MIMO (Multiple Input Multiple Output)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator

Posts: 3,048
Joined: Dec 2008
24-02-2009, 01:18 AM

The dream of every communication designer is to provide good quality service to each of his customer within the limited available bandwidth. But in the recent years, the amount of data flowing through the channel has increased. But there has been no such high increase in the available bandwidth. So it is a challenge to effectively utilize the channel spectrum along with providing good quality of service across wireless links. One of the possible ways is to use multiple antennas at both the ends of the transmission link. MIMP exploits natural phenomena like multi-path propagation to increase throughput, reduce error rates etc. rather than trying to eliminate them. The main motive behind the MIMO was to increase the user data rates within the constrained spectrum. The initial application of MIMO was proposed for indoor wireless LAN, fixed wireless access networks etc. But now the aim to widen its applications to cover other areas also. The core idea behind the system is to exploit the de-correlation of multiple received signals in the presence of multi-path propagation, there by separating the data streams occupying same bandwidth. Hence Rayleigh fading and constrained total power comes into the figure. Data is transmitted in busts and the receiver knows the channel pattern through the usage of training algorithms; but not necessarily the transmitter. The training sequence enables the receiver to predict the channel coefficients and extract the data coming in multiple streams. To maximize the effect of transmitting rate half of the time interval is used for data transmission and half for training. The adaptive transmission is possible only if the transmitter knows the channel coefficients in advance, so that the more data can be sent through good channels. In case of time division duplex channels, this requires the channel to be stationary and hence channel details need to be fed back at the same rate as the channel characteristics are changing. In case of the frequency division duplex channels, the coefficients should be transmitted at a different frequency. To overcome the fast feedback requirement, the spatial mean of channel coefficients has been proposed; instead of the instantaneous values. This greatly enhances the channel capacity, in case of correlated channels. There is an ongoing effort to standardize the MIMO standard under the name IEEE 802.11n. It will offer up to eight times coverage and about six times data rates, of current 802.11g networks.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
seminar class
Active In SP

Posts: 5,361
Joined: Feb 2011
16-03-2011, 03:51 PM

presented by:
Sagar Bele

MIMO(Multiple Input Multiple Output) Technology
MIMO (multiple input, multiple output) is an antenna technology for wireless communications
in which multiple antennas are used at both the source (transmitter) and the destination
(receiver). The antennas at each end of the communications circuit are combined to minimize
errors and optimize data speed. MIMO is one of several forms of smart antenna technology, the
others being MISO (multiple input, single output) and SIMO (single input, multiple output).
In conventional wireless communications, a single antenna is used at the source, and another
single antenna is used at the destination. In some cases, this gives rise to problems with multipath
effects. When an electromagnetic field (EM field) is met with obstructions such as hills, canyons,
buildings, and utility wires, the wavefronts are scattered, and thus they take many paths to reach
the destination. The late arrival of scattered portions of the signal causes problems such as
fading, cut-out (cliff effect), and intermittent reception (picket fencing).In digital
communications systems such as wireless Internet, it can cause a reduction in data speed and an
increase in the number of errors. The use of two or more antennas, along with the transmission of
multiple signals (one for each antenna) at the source and the destination, eliminates the trouble
caused by multipath wave propagation, and can even take advantage of this effect. MIMO
technology has aroused interest because of its possible applications in digital television (DTV),
wireless local area networks (WLANs), metropolitan area networks (MANs), and mobile
smart paper boy
Active In SP

