Flywheel Batteries
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator
******

Posts: 3,048
Joined: Dec 2008
#1
20-09-2008, 10:36 PM


With the ever-increasing demand for energy, we have to focus our attention on greener alternatives. The main problems with non-conventional energy sources are that they need storage. Flywheel batteries seem to solve this problem to a great extend. Flywheel energy storage systems are non-polluting; need no replacement and little maintenance. The basic working of flywheel batteries and their applications are discussed in brief. Flywheel batteries stores energy as rotational kinetic energy of the flywheel and this energy can be retrieved either through direct mechanical or electrical translation..
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
faisalmoideen
Active In SP
**

Posts: 4
Joined: Jul 2009
#2
02-08-2009, 03:19 PM

give the full reports of this seminar and presentation
Reply
ashish0505gt
Active In SP
**

Posts: 2
Joined: Aug 2009
#3
26-08-2009, 04:31 PM

Please send me a full report on Flywheel batteries along with a powerpoint presentation.
I would be very grateful.My e-mail id is ashish0505gt@yahoo.co.in

Ashish
Reply
mechanical engineering crazy
Active In SP
**

Posts: 226
Joined: Jul 2009
#4
28-08-2009, 05:00 AM

Flywheel Batteries

A friend of mine recently installed solar panels on his roof to generate electricity. They were quite expensive, but my friend considers it an investment that will pay for itself in lower electricity bills over a period of decades. Of course, the panels generate electricity only when the sun is shining. The house is still connected to the electrical grid just like every other house in the neighborhood, but in such a way that it uses electricity from the grid only when the demand is greater than the output from the solar panels. When the panels are producing more electricity than is being used, the electric meter spins backward, and the electric company effectively buys the excess power. So if there were a power outage, the house would have electricity only during the day.

Homes that are off the grid and use solar panels or windmills to produce electricity must store the excess for times when insufficient power is being produced. The usual way to do this is to install a large bank of lead-acid batteries, similar to the ones used in cars. When electricity is being generated, itâ„¢s stored in the batteries, and when itâ„¢s needed, itâ„¢s drained from the batteries. The very same principle is used in hybrid gasoline-electric cars, on the International Space Station and in a number of satellites and spacecraft. Itâ„¢s also fundamental to an uninterruptible power supply (UPS), which you can purchase to keep your computer going for a while or provide emergency lighting in the event of a power outage.

Battery Up
But thereâ„¢s a problem with using batteries for storing electricity: they wear out. Even the most sophisticated modern batteries used in cell phones and laptops can only be discharged and recharged a finite number of times; sooner or later, they refuse to hold a charge. Depending on the type of battery and how itâ„¢s used, the lifespan can be as little as three to five years. Now, buying a new laptop battery every few years for $50 is one thing, but buying enough batteries to power a whole house is going to be enormously expensive. Meanwhile, those old batteries will need to be disposed of very carefully, because they contain toxic elements. And letâ„¢s not forget that such high-capacity batteries are both heavy and bulky. If youâ„¢re using them to power a space station, youâ„¢re going to face considerable inconvenience in replacing them.


Although chemical batteries are likely to be around for a very long time, those with a need for high-capacity, long-term electricity storage are eagerly looking for alternatives. One such alternative is based on a very old and simple device: the flywheel. A flywheel is simply a heavy spinning wheel that stores kinetic energy and then releases it as needed. Flywheels are common in mechanical devices from pottersâ„¢ wheels to automobiles to clocks as a means of regulating or smoothing motion that comes in spurts. Because a flywheel can build up a good bit of inertia, it can keep a mechanism moving during lulls in energy input.

Now people are turning flywheels into batteries. Conceptually, a flywheel battery is very simple. Hook up a motor to a flywheel to spin it when electricity is supplied (storing the energy as kinetic energy). When you want to retrieve energy from the flywheel, hook it up to a generator. (In fact, the motor and the generator can be one and the same.) So you put electricity in and get electricity out, and in the meantime itâ„¢s stored as the motion of a spinning wheel.


Putting a New Spin on It
As you might expect, however, it™s not quite that simple. Because of the forces of gravity and friction, any flywheel will eventually dissipate all its energy and spin down. So for long-term storage, you want a design with as little friction as possible”which can be accomplished using magnetic bearings to make the wheel float and enclosing it in a vacuum to eliminate air resistance. Capacity is another issue. The greater the mass of the wheel and the faster it spins, the more energy it holds”though you improve efficiency more by increasing the speed than you do by increasing the mass. However, the faster you spin a flywheel, the more centrifugal force will build up, potentially causing it to shatter. So materials must be chosen (or created) very carefully, and the entire assembly must also be well shielded, in case the wheel shatters due to a defect or other problem. In the last decade or so, technological solutions to these problems have begun to present themselves, and modern flywheel batteries, which put out about ten times the power for their weight as lead-acid batteries, are beginning to appear with life expectancy ratings of 20 years or more.

Two problems that have not yet been solved are cost and scalability. Although it™s possible to purchase a flywheel battery to act as a backup power supply for your home or business, it will set you back many thousands of dollars”enough to pay for quite a few years™ worth of batteries. And you won™t see a flywheel battery small enough to power handheld devices or large enough to power a city block. Still, in an era that values devices with no moving parts as a design triumph, it™s fascinating to watch a good old-fashioned spinning wheel emerge as the battery of the future
In a world where everything from our automobiles to our underwear may soon run on electricity, more efficient portable power is a major concern. After a century of stagnation, chemical and ultracapacitor batteries have recently made some strides forward, and more are on the horizon. But the most promising way of storing energy for the future might come from a more unlikely source, and one that far predates any battery: the flywheel.

In principle, a flywheel is nothing more than a wheel on an axle which stores and regulates energy by spinning continuously. The device is one of humanity™s oldest and most familiar technologies: it was in the potter™s wheel six thousand years ago, as a stone tablet with enough mass to rotate smoothly between kicks of a foot pedal; it was an essential component in the great machines that brought on the industrial revolution; and today it™s under the hood of every automobile on the road, performing the same function it has for millennia”now regulating the strokes of pistons rather than the strokes of a potter™s foot.

Ongoing research, however, suggests that humanity has yet to seize the true potential of the flywheel. When spun up to very high speeds, a flywheel becomes a reservoir for a massive amount of kinetic energy, which can be stored or drawn back out at will. It becomes, in effect, an electromechanical battery.

The capabilities of such a device are as extraordinary as its unique design. A traditional lead-acid cell“ the battery most often used in heavy-duty power applications“ stores energy at a density of 30-40 watt-hours per kilogram: enough to power a 100-watt bulb for about 20 minutes. A flywheel-based battery, on the other hand, can reach energy densities 3-4 times higher, at around 100-130 watt-hours per kilogram. Unlike the battery, the flywheel can also store and discharge all that energy rapidly without being damaged, meaning it can charge up to full capacity within minutes instead of hours and deliver up to one hundred times more power than a conventional battery. What™s more, it™s unaffected by extreme temperatures, boasts an efficiency of 85-95%, and has a lifespan measured in decades rather than years.

While the average person has probably never heard of a flywheel battery, the concept is starting to be taken seriously by commercial and governmental interests. Large corporations see flywheel energy systems as ideal for power backup applications because of their long lifespan and low maintenance. Power companies often use them for load-leveling purposes: maintaining a steady flow of electricity between power generation peaks, or storing surplus energy during low-demand periods to prevent brownouts later on. Applications such as laboratory experiments that require huge amounts of electricity are sometimes powered by a flywheel, which can be gradually charged up over time rather than placing a massive drain on the power grid all at once. And NASA is funneling considerable resources into developing flywheel systems, which they believe could completely replace batteries in space applications. Apart from a marked superiority in energy density and lifespan, flywheels have the unique advantage of providing energy storage and attitude control for a spacecraft or satellite in one easy package. When two flywheels aboard a satellite spin in opposite directions at equal speeds, the satellite will maintain its attitude; when energy is transferred between the wheels to speed one and slow the other, the satellite will rotate.

But it™s closer to the ground that we find perhaps the most exciting potential application for a flywheel power system. With the modern world™s increasing awareness of the economic and environmental drawbacks of oil-powered automobiles, the electric car has taken on an almost mythical status. Despite decades of development, a practical electric automobile seems as far away as ever, and the limitations of current batteries are largely to blame”they™re sorely lacking in power, storage capacity, charge speed, durability, and lifespan. Flywheel energy storage could well be the solution, and we don™t even have to delve into the theoretical to imagine how such a system would work. In an almost forgotten piece of transportation history, the flywheel-driven vehicle was briefly a reality.

The Gyrobus
The Gyrobus was an obscure public transportation vehicle that saw service in Switzerland, Zaire, and Belgium during the 1950s. Electric buses were already common at the time, but they were restricted to traveling along a grid of overhead electric lines. The idea behind the Gyrobus was to free a bus from this prison of wires. Instead of a conventional engine, the bus carried a three-ton rotating steel wheel attached to an unusual electric motor. When the bus was parked at a charging station, the motor would accelerate the flywheel up to around 3000 RPM; then, when it was time to take off, it became a generator, converting the flywheelâ„¢s kinetic energy back into electricity which drove the busâ„¢s wheels. The charging process took between 30 seconds and 3 minutes, and once charged a Gyrobus could travel 3-6 miles at speeds of 30-40 mph.

A host of problems with the design ensured a short life for the Gyrobus experiment. The busâ„¢s flywheel sat on a standard bearing which frequently broke under the strain, and which rapidly drained the wheelâ„¢s energy through friction. The resulting need to recharge the bus every few stops proved to be a significant hassle. Furthermore, the massive wheel made a Gyrobus far heavier than a regular bus, and far less efficient. The Gyrobus was simply more money and trouble than it was worth.

The flaws in the Gyrobus™s design were serious obstacles facing any flywheel-powered vehicle, but almost all of them have since been overcome. The justification for the bus™s massive steel wheel, and all the problems that came with it, was basic physics: the heavier a rotating object is, the more energy it holds. Increasing the object™s rotational speed, which raises its energy exponentially quadratically rather than linearly, is a far more efficient way to add energy. But spinning a steel wheel too much faster would tear it apart. The Gyrobus™ designers were therefore stuck with favoring size over speed, but this is not the case for modern engineers. The solution came in the 1970s, when materials both stronger and lighter than steel began to appear. Today, carbon fiber flywheels exist that can be spun fast enough to hold 20 times more energy than steel wheels of equal mass”and these materials continue to improve. The delicate and energy-draining bearings that hindered the Gyrobus have also been made obsolete. It™s now taken for granted that any flywheel energy system will use magnetic bearings, which levitate the wheel within a vacuum A magnetic bearing
enclosure so that it spins in a nearly friction-free environment. A magnetic bearingFlywheels in a system like this can
glide along for months once theyâ„¢re fully spun up, and under experimental conditions some have spun for up to two years without outside influence. If some friction is present, the wheel can be kept at full charge indefinitely by trickling in just enough energy to overcome it.

With these advancements, it seems that it may at last be time to see the return of the flywheel-powered vehicle. These new machines may bear little resemblance to the Gyrobuses of yesteryear, however. The design that received the most attention in the last decade was the brainchild of Dr. Jack Bitterly, chief engineer for the company US Flywheel Systems. Bitterly had dreamed since the 1970s of building an entirely flywheel-driven car, but it wasn™t until the 1990s that the technology began to approach the necessary sophistication. Like the mechanism in the Gyrobus, Bitterly™s system featured a combination electric motor/generator to add and draw power from the flywheel; but this flywheel was made of computer-molded carbon fiber and spun silently on magnetic bearings at 100,000 RPM. Enclosed in a reinforced vacuum container, the whole contraption weighed less than one hundred pounds and could deliver a steady 20 horsepower, or 50 hp in shorter bursts. Bitterly™s idea was to put 16 of these units into a regular-sized car, which would generate 800 hp and travel 300 miles on a single charge”about the same range as a tank of gasoline, but at a cost of around 5-10 dollars. Despite some interest from major car companies, Bitterly and US Flywheel Systems were unable to secure enough support to get their design off the ground.

