GSM based SCADA implementation using Microcontroller
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
project report tiger
Active In SP
**

Posts: 1,062
Joined: Feb 2010
#1
08-02-2010, 11:33 AM



.doc   GSM based SCADA implementation.doc (Size: 109.5 KB / Downloads: 830)
GSM based SCADA implementation using Microcontroller
The purpose of this project and implimentation is to acquire the remote electrical parameters like Voltage, Current and Frequency and send these real time values over GSM network using GSM Modem/phone. This project and implimentation is also designed to protect the electrical circuitry by operating an Electromagnetic Relay. This Relay gets activated whenever the electrical parameters exceed the predefined values. The Relay can be used to operate a Circuit Breaker to switch off the main electrical supply.
User can send commands in the form of SMS messages to read the remote electrical parameters. This system also can automatically send the real time electrical parameters periodically (based on time settings) in the form of SMS. This also can be designed to send SMS alerts whenever the Circuit Breaker trips or whenever the Voltage or Current exceeds the predefined limits.
This project and implimentation makes use of an onboard computer which is commonly termed as micro controller. This onboard computer can efficiently communicate with the different sensors being used. The controller is provided with some internal memory to hold the code. This memory is used to dump some set of assembly instructions into the controller. And the functioning of the controller is dependent on these assembly instructions.

The objectives of the project and implimentation include:
1. Sensing different electrical parameters (voltage, current, temperature).
2. Display those parameters.
3. Forwarding the electrical parameters over GSM network.
4. Producing buzzer alerts (if necessary).
5. Controlling the electrical appliances.
The project and implimentation provides us exposure on:
1. Initialization of ADC module of microcontroller.
2. Embedded C program.
3. PCB designing.
4. Different electrical sensors.
5. Interfacing sensors to controller.
6. LCD interfacing.
The major building blocks of this project and implimentation are:
1. Microcontroller Mother Board with regulated power supply.
2. LCD display to show the measured electrical parameters.
3. Electromagnetic Relay to control Electrical Appliances.
4. Temperature Sensor.
5. Voltage Sensor.
6. Current Sensor.
7. GSM Modem/phone for remote communication.
Block Diagram:
Reply
tus707
Active In SP
**

Posts: 5
Joined: Jan 2010
#2
18-02-2010, 01:38 PM

plzz provide more information like block diagram circuit n abt other parts of the system...
Reply
seminar presentation
Active In SP
**

Posts: 582
Joined: Apr 2010
#3
16-05-2010, 11:59 AM


.ppt   GSM based SCADA implementation using Microcontroller.ppt (Size: 350.5 KB / Downloads: 602)

GSM Based SCADA Implementation Using Microcontroller




INTRODUCTION

The purpose of this project and implimentation is to acquire the remote electrical parameters like Voltage, Current and Frequency and send these real time values over GSM network using GSM Modem/phone



The major building blocks of this project and implimentation are:

Microcontroller Mother Board with regulated power supply.
LCD display to show the measured electrical parameters.
Electromagnetic Relay to control Electrical Appliances.
Temperature Sensor.
Voltage Sensor.
Current Sensor.
GSM Modem/phone for remote communication.



WHAT IS SCADA ?

SCADA - stands for SUPERVISORY CONTROL AND DATA AQUISATION





GSM Modem

WHAT IS MICROCONTROLLER?
MICROCONTROLLER
COMPONENTS BUILT INSIDE THE MICROCONTOLLER ARE:
ELECTRICAL PARAMETERS
Voltage
Current
Frequency
MEASUREMENT OF ELECTRICAL PARAMETERS
REGULATED POWER SUPPLY
CONCEPT OF POWER SUPPLYING TO THE SYSTEM



ADVANTAGES

Get energy parameters on your
Mobile Phone/Laptop
Remote Switching from Mobile Phone
Remote monitoring of voltage, current and frequency.

THANK U
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
anushapillai
Active In SP
**

Posts: 1
Joined: Jul 2010
#4
08-08-2010, 12:12 PM

hey please could you mail me all the details regd. thie project and implimentation.
like ckt diag and all.... please... thnx...
my email id is beproj2011@gmail.com
thnx a tonne....
tc..
Reply
pavan.3696
Active In SP
**

Posts: 1
Joined: Aug 2010
#5
30-08-2010, 04:04 PM

hi
what are the circuits of the voltage and current sensing
Reply
projectsofme
Active In SP
**

Posts: 1,124
Joined: Jun 2010
#6
24-09-2010, 05:26 PM

Are you looking for the power point presentation of GSM based SCADA implementation using Microcontroller?here it is.......


