Image enhancement and edge detection
computer science technology Active In SP Posts: 740 Joined: Jan 2010 
29012010, 08:14 PM
Image enhancement and edge detection.docx (Size: 13.62 KB / Downloads: 163) INTRODUCTION Image enhancement and edge detection are well known digital image signal processing applications that may require twodimensional (2D) filterlike computational solutions. These applications usually depend on computation intensive code sections, consisting of the repetition of sequences of operations. They are also characterized by the multidimensionality of the data involved. An effective technique in improving the computing performance of such applications has been the design and use of Application Specific Integrated Circuits (ASICs). This paper presents a new technique applicable to the design of a 2D filter system using multiple parallel processors. A multidimensional retiming algorithm embedded in this new technique provides the fully parallel utilization of the available processors, thus reducing the overall execution time of the filter function. Parallel architectures are an important tool in ASIC design. However, these architectures require a careful partitioning of the problem in order to improve the utilization of the parallel processors During the circuit design phase, nested loop structures can be coded using hardware description languages, such as VHDL constructs, in order to reduce the design time. However, in VHDL, the loop control indices will represent the number of times a section of the circuit will be replicated in the final synthesis under the assumption that there are no physical or cost constraints in the circuit implementation . In this paper, a multidimensional retiming technique is used to transform the loop in such a way to produce the parallel solution for the problem for a given number of processing units. Such a solution can then be implemented on a standard multiprocessor architecture. Retiming was originally proposed by Leiserson  Saxe, focusing on improving the cycle time of onedimensional problems [13]. Most work done in this area, is subject to limitations imposed by the number of delays (memory elements) existing in a cycle of a data flow graph representing the problem [3, 6, 10, 11, 12, 16, 22, 25]. Other methods focus on multiprocessor scheduling and are also applicable to onedimensional problems [7, 8, 14, 16, 18]. This study focuses on the parallelism inherent to multiimensional applications, ignored by the onedimensional methods. Retiming and other loop transformations have since been applied in areas such as scheduling and parallel processing, with the main goal of exploiting finegrain parallelism in the loop body [4, 15]. Due to the different focus in obtaining parallelism, those techniques are not aimed to improve the execution of parallel iterations in multiprocessor systems. Research by Passos and Sha extended the retiming concept to multidimensional (MD) applications [19]. The multidimensional retiming concept is used in this paper to model the partitioning of the loop among the available processors. Multidimensional retiming brings some advantages to the process, since it is readily applicable to the multidimensional fields considered, eliminating the need for a loop transformation that converts the original problem to one dimension. Another significant advantage of MD retiming is that there are no restrictions on its applicability, not being constrained by the characteristics of the onedimensional methods Design of 2D Filters using a Parallel Processor Architecture Twodimensional filters are usually part of the implementation of digital image processing applications. These filters process recursive sets of instructions and require high computational speed. Optimized implementations of these filters depend on the use of Application Specific Integrated Circuits (ASICs). A system with multiple parallel processing units is a feasible design option able to achieve the required computational performance. In this paper, a loop transformation algorithm, which allows the efficient utilization of a parallel multiprocessor system, is presented. Uniform nested loops representing the image filters and the available processors are modeled as multidimensional data flow graphs. A new loop structure is generated so that an arbitrary number of processors available in the system can run in parallel. INTRODUCTION Image enhancement and edge detection are well known digital image signal processing applications that may require twodimensional (2D) filterlike computational solutions. These applications usually depend on computation intensive code sections, consisting of the repetition of sequences of operations. They are also characterized by the multidimensionality of the data involved. An effective technique in improving the computing performance of such applications has been the design and use of Application Specific Integrated Circuits (ASICs). This paper presents a new technique applicable to the design of a 2D filter system using multiple parallel processors. A multidimensional retiming algorithm embedded in this new technique provides the fully parallel utilization of the available processors, thus reducing the overall execution time of the filter function. Parallel architectures are an important tool in ASIC design. However, these architectures require a careful partitioning of the problem in order to improve the utilization of the parallel processors [2, 17, 24]. During the circuit design phase, nested loop structures can be coded using hardware description languages, such as VHDL constructs, in order to reduce the design time. However, in VHDL, the loop control indices will represent the number of times a section of the circuit will be replicated in the final synthesis under the assumption that there are no physical or cost constraints in the circuit implementation. In this paper, a multidimensional retiming technique is used to transform the loop in such a way to produce the parallel solution for the problem for a given number of processing units. Such a solution can then be implemented on a standard multiprocessor architecture. Retiming was originally proposed by Leiserson  Saxe, focusing on improving the cycle time of onedimensional problems [13]. Most work done in this area, is subject to limitations imposed by the number of delays (memory elements) existing in a cycle of a data flow graph representing the problem [3, 6, 10, 11, 12, 16, 22, 25]. Other methods focus on multiprocessor scheduling and are also applicable to onedimensional problems [7, 8, 14, 16, 18]. This study focuses on the parallelism inherent to multidimensional applications, ignored by the onedimensional methods. Retiming and other loop transformations have since been applied in areas such as scheduling and parallel processing, with the main goal of exploiting finegrain parallelism in the loop body [4, 15]. Due to the different focus in obtaining parallelism, those techniques are not aimed to improve the execution of parallel iterations in multiprocessor systems. Research by Passos and Sha extended the retiming concept to multidimensional (MD) applications [19]. The multidimensional retiming concept is used in this paper to model the partitioning of the loop among the available processors. Multidimensional retiming brings some advantages to the process, since it is readily applicable to the multidimensional fields considered, eliminating the need for a loop transformation that converts the original problem to one dimension. Another significant advantage of MD retiming is that there are no restrictions on its applicability, not being constrained by the characteristics of the onedimensional methods. Twodimensional filters are usually part of the implementation of digital image processing applications. These filters process recursive sets of instructions and require high computational speed. Optimized implementations of these filters depend on the use of Application Specific Integrated Circuits (ASICs). A system with multiple parallel processing units is a feasible design option able to achieve the required computational performance. In this paper, a loop transformation algorithm, which allows the efficient utilization of a parallel multiprocessor system, is presented. Uniform nested loops representing the image filters and the available processors are modeled as multidimensional data flow graphs. A new loop structure is generated so that an arbitrary number of processors available in the system can run in parallel. Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion



