Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
electronics seminars
Active In SP

Posts: 694
Joined: Nov 2009
13-12-2009, 04:33 PM

KEY CONTROLLED- FORK LIFTER: - This Fork lifter lift the floor items and
place at the required space as instructed by Key controls.
Use Search at wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Active In SP

Posts: 1
Joined: Oct 2010
11-10-2010, 06:52 PM

how to make key controlled fork lifter.what all materials r to b used?wt is d principle used in it?
Active In SP

Posts: 1
Joined: Oct 2010
12-10-2010, 05:58 PM

i am serching for the same ........miss
project report helper
Active In SP

Posts: 2,270
Joined: Sep 2010
20-10-2010, 04:08 PM

.doc   REVIEW ON TOPIC.doc (Size: 2.04 MB / Downloads: 92)

Name: Vikrant Behal
Class: B-tech(hons.) ME + MBA
Sec: A4006
Roll No.: RA4006A25
Ms. Gouri Trehan

In general the forklift can be defined as a tool capable of lifting hundreds of kilograms. A forklift is a vehicle similar to a small truck that has two metal forks on the front used to lift cargo. The forklift operator drives the forklift forward until the forks push under the cargo, and can then lift the cargo several feet in the air by operating the forks. The forks, also known as blades or tines, are usually made out of steel and can lift up to a few tons.
Forklifts are either powered by gasoline, propane, or electricity. Electric forklifts relay on batteries to operate. Gasoline or propane forklifts are sometimes stronger or faster than electric forklifts, but they are more difficult to maintain, and fuel can be costly. Electric forklifts are great for warehouse use because they do not give off noxious fumes like gas powered machines do.
Forklifts are most often used in warehouses, but some are meant to be used outdoors. The vast majority of rough terrain forklifts operate on gasoline, but some use diesel or natural gas. Rough terrain forklifts have the highest lifting capacity of all forklifts and heavy duty tires (like those found on trucks), making it possible to drive them on uneven surfaces outdoors.
It is important for forklift operators to follow all safety precautions when using a forklift. Drivers should be careful not to exceed the forklift's weight capacity. Forklift operators also need to be able to handle forklift's rear wheel steering. Driving a forklift is similar to driving a car in reverse, meaning that the driver must constantly steer to keep it moving in a straight line. The driver must be aware of the forklift's ever-changing center of gravity and avoid making any quick sharp turns or going too fast. It is advisable that anyone who operates a forklift be fully trained and licensed.
Forklifts have revolutionized warehouse work. They made it possible for one person to move thousands of pounds at once. Well-maintained and safely operated forklifts make lifting and transporting cargo infinitely easier. This is the general description of a normal forklift truck. To enhances the technology further, this prototype module is constructed with remote technology, there by the operator can walk along with the forklift for better visibility & the container can be placed accurately (precision position). This increases the safety of the operator.

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  REMOTE CONTROLLED HOVERCRAFT seminar poster 0 774 29-10-2013, 04:31 PM
Last Post: seminar poster
  BRAIN CONTROLLED CAR FOR DISABLED project report helper 5 9,971 10-09-2013, 12:02 PM
Last Post: Guest
Last Post: study tips
  Splitting up the compressed air network and using a frequency controlled compressor study tips 0 452 19-02-2013, 09:40 AM
Last Post: study tips
  Design of Plastic Injection Mold for Producing Key Ring and Optimization project girl 0 512 18-12-2012, 12:13 PM
Last Post: project girl
  Pneumatic, PLC Controlled, Automotive Gear Shifting Mechanism seminar ideas 0 1,486 24-04-2012, 03:25 PM
Last Post: seminar ideas
  HAND CONTROLLED REAR BRAKES IN TWO WHEELERS smart paper boy 0 1,727 05-08-2011, 09:43 AM
Last Post: smart paper boy
  Computer-controlled testing machine project topics 0 662 26-04-2011, 03:06 PM
Last Post: project topics
  Automotive electronics-Smart key system seminar class 0 1,131 06-04-2011, 12:14 PM
Last Post: seminar class
  Remote controlled scrap collecting vehicle ajukrishnan 2 4,842 08-02-2011, 07:18 AM
Last Post: mohanruthere