LED wireless
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator

Posts: 3,048
Joined: Dec 2008
21-09-2008, 11:04 AM

Billions of visible LEDs are produced each year, and the emergence of high brightness AlGaAs and AlInGaP devices has given rise to many new markets. The surprising growth of activity in, relatively old, LED technology has been spurred by the introduction of AlInGaP devices. Recently developed AlGaInN materials have led to the improvements in the performance of bluish-green LEDs, which have luminous efficacy peaks much higher than those for incandescent lamps. This advancement has led to the production of large-area full-color outdoors LED displays with diverse industrial applications.

The novel idea of this article is to modulate light waves from visible LEDs for communication purposes. This concurrent use of visible LEDs for simultaneous signaling and communication, called iLight, leads to many new and interesting applications and is based on the idea of fast switching of LEDs and the modulation visible-light waves for free-space communications. The feasibility of such approach has been examined and hardware has been implemented with experimental results. The implementation of an optical link has been carried out using an LED traffic-signal head as a transmitter. The LED traffic light (fig 1 below) can be used for either audio or data transmission.
Audio messages can be sent using the LED transmitter, and the receiver located at a distance around 20 m away can play back the messages with the speaker. Another prototype that resembles a circular speed-limit sign with a 2-ft diameter was built. The audio signal can be received in open air over a distance of 59.3 m or 194.5 ft. For data transmission, digital data can be sent using the same LED transmitter, and the experiments were setup to send a speed limit or location ID information.

The work reported in this article differs from the use of infrared (IR) radiation as a medium for short-range wireless communications. Currently, IR links and local-area networks available. IR transceivers for use as IR data links are widely available in the markets. Some systems are comprised of IR transmitters that convey speech messages to small receivers carried by persons with severe visual impairments. The Talking Signs system is one such IR remote signage system developed at the Smith-Kettlewell Rehabilitation Engineering Research center. It can provide a repeating, directionally selective voice message that originates at a sign. However, there has been very little work on the use of visible light as a communication medium.

The availability of high brightness LEDs make the visible-light medium even more feasible for communications. All products with visible-LED components (like an LED traffic signal head) can be turned into an information beacon. This iLight technology has many characteristics that are different from IR. The iLight transceivers make use of the direct line-of-sight (LOS) property of visible light, which is ideal in applications for providing directional guidance to persons with visual impairments. On the other hand, IR has the property of bouncing back and forth in a confined environment. Another advantage of iLight is that the transmitter provides easy targets for LOS reception by the receiver. This is because the LEDs, being on at all times, are also indicators of the location of the transmitter. A user searching for information has only to look for lights from an iLight transmitter. Very often, the device is concurrently used for illumination, display, or visual signage. Hence, there is no need to implement an additional transmitter for information broadcasting. Compared with an IR transmitter, an iLight transmitter has to be concerned with even brightness. There should be no apparent difference to a user on the visible light that emits from an iLight device.

It has long been realized that visible light has the potential to be modulated and used as a communication channel with entropy. The application has to make use of the directional nature of the communication medium because the receiver requires a LOS to the audio system or transmitter. The locations of the audio signal broadcasting system and the receiver are relatively stationary. Since the relative speed between the receiver and the source are much less than the speed of light, the Doppler frequency shift observed by the receiver can be safely neglected. The transmitter can broadcast with viewing angle close to 180 . The frequency of an ON period followed by an OFF period to transmit information is short enough to be humanly unperceivable; so that it does not affect traffic control. This article aims to present an application of high-brightness visible LEDs for establishing optical free-space links.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Active In SP

Posts: 4
Joined: Jun 2011
25-11-2011, 02:38 PM

I need the seminar and presentation report and powerpoint presentation of this topic LED WIRELESS..
seminar addict
Super Moderator

Posts: 6,592
Joined: Jul 2011
26-11-2011, 09:45 AM

to get information about the topic Wireless LED full report, ppt and related topic refer the link bellow

Active In SP

Posts: 1
Joined: Mar 2012
14-03-2012, 12:12 PM

plz send me full report on led wireless(not in pdf file)
seminar flower
Super Moderator

Posts: 10,120
Joined: Apr 2012
23-05-2012, 05:08 PM

LED wireless Technology

.ppt   LED.ppt (Size: 567 KB / Downloads: 58)


This advancement as led to the production of large-area full-color outdoors LED displays with divers industrial applications.
The novel idea of this article is to modulate light waves from visible LEDs for communication purposes.


The photo detector circuit consists of a photo diode and a resistor. One end of the photo diode is coupled to the current limiting resistor with the other end coupled to the ground.
Since the signal from the photo-detector circuit is very small, amplification is needed for the next stage.


A voltage-controlled oscillator or VCO is an electronic oscillator designed to be controlled in oscillation frequency by a voltage input
This circuit aims to amplify the input voltage to a certain level, and a comparator is used to produce rectangular signal pulses.


A preamplifier is an electronic amplifier that prepares a small electrical signal for further amplification or processing.
Two pre-amplifiers are used in this circuit because using one pre-amplifier will require a very high gain amplifier. Hence, two pre-amplifiers, each with lower gain,are used toachieve high gain with reduced noise.


band-pass filter is a device that passes frequencies within a certain range and rejects frequencies outside that range. Optical band-pass filters are of common usage.
A The output signal from the previous stage, integrator and envelope detector has many distortions. A band-pass filter is used to filter out all the high-frequency distortions.

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  head movement based voice enabled wireless device switching for physically challenged jaseelati 0 210 05-02-2015, 02:23 PM
Last Post: jaseelati
  border security using wireless integrated network sensors ppt jaseelati 0 226 05-02-2015, 01:54 PM
Last Post: jaseelati
  detection and localization of multiple spoofing attackers in wireless networks ppt jaseelati 0 279 17-01-2015, 02:52 PM
Last Post: jaseelati
  Propeller Clock" Mechanically Scanned LED Clock seminar projects maker 0 322 26-09-2013, 03:50 PM
Last Post: seminar projects maker
  DEFENDING WIRELESS NETWORKS FROM RADIO INTERFERENCE ATTACKS pdf seminar projects maker 0 432 25-09-2013, 02:12 PM
Last Post: seminar projects maker
  Guided Transmission and Unguided Wireless Transmission pdf study tips 0 399 10-09-2013, 03:24 PM
Last Post: study tips
  Prototype of 5.8 GHz Wireless Power Transmission System for Electric Vehicle pdf study tips 0 497 10-09-2013, 02:39 PM
Last Post: study tips
  Wireless sensor networks… And zigbee PPT study tips 0 569 10-09-2013, 02:01 PM
Last Post: study tips
  REPORT ON WIRELESS FIDELITY study tips 0 393 27-08-2013, 12:53 PM
Last Post: study tips
  Li-Fi (Light Fidelity)-The future technology In Wireless communication pdf study tips 0 1,974 02-07-2013, 03:17 PM
Last Post: study tips