MANUFACTURING PROCESS OF CAST-RESIN TRANSFORMERS
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
seminar class
Active In SP
**

Posts: 5,361
Joined: Feb 2011
#1
19-02-2011, 09:25 AM


MANUFACTURING PROCESS OF CAST-RESIN TRANSFORMERS
(ABSTRACT)

A variety of types of electrical transformers are made for different purposes. Despite their design differences, the various types employ the same basic principle i.e. electro magnetic induction, coming to cast resin transformer its soul purpose is to over come the problems like pollution, heavy noise and vibration, high maintenance cost, poor reliability and installation problems. Cast-resin power transformers encase the windings in epoxy resin. These transformers simplify installation since they are dry, without cooling oil, and so require no fire-proof vault for indoor installations. The epoxy protects the windings from dust and corrosive atmospheres. At 100% load factor the cast-resin transformers are more cost effective.
This project and implimentation is mainly dealing with the case study of the process of manufacturing the CRT. Which starts with making of HV coils, LV coils, core separately and assembling them on bi-directional rollers and then the necessary accessories like thermistors, relay with alarm are provided and then the necessary tests are conducted to finally certify the product.
It is mostly used in service in diverse industries, Electricity Boards, Nuclear / Thermal / Hydral Power Plants, Railway Traction and high-rise buildings, hospitals, subways, underground vaults, tunnels, school, steel factories, chemical plants, etc. where safety is of prime concern.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  gear manufacturing methods ppt jaseelati 0 255 24-01-2015, 03:57 PM
Last Post: jaseelati
  manufacturing automation protocol ppt jaseelati 0 151 23-12-2014, 01:52 PM
Last Post: jaseelati
  DESIGN AND MANUFACTURING OF HYDRAULIC CYLINDERS REPORT study tips 1 968 05-11-2013, 05:23 PM
Last Post: Guest
  ELECTRICAL MACHINES MANUFACTURING PPT study tips 0 412 20-08-2013, 03:18 PM
Last Post: study tips
  MANUFACTURING PROCESS OF A PISTON ppt study tips 0 953 20-08-2013, 01:08 PM
Last Post: study tips
  MANUFACTURING OF TURBO GENERATORS REPORT study tips 0 431 19-08-2013, 04:09 PM
Last Post: study tips
  Introduction of Unconventional Manufacturing Process study tips 0 475 14-08-2013, 02:10 PM
Last Post: study tips
  AN INVESTIGATION OF THE EFFECT OF PROCESS PARAMETERS ON MRR IN TURNING OF PURE study tips 0 405 05-07-2013, 03:39 PM
Last Post: study tips
  Robots In Manufacturing PPT study tips 0 523 04-06-2013, 12:29 PM
Last Post: study tips
  MANUFACTURING OF WORM GEAR REPORT study tips 0 473 07-05-2013, 04:16 PM
Last Post: study tips