HEAT TRANSFER PERFORMANCE IN 3D INDUCED FINNED HEAT PIPE
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
projectsofme
Active In SP
**

Posts: 1,124
Joined: Jun 2010
#1
27-11-2010, 09:52 AM



.ppt   HEAT TRANSFER PERFORMANCE IN 3D INDUCED FINNED HEAT PIPE.ppt (Size: 284.5 KB / Downloads: 194)
Presented by:
A.JohnBritto
C.Kanaga Raj
P.Senna Kesavan
A.Vinoth
HEAT TRANSFER PERFORMANCE IN 3D INDUCED FINNED HEAT PIPE


ABSTRACT
3D induced finned steel-water heat pipe is carried out in this project and implimentation.

All the main parameters that can significantly influence the heat transfer performance of heat pipe ,such as working temperature, heat flux, inclination angle, working fluid fill ratio (defined by the evaporation volume), have been examined.


The evaporation and condensation heat transfer coefficients in 3D induced finned
heat pipe are found to be increased, as compared to the smooth gravity-assisted heat pipe under the same conditions.

Therefore, it is concluded that the special structures of 3D-fins on the inner wall can significantly reduce the internal thermal resistance of heat pipe and then greatly enhance its heat transfer performance.


Nomenclature

Le length of evaporation section of heat pipe, m


La length of adiabatic section of heat pipe, m


Lc length of condensation section of heat pipe, m


APPLICATION’S


Power Plants
Aero Space
Chemical Industries
Hydraulic Couplings





Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  THREE ROLLER PIPE BENDING MACHINE seminar tips 1 1,756 04-10-2013, 01:48 PM
Last Post: Guest
  DEVELOPMENT OF AN AC SYSTEM USING WASTE HEAT OF AN IC ENGINE full report project report tiger 18 21,629 16-08-2013, 09:29 AM
Last Post: study tips
  Performance, emission and combustion characteristics of a DI diesel engine pdf study tips 0 596 06-08-2013, 03:52 PM
Last Post: study tips
  AUTOMATIC ENERGY SAVING SYSTEM WITH HUMAN HEAT DETECTION smart paper boy 13 8,696 01-08-2013, 07:36 PM
Last Post: Monika Tarwala
  EXHAUST GAS HEAT RECOVERY POWER GENERATION SYSTEM REPORT study tips 0 1,091 03-07-2013, 03:19 PM
Last Post: study tips
  An Experimental Study on Clothes Drying Using Waste Heat from Split Type study tips 0 680 09-02-2013, 03:23 PM
Last Post: study tips
  Thermoelectric Power Generation Using Waste-Heat Energy as an Alternative Green project girl 0 921 04-02-2013, 11:32 AM
Last Post: project girl
  SHAFT COUPLING AND PIPE JOINTS seminar tips 0 733 25-01-2013, 02:13 PM
Last Post: seminar tips
  EXPERIMENTAL INVESTIGATION ON HEAT RECOVERY FROM DIESEL ENGINE EXHAUST USING THERMAL project girl 0 623 18-01-2013, 04:34 PM
Last Post: project girl
  Automatic Energy Saving System With Human Heat Detection project uploader 1 961 17-01-2013, 10:16 AM
Last Post: seminar tips