Posts: 2,053
Joined: Jun 2011
29-07-2011, 09:27 AM

.docx   MIMO systems.docx (Size: 832.7 KB / Downloads: 94)
The Multiple-input multiple-output (MIMO) systems are today regarded as one of the most promising research areas of wireless communications. In MIMO (commonly pronounced my-moh or me-moh), is the use of multiple antennas at both the transmitter and receiver to improve communication performance. It is one of several forms of smart antenna technology.It transmits two or more data bits in same channel at same time using multiantennas at transmitter and receiver. It enables the increase of data rates by transmission of several independent multiplexed data streams on the different transmit antennas. It can enable robust communications, especially in challenging environments for radio propagation, by sending instead redundant information over the multiple antennas. Multiple data streams enable higher data speeds, while with redundancy under less radio-friendly conditions, if one signal is disrupted by interference, the receiver can recover all data from the other. It achieves this by higher spectral efficiency (more bits per second per hertz of bandwidth) and link reliability or diversity (reduced fading).It enables us to make use of variety of signal paths. The increase in spectral efficiency offered by MIMO systems is based on the utilization of space (or antenna) diversity at both the transmitter and the receiver. Space divercity increases robustness of system as it eliminates fades and increases average received signal to noise ratio. According to Shannon’s formula, C = B ln(1 + SNR) as SNR of system increases linearly with space divercity, growth of capacity of channel is logarithmic.
MIMO is also used in Mobile Radio Telephone standards such as recent 3GPP and 3GPP2 standards. In 3GPP, HSPA+(High Speed Packet Acess Plus) and LTE(Long Term Evolution) standards take MIMO into account. As spectral bandwidth is becoming an ever more valuable commodity for radio communications systems, techniques are needed to use the available bandwidth more effectively. MIMO wireless technology is one of these techniques. This makes MIMO wireless technology one of the most important wireless techniques to be employed in recent years.
Functions of MIMO:
MIMO can be sub-divided into three main categories.
Precoding is multi-stream beamforming in the narrowest definition. In more general terms, it is considered to be all spatial processing that occurs at the transmitter. In (single-layer) beamforming, the same signal is emitted from each of the transmit antennas with appropriate phase (and sometimes gain) weighing such that the signal power is maximized at the receiver input. The benefits of beamforming are to increase the received signal gain, by making signals emitted from different antennas add up constructively, and to reduce the multipath fading effect. In the absence of scattering, beamforming results in a well defined directional pattern, but in typical cellular conventional beams are not a good analogy. When the receiver has multiple antennas, the transmit beamforming cannot simultaneously maximize the signal level at all of the receive antennas, and precoding with multiple streams is used.
Spatial multiplexing requires MIMO antenna configuration. In spatial multiplexing, a high rate signal is split into multiple lower rate streams and each stream is transmitted from a different transmit antenna in the same frequency channel. If these signals arrive at the receiver antenna array with sufficiently different spatial signatures, the receiver can separate these streams into (almost) parallel channels. Spatial multiplexing is a very powerful technique for increasing channel capacity at higher signal-to-noise ratios (SNR). The maximum number of spatial streams is limited by the lesser in the number of antennas at the transmitter or receiver. Spatial multiplexing can be used with or without transmit channel knowledge. Spatial multiplexing can also be used for simultaneous transmission to multiple receivers, known as space division multiple access.
Diversity coding techniques are used when there is no channel state information at the transmitter. In diversity methods, a single stream (unlike multiple streams in spatial multiplexing) is transmitted, but the signal is coded using techniques called space time coding. The signal is emitted from each of the transmit antennas with full or near orthogonal coding. Diversity coding exploits the independent fading in the multiple antenna links to enhance signal diversity. Because there is no channel knowledge, there is no beamforming or array gain from diversity coding. Spatial multiplexing can also be combined with precoding when the channel is known at the transmitter or combined with diversity coding when decoding reliability is in trade-off.
Forms of MIMO:
The terminology and methods used in MIMO can differ from system to system, however most fall into one of two categories:
SU-MIMO (Single User - MIMO) - this utilizes MIMO technology to improve the performance towards a single user.
MU-MIMO (Multi User - MIMO) - this enables multiple users to be served through the use of spatial multiplexing techniques.
The STC (Space Time Coding) method is typically used in SU-MIMO. This utilizes multiple antennas to transmit the same information, however the data on each antenna is diversity coded, i.e. intelligently reordered in time. The following diagram illustrates this concept. In a standard SISO (Single Input Single Output) or SIMO (Single Input Multiple Output) system, only a single transmit stream is used (this is illustrated as the blue line). It can be seen that the additional diversity stream (green line) is time coded and transmitted from a second antenna, i.e. spatial diversity. This provides a combination of space and time coding. If interference / errors occur on one of the streams, the other is still able to carry the data successfully. In addition, if there was interference in the time domain, which affected both streams (denoted by the “X” in the diagram) the bits lost are duplicated at different times on the different streams. This permits the system to handle more interference and thus enables the use of HOM (Higher Order Modulation) schemes and / or reduction in FEC (Forward Error Correction) overhead. As such, STC can either provide users with a more efficient connection, or it could be used to extend the range of a cell.
Anurag Singh 1501
Active In SP