Attached Files
.ppt   GSM based SCADA implementation.ppt (Size: 685 KB / Downloads: 164)
Reply
tototo
Active In SP
**

Posts: 2
Joined: Dec 2010
#7
05-12-2010, 05:11 PM

can u please email me the details on circuit diagram and the microcontroller code
Reply
seminar surveyer
Active In SP
**

Posts: 3,541
Joined: Sep 2010
#8
06-12-2010, 09:58 AM

hi
this thread contains word document and ppt. please download them for more details
Reply
seminar surveyer
Active In SP
**

Posts: 3,541
Joined: Sep 2010
#9
03-01-2011, 12:16 PM




.ppt   GSM based SCADA implementation.ppt (Size: 685 KB / Downloads: 180)


Introduction
The purpose of this project and implimentation is to acquire the remote electrical parameters like Voltage, Current and Frequency and send these real time values over GSM network using GSM Modem/phone.
This project and implimentation is also designed to protect the electrical circuitry by operating an Electromagnetic Relay.  This Relay gets activated whenever the electrical parameters exceed the predefined values.  The Relay can be used to operate a Circuit Breaker to switch off the main electrical supply.


Features
Sensing different electrical parameters (voltage, current, temperature).
Display those parameters.
Forwarding the electrical parameters over GSM network.
Producing buzzer alerts (if necessary).
Controlling the electrical appliances.


The major building blocks of this project and implimentation
Regulated power supply with voltage regulator.
Microcontroller.
GSM modem
GLCD.
Relay.


Microcontroller
A microcontroller is a small computer on a single integrated circuit consisting of a relatively simple CPU combined with support functions such as a crystal oscillator, timers, watchdog timer, serial and analog I/O etc.

Microcontrollers are also used in scientific, high technology, and aerospace project and implimentations.

Microcontrollers are designed for small or dedicated applications.

Some microcontrollers may operate at clock rate frequencies as low as 4 kHz, as this is adequate for many typical applications, enabling low power consumption (mill watts or microwatts)

Microcontrollers are used in automatically controlled products and devices, such as automobile engine control systems, remote controls, office machines, appliances, power tools, and toys. By reducing the size and cost compared to a design that uses a separate microprocessor, memory, and input/output devices, microcontrollers make it economical to digitally control even more devices and processes.

A microcontroller can be considered a self-contained system with a processor, memory and peripherals and can be used with an embedded system.
Microcontroller
A microcontroller is a small computer on a single integrated circuit consisting of a relatively simple CPU combined with support functions such as a crystal oscillator, timers, watchdog timer, serial and analog I/O etc.

Microcontrollers are also used in scientific, high technology, and aerospace project and implimentations.

Microcontrollers are designed for small or dedicated applications.

Some microcontrollers may operate at clock rate frequencies as low as 4 kHz, as this is adequate for many typical applications, enabling low power consumption (mill watts or microwatts)

Microcontrollers are used in automatically controlled products and devices, such as automobile engine control systems, remote controls, office machines, appliances, power tools, and toys. By reducing the size and cost compared to a design that uses a separate microprocessor, memory, and input/output devices, microcontrollers make it economical to digitally control even more devices and processes.

A microcontroller can be considered a self-contained system with a processor, memory and peripherals and can be used with an embedded system.

Microcontrollers must provide real time response to events in the embedded system they are controlling. When certain events occur, an interrupt system can signal the processor to suspend processing the current instruction sequence and to begin an interrupt service routine (ISR, or "interrupt handler").

Embedded processors are usually used to control devices, they sometimes need to accept input from the device they are controlling. This is the purpose of the analog to digital converter. Since processors are built to interpret and process digital data, i.e. 1s and 0s, they won't be able to do anything with the analog signals that may be being sent to it by a device.

So the analog to digital converter is used to convert the incoming data into a form that the processor can recognize. There is also a digital to analog converter that allows the processor to send data to the device it is controlling.

PIC is a family of Harvard architecture microcontrollers made by Microchip Technology, derived from the PIC1640 originally developed by General Instrument's Microelectronics Division. The name PIC initially referred to "Peripheral Interface Controller".

A PIC's instructions vary from about 35 instructions for the low-end PICs to over 80 instructions for the high-end PICs. The instruction set includes instructions to perform a variety of operations on registers directly, the accumulator and a literal constant or the accumulator and a register, as well as for conditional execution, and program branching.