A number of obstacles held back development of a practical flywheel car, and they remain to this day. First, magnetic bearings are not yet up to the task demanded by a moving vehicle. Keeping a flywheel spinning in a laboratory or in the weightless vacuum of space is one thing; spinning it within the inertial jungle of a speeding car”contending with swerves, stops, and bumps”is an entirely different matter. The bearings must adjust on-the-fly to the sizable g-forces produced by ordinary driving in order to prevent energy loss and damage from flywheel touchdown. Even in perfect conditions, current magnetic bearings are not without flaws: they are expensive, unreliable, Chrysler's Patriot prototype
and drain excess energy through eddy currents, random electrical flows in the system. Chrysler's Patriot prototypeAnother
problem unique to flywheel designs is the gyroscopic effect, which causes spinning objects to resist changes to their orientation. Obviously this is not a desirable trait when a vehicle is attempting to turn corners.

Finally, safety is a constant concern. A compact flywheel system such as Bitterly™s carries roughly the kinetic energy of a military tank traveling at highway speed, all of which must be released very quickly if the flywheel breaks apart or falls off its axle. Numerous deaths have resulted from just such failures throughout the history of modern flywheel design. This issue ultimately caused the scrapping of the Chrysler Patriot, a hybrid racing vehicle built in the early 1990s. The car featured a 58,000 RPM flywheel as part of its drive system, but the power of the wheel could never be safely and practically contained. The difference between a potentially deadly failure and a harmless disintegration is the strength of a flywheel™s container”but designers must balance strength with mass in order to keep a vehicle™s weight down. The perfect materials and design for such a container have not yet been found.

None of these problems are insurmountable. Magnetic bearings have plenty of potential for improvement and cost reduction: the biggest advance might come from passive magnets made out of superconducting materials, which would eliminate the problems with energy drain and most of the control hardware. The gyroscopic effect, meanwhile, can be largely canceled by mounting the flywheel enclosure on a gimbal or by pairing each flywheel with a counter-rotating partner. And the risk of flywheel failure can be managed; after all, engineers long ago managed to tame gasoline, a far more dangerous energy storage medium that has surrounded us for the last century.

NASA's 41,000 RPM G2 flywheel
As with most technologies, the time needed to develop these solutions is a matter of interest, ingenuity, and money. Frustrated by the lack of available funding for a full-fledged automobile project and implimentation, most flywheel companies, including US Flywheel Systems, have shifted their focus to large-scale business and space project and implimentations. This change could be seen as a setback, but in the end it may simply be a more roundabout route to the same goal: once flywheels are proven in such demanding functions as powering the International Space Station, they will be taken seriously for more everyday tasks as well.

When examined closely, itâ„¢s striking how many of civilizationâ„¢s energy and environmental problems can be traced back to inadequate energy storage. Humans happily rely on storage methods with efficiencies as low as 20%, wasting far more energy than we actually use. Automobiles continue to be a top contributor of pollution because theyâ„¢re driven by a crude and dirty energy medium, and alternative clean energy sources such as wind and solar are restricted by the lack of an effective potterâ„¢s wheel to keep the power flowing during down periods. When civilization first harnessed the power of the wheel, the achievement brought about a new era for humanity. Today the wheel seems poised to bring about another such change, and though the impact this time might not alter civilization as we know it, it may yet prove to be revolutionary.

read more damninterestingthe-mechanical-battery
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
computer science topics
Active In SP
**

Posts: 610
Joined: Jun 2010
#5
23-06-2010, 10:10 PM

to get more idea about Flywheel Energy Storage System (FESS) please read topicideashow-to-flywheel-energy-storage-system-fess
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
midhunraj
Active In SP
**

Posts: 1
Joined: May 2010
#6
02-07-2010, 02:56 PM

pls give me full report of flywheel batteries
Reply
ajinkya.0093
Active In SP
**

Posts: 2
Joined: Jul 2010
#7
14-07-2010, 11:04 PM

i m student diploma engineering of last year i wanna full info abt this project and implimentation from construction till it's running position related project and implimentation point of view....
if you hav better other sub (option ) for me then u can suggest... it's very argent for me so try to giv most expected feedback from yor.....
Reply
sudhee
Active In SP
**

Posts: 1
Joined: Jul 2010
#8
16-07-2010, 09:40 PM

pleas send me full seminar and presentation ppt report on Flywheel Batteries
help me with my seminar and presentation
Reply
prnc
Active In SP
**

Posts: 2
Joined: Aug 2010
#9
02-08-2010, 10:42 PM

please send me the full seminar and presentation report on Flywheel Batteries
prakashrnc2007@gmail.com
Reply
alok panigrahi
Active In SP
**

Posts: 7
Joined: Jul 2010
#10
04-08-2010, 12:33 PM

nice report.but can i get a power point presentation of this.i ll advanse that.my id is talk2alok31@gmail.com
Reply
mukesh ranjan behera
Active In SP
**

Posts: 1
Joined: Oct 2010
#11
03-10-2010, 03:58 PM

cgdfhbb cf
Reply
seminarsonly
Active In SP
**

Posts: 126
Joined: Sep 2010
#12
03-10-2010, 10:44 PM

Hi,
visit this page for flywheel batteries ppt:
scribddoc/11860972/NASA-Flywheel-Battery-Project-Final
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
g.swetha
Active In SP
**

Posts: 1
Joined: Dec 2010
#13
22-12-2010, 06:37 PM

need more information and description with examples?
Reply
seminar surveyer
Active In SP
**

Posts: 3,541
Joined: Sep 2010
#14
23-12-2010, 10:03 AM

please go through the given links. download the given attachments - it is free here
Reply
seminar paper
Active In SP
**

Posts: 6,455
Joined: Feb 2012
#15
15-03-2012, 10:31 AM

to get information about the topic "flywheel batteries" full report ppt and related topic refer the link bellow

topicideashow-to-flywheel-batteries

topicideashow-to-flywheel-batteries?page=2
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  load equalization using flywheel jaseelati 0 214 13-02-2015, 01:44 PM
Last Post: jaseelati
  dual mass flywheel wiki jaseelati 0 257 06-02-2015, 04:48 PM
Last Post: jaseelati
  How do Fuel Cells Compare to Internal Combustion Engines and Batteries? seminar projects maker 0 503 14-09-2013, 04:18 PM
Last Post: seminar projects maker
  Report on Flywheel energy storage (FES) study tips 0 519 09-05-2013, 04:06 PM
Last Post: study tips
  Aerospace Flywheel Development Report study tips 0 411 14-02-2013, 12:27 PM
Last Post: study tips
  FLYWHEEL REPORT project girl 0 600 28-12-2012, 01:41 PM
Last Post: project girl
  Nanowire Lithium-Ion Batteries as Electrochemical Energy Storage for Electric Vehicle project girl 0 416 27-12-2012, 01:52 PM
Last Post: project girl
  Flywheel energy and power storage systems pdf project girl 0 412 26-12-2012, 02:12 PM
Last Post: project girl
  A Flywheel Energy Storage System with Active Magnetic Bearings seminar tips 0 407 04-12-2012, 05:04 PM
Last Post: seminar tips
  Flywheel energy storage full report seminar tips 0 489 20-11-2012, 05:57 PM
Last Post: seminar tips