MICRO-SCALE REGENERATIVE HEAT EXCHANGER
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
seminar presentation
Active In SP
**

Posts: 582
Joined: Apr 2010
#1
19-05-2010, 09:32 PM


ABSTRACT
MICRO-SCALE REGENERATIVE HEAT EXCHANGER
A micro-scale regenerative heat exchanger has been designed, optimized and fabricated for use in a micro-Stirling device. Novel design and fabrication techniques enabled the minimization of axial heat conduction losses and pressure drop, while maximizing thermal regenerative performance. The fabricated prototype is comprised of ten separate assembled layers of alternating metal-dielectric composite. Each layer is offset to minimize conduction losses and maximize heat transfer by boundary layer disruption. A grating pattern of 100 micron square non-contiguous flow passages were formed with a nominal 20 micron wall thickness, and an overall assembled ten layer thickness of 900 microns. Application of the micro heat exchanger is envisioned in the areas of micro-refrigerators/coolers,micro-power, and devices micro-fluidic devices.
Meso and/or micro-scale devices operating on the Stirling cycle are an attractive concept based on the high efficiencies realized for Stirling machines at traditional scales. A further attraction of micro-scale Stirling devices is the ability of the Stirling cycle to be used for generating power where a temperature difference is maintained; or, in the
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
seminar presentation
Active In SP
**

Posts: 582
Joined: Apr 2010
#2
29-05-2010, 04:04 PM

MICRO-SCALE REGENERATIVE HEAT EXCHANGER
A micro-scale regenerative heat exchanger has been designed, optimized and fabricated for use in a micro-Stirling device. Novel design and fabrication techniques enabled the minimization of axial heat conduction losses and pressure drop, while maximizing thermal regenerative performance. The fabricated prototype is comprised of ten separate assembled layers of alternating metal-dielectric composite. Each layer is offset to minimize conduction losses and maximize heat transfer by boundary layer disruption. A grating pattern of 100 micron square non-contiguous flow passages were formed with a nominal 20 micron wall thickness, and an overall assembled ten layer thickness of 900 microns. Application of the micro heat exchanger is envisioned in the areas of micro-refrigerators/coolers,micro-power, and devices micro-fluidic devices.
Meso and/or micro-scale devices operating on the Stirling cycle are an attractive concept based on the high efficiencies realized for Stirling machines at traditional scales. A further attraction of micro-scale Stirling devices is the ability of the Stirling cycle to be used for generating power where a temperature difference is maintained; or, in the reverse cycle, producing refrigeration with power input. However, two critical performance issues become highly problematic at the micro-scale for Stirling devices: axial thermal conduction and pressure drop.
Pressure drop in a regenerator is exacerbated by the large surface area to volume ratios inherent in fluid passages at the micro-scale. Viscous forces in such small passages enable the growth of large boundary layers (relative to the passage diameter) and correspondingly large pressure drops and lower heat transfer film coefficients. Micro-scale regenerators must address this pressure drop issue without unduly compromising the heat transfer performance of the device.
Furthermore, for all the regenerators except a reticulated open-cell ceramic concept, the flow passages are continuous and unbroken allowing significant boundary layers to develop. This configuration eliminates the contiguous single-material structural thermal path from the hot end to the cold end.

Submitted by:
SHRUTI BHATNAGAR
MECHANICAL FINAL YEAR

Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
seminar paper
Active In SP
**

Posts: 6,455
Joined: Feb 2012
#3
16-02-2012, 03:20 PM

to get information about the topic micro heat exchanger full report ppt and related topic refer the link bellow

topicideashow-to-micro-scale-regenerative-heat-exchanger

topicideashow-to-helically-coiled-heat-exchangers

topicideashow-to-heat-exchanger
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  large scale power generation using fuel cell abstract jaseelati 0 194 18-12-2014, 02:44 PM
Last Post: jaseelati
  heat recovery steam generator ppt jaseelati 0 242 16-12-2014, 04:30 PM
Last Post: jaseelati
  A Seminar Report On GEOTHERMAL HEAT PUMP seminar projects maker 0 774 30-09-2013, 02:52 PM
Last Post: seminar projects maker
  The use of Micro turbine generators in hybrid electric vehicles study tips 0 383 17-08-2013, 03:33 PM
Last Post: study tips
  How to Design a Shell-and-Tube Heat Exchanger study tips 0 426 03-08-2013, 12:15 PM
Last Post: study tips
  Experimental Compression – Resorption Heat Pump For Industrial Applications report study tips 0 417 03-07-2013, 04:48 PM
Last Post: study tips
  MINI & MICRO HYDRO POWER GENERATION pdf study tips 0 491 29-06-2013, 11:59 AM
Last Post: study tips
  CFD analysis of fin tube heat exchanger with a pair of delta winglet vortex pdf study tips 0 297 20-06-2013, 03:16 PM
Last Post: study tips
  Enhancement of heat transfer using varying width twisted tape inserts study tips 0 349 20-06-2013, 02:04 PM
Last Post: study tips
  Micro Military Connectors (MMC) pdf study tips 0 300 20-05-2013, 03:26 PM
Last Post: study tips