Reply
akmo
Active In SP
**

Posts: 3
Joined: Jan 2011
#10
30-01-2011, 10:54 AM

Can u please send me the circuit diagrams for the project and implimentation...
at-fastrack004@gmail.com
Reply
seminar class
Active In SP
**

Posts: 5,361
Joined: Feb 2011
#11
08-03-2011, 11:41 AM

ABSTRACT
In this project and implimentation we have studied about an integrated wireless SCADA system for monitoring & accessing the performance of remotely situated device parameter such as temperature, pressure, humidity on real time basis. For this we have used the infrastructure of the existing mobile network, which is based on GSM technique Supervisory Control and Data Acquisition (SCADA) is a field of constant development and research. This project and implimentation investigates on creating an extremely low cost device which can be adapted to many different SCADA applications via some very basic programming, and plugging in the relevant peripherals. Much of the price in some expensive SCADA applications is a result of using specialized communication infrastructure. The application of infrastructure, in the proposed scheme the cost will come down. Additionally the generic nature of the device will be assured.
Wireless SCADA deals with the creation of an inexpensive, yet adaptable and easy to use SCADA device and infrastructure using the mobile telephone network, in particular, the Global System for Mobile communication (GSM). The hardware components making up the device are relatively unsophisticated, yet the custom written software makes it re-programmable over the air, and able to provide a given SCADA application with the ability to send and receive control and data signals at any non predetermined time. GSM is a global system for mobile communication service that enables “always on” connections, eliminating repetitive and time-consuming dial-up connections. From the wireless SCADA system which is proposed in setup the temperature of around 30oC could be sufficiently recorded from remote location.
Reply
padmaharini
Active In SP
**

Posts: 3
Joined: Mar 2011
#12
11-03-2011, 09:24 PM

documentation for above topic
Reply
ngnitikag@gmail.com
Active In SP
**

Posts: 1
Joined: Mar 2011
#13
15-03-2011, 03:48 PM

will u plz send me the detailed project and implimentation report for GSM BASED SCADA IMPLEMENTATION USING MICROCONTROLLER......
i need it plz...reply soon
Reply
kiran.arsenal
Active In SP
**

Posts: 2
Joined: Feb 2011
#14
06-05-2011, 10:25 AM

get me the details of that project and implimentation soon
Reply
jeevanarao.1006
Active In SP
**

Posts: 1
Joined: Jan 2012
#15
13-01-2012, 11:25 AM

i want full details about gsm based scada system
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  IMPLEMENTATION OF ADVANCED ENCRYPTION STANDARD (AES) computer science crazy 7 4,779 27-05-2016, 09:18 AM
Last Post: Dhanabhagya
  AUTOMATIC STREET LIGHT CONTROLLER USING AT89c51 MICROCONTROLLER seminar flower 3 2,243 05-11-2015, 10:42 PM
Last Post: Guest
  WEATHER MONITORING AND INSTRUMENT CONTROL SYSTEM USING MICROCONTROLLER project report tiger 6 7,070 04-10-2014, 08:55 PM
Last Post: OsKFAHX
  MICROCONTROLLER BASED DAM GATE CONTROL SYSTEM full report seminar class 13 10,280 13-07-2014, 11:33 PM
Last Post: Guest
  DOOR LOCKING SECURITY SYSTEM UING GSM FULL REPORT seminar class 11 10,794 14-06-2014, 08:07 PM
Last Post: lagua2012
  REMOTE NOTICE BOARD IMPLEMENTATION USING GSM COMMUNICATION project uploader 2 1,254 09-05-2014, 10:00 AM
Last Post: seminar project topic
  PIC Microcontroller Based Wireless Temperature and Heart Beat Read-Out project uploader 5 2,731 14-04-2014, 10:20 AM
Last Post: seminar project topic
  Body temperature and ECG monitoring using an SMS based telemedicine system ppt seminar flower 5 2,596 10-04-2014, 09:49 AM
Last Post: seminar project topic
  DEVELOPMENT OF SOFTWARE & HARDWARE FOR MICROCONTROLLER BASED SMART NOTICE BOARD (US Electrical Fan 4 4,172 21-12-2013, 05:39 PM
Last Post: kumar.yeshwanth46@gmail.com
  microcontroller based project and implimentations list for final year computer science crazy 2 9,013 15-11-2013, 05:23 PM
Last Post: Guest