Light Tree
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator
******

Posts: 3,048
Joined: Dec 2008
#1
23-09-2008, 12:53 AM


Definition
The concept of light tree is introduced in a wavelength routed optical network, which employs wavelength -division multiplexing (WDM).
Depending on the underlying physical topology networks can be classified into three generations:

a).First Generation: these networks do not employ fiber optic technology; instead they employ copper-based or microwave technology. E.g. Ethernet.
b).Second Generation: these networks use optical fibers for data transmission but switching is performed in electronic domain. E.g. FDDI.
c).Third Generation: in these networks both data transmission and switching is performed in optical domain. E.g. WDM.

WDM wide area networks employ tunable lasers and filters at access nodes and optical/electronic switches at routing nodes. An access node may transmit signals on different wavelengths, which are coupled into the fiber using wavelength multiplexers. An optical signal passing through an optical wavelength-routing switch (WRS) may be routed from an output fiber without undergoing opto-electronic conversion.

A light path is an all-optical channel, which may be used to carry circuit switched traffic, and it may span multiple fiber links. Assigning a particular wavelength to it sets these up. In the absence of wavelength converters, a light path would occupy the same wavelength continuity constraint.

A light path can create logical (or virtual) neighbors out of nodes that may be geographically far apart from each other. A light path carries not only the direct traffic between the nodes it interconnects, but also the traffic from nodes upstream of the source to nodes upstream of the destination. A major objective of light path communication is to reduce the number of hops a packet has to traverse.

Under light path communication, the network employs an equal number of transmitters and receivers because each light path operates on a point-to-point basis. However this approach is not able to fully utilize all of the wavelengths on all of the fiber links in the network, also it is not able to fully exploit all the switching capability of each WRS.
A light tree is a point to point multipoint all optical channel, which may span multiple fiber links. Hence, a light tree enables single-hop communication between a source node and a set of destination nodes. Thus, a light tree based virtual topology can significantly reduce the hop distance, thereby increasing the network throughput.



Requirements:
1. Multicast -capable wavelength routing switches (MWRS) at every node in the netwok.
2. More optical amplifiers in the network.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
ajukrishnan
Moderator
*****

Posts: 213
Joined: Dec 2009
#2
31-12-2009, 06:37 AM

A seminar and presentation report for LIGHT TREE:

.pdf   LIGHT TREE.pdf (Size: 602.02 KB / Downloads: 762)
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
projectsofme
Active In SP
**

Posts: 1,124
Joined: Jun 2010
#3
25-09-2010, 10:52 AM

For more information about light tree,please follow the link:topicideashow-to-light-tree-seminar and presentation-report?pid=24691#pid24691
Reply
seminar addict
Super Moderator
******

Posts: 6,592
Joined: Jul 2011
#4
06-02-2012, 12:02 PM

to get information about the topic light tree full report ,ppt and related topic refer the link bellow

topicideashow-to-light-tree-seminar and presentation-report

topicideashow-to-light-tree

topicideashow-to-light-trees
Reply
jonssmith
Active In SP
**

Posts: 8
Joined: Feb 2012
#5
18-02-2012, 05:06 PM

Christmas tree lights are either stacked (like the white plugs in photo) or end to end, also called string to string (like the green plugs). Check the boxes of lights before you buy to make sure they're all compatible. By using stacked plugs, you can join more strands than you can with end-to-end type plugs.

Be sure to check the box for the manufacturer's recommendations, however. Usually you can string together three 100-light strands or six 50-light strands.

daytonabeachquarters.com


hotels in daytona florida
Reply
seminar paper
Active In SP
**

Posts: 6,455
Joined: Feb 2012
#6
29-02-2012, 11:45 AM

to get information about the topic light tree full report ,ppt and related topic refer the link bellow

topicideashow-to-light-tree-seminar and presentation-report

topicideashow-to-light-tree

topicideashow-to-light-trees
Reply
seminar ideas
Super Moderator
******

Posts: 10,003
Joined: Apr 2012
#7
13-07-2012, 09:35 AM

to get information about the topic light tree full report ,ppt and related topic refer the link bellow

topicideashow-to-light-tree-seminar and presentation-report

topicideashow-to-light-tree

topicideashow-to-light-trees
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)