Posts: 2
Joined: Nov 2011
07-11-2011, 04:46 PM

I want the PDF file for this report
seminar addict
Super Moderator

Posts: 6,592
Joined: Jul 2011
08-11-2011, 09:57 AM

to get information about the topic "MIMO Multiple Input Multiple Output)" refer the link bellow

seminar ideas
Super Moderator

Posts: 10,003
Joined: Apr 2012
17-04-2012, 12:25 PM


.ppt   MIMO.ppt (Size: 604 KB / Downloads: 21)


In radio ‘multiple-input and multiple-output’ or MIMO is the use of multiple antennas at both the transmitter and receiver to improve communication performance. It is one of several forms of smart antenna technology.


(SM)Spatial multiplexing is a principle technology Of MIMO wireless technology.
It is given by Arogyaswami Paulraj and Thomas Kailath in 1993.


There are two form of MIMO
Multiantenna Type MIMO
Multiuser Type MIMO


MIMO offer fast ,easy and secure wireless solution for
notebook user
It increase the coverage up to eight times and the speed up to six times.

It can setup a high speed secure wireless network with in a minute with the push of button and a click of button .


At the end we are just comparing MIMO technology with
some advanced features in wireless technology
More coverage area
Increase in data speed
Increase in number of user
Increase in capacity in efficiency


Posts: 45
Joined: Apr 2011
17-04-2012, 05:12 PM

MIMO can be used anywhere .
In radio MIMO is the usage of both the antennas at transmitters and a receivers
seminar ideas
Super Moderator

Posts: 10,003
Joined: Apr 2012
18-04-2012, 10:30 AM

to get information about the topic "MIMO (Multiple Input Multiple Output)" full report ppt and related topic refer the link bellow



Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Multiple Access Techniques for Wireless Communication PPT study tips 0 520 28-08-2013, 02:47 PM
Last Post: study tips
  MIMO Wireless Communications pdf study tips 0 488 20-08-2013, 04:55 PM
Last Post: study tips
  Report on Communication MIMO Wireless study tips 0 330 31-07-2013, 12:40 PM
Last Post: study tips
Last Post: study tips
  3TU course on MIMO Wireless Communication PPT study tips 0 312 14-05-2013, 02:37 PM
Last Post: study tips
  Skinput: Appropriating the Body as an Input Surface seminar surveyer 21 15,892 21-03-2013, 03:47 PM
Last Post: study tips
  Linear Precoding for Orthogonal Space-Time Block Coded MIMO-OFDM Cognitive Radio uploader 1 840 18-03-2013, 12:29 PM
Last Post: Guest
  WIDEBAND CODE DIVISION MULTIPLE ACCESS PPT study tips 0 369 05-03-2013, 12:53 PM
Last Post: study tips
  I-pen digital writter pen optical usb mouse input device PPT study tips 0 451 19-02-2013, 10:57 AM
Last Post: study tips
  High-Throughput QR Decomposition for MIMO Detection in OFDM Systems seminar tips 0 273 25-01-2013, 01:49 PM
Last Post: seminar tips