Load monitoring
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
seminar surveyer
Active In SP

Posts: 3,541
Joined: Sep 2010
18-10-2010, 10:31 AM

.docx   Load monitoring.docx (Size: 166.82 KB / Downloads: 67)


Load monitoring is the technique of tracking the various types of electrical loads coming on to the power system during a given period of time. Non-intrusive monitoring2 is the monitoring of any system or a parameter of the system without actually entering the system i.e., without the system feeling the presence of the monitoring system.
Hence, non-intrusive load monitoring is the monitoring of the electrical load coming onto the system without actually entering the premises.

The interest among the research community to obtain individual load information such as the nature of the load, its energy consumption, the duration for which it comes on to the system and the time of the day when it was on and off etc. in a network has given rise to many methods of doing so.
However, majority of these methods are intrusive3 in nature since they require the installation of sensors and other data acquisition hardware4 to each device in the circuit. This not only makes the system intrude into consumer’s property but also makes it very expensive.

Load monitoring is the technique of tracking the various types of electrical loads coming onto the power system during a period of time. NALM is the monitoring of any system or a parameter of a system without actually entering the system. NALM has wide range of applications such as power monitoring of devices, monitoring of remote loads & monitoring of individual loads.
Also CIMS (centre for intelligent Monitoring system) is used to monitor wide range of parameters such as temperature, Light pressure, colour, sound radio freq, electrical current and voltage etc.

To conclude that, non intrusive load monitoring is a very cost effective monitoring system in many applications. This can also provide a very convenient and effective method of gathering load data compared to traditional means of placing sensors on each of the individual components of the load...

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  wireless power theft monitoring system and indication at local substations. jaseelati 0 363 10-01-2015, 03:42 PM
Last Post: jaseelati
  radware load balancer configuration guide pdf jaseelati 0 192 10-01-2015, 03:37 PM
Last Post: jaseelati
  load commutated inverter wiki jaseelati 0 260 10-01-2015, 03:09 PM
Last Post: jaseelati
  automatic wireless health monitoring system in hospitals for patients pdf jaseelati 0 329 06-01-2015, 04:35 PM
Last Post: jaseelati
  OFFICE MONITORING SYSTEM project uploader 4 2,122 10-01-2014, 04:28 PM
Last Post: seminar project topic
  Project Monitoring and Control ppt seminar projects maker 0 430 12-09-2013, 02:37 PM
Last Post: seminar projects maker
  agrarian monitoring and alerting system ppt study tips 0 234 17-08-2013, 03:40 PM
Last Post: study tips
Last Post: study tips
  The Use of Lasers in Pollution Monitoring pdf study tips 0 628 19-04-2013, 04:47 PM
Last Post: study tips
  Remote Monitoring And Thought Inference computer science crazy 2 3,614 11-03-2013, 10:50 AM
Last Post: study tips