from the network.

FUNCTION OF FDDI

1. Background
The Fiber Distributed Data Interface (FDDI) specifies a 100-Mbps token-passing, dual-ring LAN using fiber-optic cable. FDDI is frequently used as high-speed backbone technology because of its support for high bandwidth and greater distances than copper. It should be noted that relatively recently, a related copper specification, called Copper Distributed Data Interface (CDDI) has emerged to provide 100-Mbps service over copper. CDDI is the implementation of FDDI protocols over twisted-pair copper wire. This chapter focuses mainly on FDDI specifications and operations, but it also provides a high-level overview of CDDI.
Reply
seminar addict
Super Moderator
******

Posts: 6,592
Joined: Jul 2011
#5
11-02-2012, 12:29 PM

to get information about the topic electronic nose full report ,ppt and related topic refer the link bellow

topicideashow-to-electronic-nose-full-report

topicideashow-to-electronic-nose-and-its-applications-seminar and presentation-report

topicideashow-to-electronic-nose-download-full-seminar and presentation-report

topicideashow-to-electronic-nose-download-full-seminar and presentation-report?page=2

topicideashow-to-electronic-nose-full-report--8224

topicideashow-to-electronic-nose-full-report?page=2

topicideashow-to-electronic-nose-technology

topicideashow-to-electronic-nose-full-report?page=3

topicideashow-to-electronic-nose-full-report?pid=53277

seminar and presentationproject and implimentationsshowthread.php?tid=293&google_seo=t3ga++++++++++++++++++++++&pid=66763#pid66763
Reply
seminar flower
Super Moderator
******

Posts: 10,120
Joined: Apr 2012
#6
02-07-2012, 12:51 PM

FIBER DISTRIBUTED DATA INTERFACE


.ppt   FIBER DISTRIBUTED DATA INTERFACE.ppt (Size: 758 KB / Downloads: 16)
Introduction

Shared media network like Ethernet ( IEEE 802.3) & IBM token ring (IEEE 802.5)
100 mbps speed
Runs on optical fiber
American National Standards Institute (ANSI) standard

FDDI Basic Principle

Token ring network like IEEE 802.5
Token: a special sequence of bits
Token circulates around the ring
A station removes the token from ring before transmission
After transmission, the station returns the token to the ring
Collisions are prevented as there is only one token in the ring
Token ring network like IEEE 802.5
Token: a special sequence of bits
Token circulates around the ring
A station removes the token from ring before transmission
After transmission, the station returns the token to the ring
Collisions are prevented as there is only one token in the ring

FDDI Physical Properties

Dual-counter-rotating token ring architecture
One ring is primary and the other secondary
Up to 500 stations with a maximum distance of 2 km between any pair of stations for multimode fiber
With single-mode fiber the distance can be up to 40 km
Maximum ring length is 100 km (total fiber length is 200 km for two rings)

FDDI Architectural Model

According to the OSI-RM, FDDI specifies layer 1 (physical layer) and part of layer 2 (data link control layer)
The physical layer handles the transmission of raw bits over a communications link
The data link control (dlc) layer is responsible for maintaining the integrity of information exchanged between two points


Reply
seminar flower
Super Moderator
******

Posts: 10,120
Joined: Apr 2012
#7
03-07-2012, 01:40 PM

FIBER DISTRIBUTED DATA INTERFACE


.ppt   FIBER DISTRIBUTED DATA.ppt (Size: 758.5 KB / Downloads: 23)
Introduction

Shared media network like Ethernet ( IEEE 802.3) & IBM token ring (IEEE 802.5)
100 mbps speed
Runs on optical fiber
American National Standards Institute (ANSI) standard

FDDI Basic Principle

Token ring network like IEEE 802.5
Token: a special sequence of bits
Token circulates around the ring
A station removes the token from ring before transmission
After transmission, the station returns the token to the ring
Collisions are prevented as there is only one token in the ring

FDDI Architectural Model

According to the OSI-RM, FDDI specifies layer 1 (physical layer) and part of layer 2 (data link control layer)
The physical layer handles the transmission of raw bits over a communications link
The data link control (dlc) layer is responsible for maintaining the integrity of information exchanged between two points

The PMD Layer

PMD layer defines the type of media interconnection and its characteristics such as transmitter power, frequencies, receiver sensitivities, bit error rates (per), optical components etc.
PMD-MMF: MultiMode (62.5 micron core diameter) Fiber
PMD-SMF: Single-Mode (8-10 micron core diameter) Fiber
Also defines STP, UTP as media and FDDI on SONET

The PHY layer

Provides the media independent functions associated with the OSI physical layer
Reception: decodes the received bit stream from PMD into a symbol stream for use by the mac layer
Transmission: encodes the data and control symbols provided by mac using 4b/5b encoding for the PMD layer
Also provides SMT the services required for the establishment and maintenance of the FDDI ring (by continuously listening to the incoming signal)

Applications of FDDI

Office automation at the desktop
Backbones for factory automation
Backend data center applications
Campus LAN interconnection
Intercampus Backbones Or Metropolitan Area Networks (mans)
Interconnection of private branch exchanges (pbxs)
Workgroup and departmental LANs
Integrated transport for multimedia applications




Reply
Guest
Thinking To Register

 
#8
24-07-2012, 07:05 PM

Dear sir,

We have established automatic fly ash brick plant & we want to mix nano fibre to get good quality & strength kindly send your qoutation asap.

Regards,

Sunil Tiwari
Brick Plant
jindal steel & power ltd
Raigarh(cg)
INDIA
09827477996
Reply
seminar ideas
Super Moderator
******

Posts: 10,003
Joined: Apr 2012
#9
25-07-2012, 10:23 AM

to get information about the topic "Fiber Distributed Data Interface" full report ppt and related topic refer the link bellow

topicideashow-to-fiber-distributed-data-interface-full-report

topicideashow-to-fiber-distributed-data-interface

topicideashow-to-fiber-distributed-data-interface?page=2

topicideashow-to-fiber-distributed-data-interface--6428
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Novel High Step-Up DC-DC Converter for Distributed Generation System pdf study tips 0 565 12-08-2013, 03:58 PM
Last Post: study tips
  Resolving the impact of distributed renewable generation on directional overcurrent study tips 0 375 10-08-2013, 12:45 PM
Last Post: study tips
  ARRANGE AN ARRAY OF DATA IN DESCENDING ORDER study tips 0 325 03-08-2013, 02:33 PM
Last Post: study tips
  ARRANGE AN ARRAY OF DATA IN ASCENDING ORDER study tips 0 329 03-08-2013, 02:32 PM
Last Post: study tips
  SMALLEST NUMBER IN AN ARRAY OF DATA study tips 0 311 03-08-2013, 02:31 PM
Last Post: study tips
  LARGEST NUMBER IN AN ARRAY OF DATA study tips 0 476 03-08-2013, 02:30 PM
Last Post: study tips
  TO STUDY THE TECHNIQUE GENERATION OF TDM DATA study tips 0 396 20-07-2013, 02:58 PM
Last Post: study tips
  STUDY OF NUMERICAL APERTURE OF OPTICAL FIBER study tips 0 514 20-07-2013, 02:57 PM
Last Post: study tips
  STUDY OF LOSSES IN OPTICAL FIBER study tips 0 401 20-07-2013, 02:55 PM
Last Post: study tips
  SETTING UP OF FIBER OPTIC “DIGITAL LINK” study tips 0 325 20-07-2013, 02:54 PM
Last Post: study tips