Limited-angle torque motor
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
mechanical engineering crazy
Active In SP
**

Posts: 226
Joined: Jul 2009
#1
30-08-2009, 12:26 AM


A special type of brushless motor is called a limited-angle torquer (LAT). LATs are constrained to produce torque through a rotation angle of less than 180 degree, But they are widely used to operate servovalves, direct laser mirrors, position missile-guidance radar antennas, open shutters for heat-seeking sensors, and power other systems that rotate through small angles.

The rotor in a limited-angle torquer carries field magnets, and the stator supports armature windings (similar to the construction of conventional brushless motors). LATs, however, are wound single phase, unlike conventional brushless types, which are typically wound for two or three-phase operation. Single-phase construction eliminates the need for commutation circuitry.

Conventional brushless motors can also be used for limited-angle service. But when conventional three-phase brushless motors are used as LATs, only two of the three leads are used.

Armature windings in some limited-angle torquers are embedded in slots around the inside periphery of a laminated stator, a construction similar to that used with conventional brushless motors. In another design, the armature is toroidally wound on a slotless stator. Here, some stators are laminated and others are solid
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
tauseef52
Active In SP
**

Posts: 6
Joined: Jan 2010
#2
28-01-2010, 12:00 PM

sir pls upload full report on this topic
Reply
computer science technology
Active In SP
**

Posts: 740
Joined: Jan 2010
#3
28-01-2010, 12:19 PM

A special type of brushless motor is called a limited-angle torquer (LAT). LATs are constrained to produce torque through a rotation angle of less than 180 degree, The motor consists of two main assemblies, a rotor assembly contained within a rotor casing and a stator and housing assembly surrounding the rotor casing. One end of the casing is closed, whereas the other end is open to eliminate the need for a dynamic shaft seal. Fluid enters the casing at the open end thereof to provide a lubricating fluid for the rotor bearings and a heat conductive path. The rotor casing isolates the critical movement of the rotor from the contaminated atmosphere of the stator environment and allows replacement of the stator assembly without disturbing the rotor assembly. A permanent magnet rotor may be formed using one or more rare earth magnets which may be suitably bonded to the rotor shaft. A protective cover surrounds the rotor magnets to eliminate potential rotor magnet breakage contamination. The relationship between the rotor magnet angle and stator winding may be such as to produce a relatively large output work potential. Also, the lamination slot configuration and stator winding may be graded to optimize the torque versus rotation profile to more closely match the cosine function of various rotary to linear output gearing to provide a substantially constant force output. A two pole stationary coil rotary magnet motor which provides for increased work and reduced rotary inertia.


please use the links to download it
freepatentsonline4533891.pdf
h2wtechlatmotors.htm
patentstorm.us/patents/4816707/description.html
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Speed control of Brushless DC motor with DSP controller using Matlab seminar tips 2 1,093 10-01-2014, 12:45 PM
Last Post: seminar project topic
  Speed Control of Single Phase Induction Motor Using Short Message Service ppt seminar ideas 1 1,847 06-11-2013, 11:31 AM
Last Post: Guest
  Switched Reluctance Motor Report seminar projects maker 0 629 30-09-2013, 02:54 PM
Last Post: seminar projects maker
  Effect of Voltage and Load Variations on Efficiencies of a Motor-Pump System Report seminar projects maker 0 544 12-09-2013, 12:39 PM
Last Post: seminar projects maker
  INTERFACING STEPPER MOTOR WITH 8051 study tips 0 306 03-08-2013, 02:54 PM
Last Post: study tips
  DIRECT TORQUE CONTROL OF INDUCTION (ANALYSIS AND SIMULATION) MOTOR pdf study tips 0 459 18-07-2013, 04:04 PM
Last Post: study tips
  motor speed monitoring over gsm mobile sssaravana61 1 550 16-07-2013, 09:52 AM
Last Post: study tips
  V/F Control of Squirrel Cage Induction Motor Drives Without Flux or Torque study tips 0 323 26-06-2013, 01:05 PM
Last Post: study tips
  DC MOTOR pdf study tips 0 362 07-06-2013, 12:48 PM
Last Post: study tips
  Single Phase Induction Motor pdf study tips 0 345 30-05-2013, 03:33 PM
Last Post: study tips