Monitoring and Transmission of Heavy Vehicles Parameters using Fixed Cellular Termina
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Electrical Fan
Active In SP
**

Posts: 438
Joined: Aug 2009
#1
14-12-2009, 07:05 PM


At present any consignment carried by a vehicle has to travel incommunicado till it reaches the destination. So, both the fleet owner and the persons sending or procuring the consignment have to sit keeping their fingers crossed till the fleet arrives. To track the path of the vehicle and to monitor the various parameters like fuel consumption, kilometers covered and the amount of load in the vehicle an intelligent device would come handy to solve the problem for the fleet operators and the clients. This paper aims at designing an intelligent device, which has two parts: the transmitter and the receiver. The transmitter is set up in the truck and it consists of a microcontroller to which the GPS and the GSM modem are connected. The analog signals from the transducers, which are used to detect the amount of load and the fuel in the truck, are sent to the microcontroller. The microcontroller acquires the position of the truck from the GPS and sends it to the receiver along with the analog values, through the GSM modem using SMS. The receiver consists of a computer to which a GSM modem is connected by its serial port. The SMS is received by the GSM modem and is sent to the computer, which makes use of a map plotting software to plot the position of the truck along with its parameters
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Anti Theft System for Electronic Equipments using Inertial MEMS Sensor and ZigBee seminar ideas 2 1,912 11-10-2014, 06:29 PM
Last Post: Guest
  WEATHER MONITORING AND INSTRUMENT CONTROL SYSTEM USING MICROCONTROLLER project report tiger 6 7,070 04-10-2014, 08:55 PM
Last Post: OsKFAHX
  Mitter – Bitter Monitoring System Using Android Smartphone’s PPT study tips 4 2,152 26-09-2014, 06:18 PM
Last Post: Guest
  Wireless intelligent billing trolley for shopping malls using Zigbee and RFID seminar ideas 1 2,815 03-09-2014, 02:51 PM
Last Post: kale sandip suryabhan
  Modeling and Testing of a Digital Distance Relay Using MATLAB/SIMULINK smart paper boy 11 3,515 30-04-2014, 09:40 AM
Last Post: seminar project topic
  WIRELESS BLACK BOX USING MEMS ACCELEROMETER AND GPS TRACKING FOR ACCIDENTAL study tips 2 1,190 22-04-2014, 09:48 AM
Last Post: seminar project topic
  Body temperature and ECG monitoring using an SMS based telemedicine system ppt seminar flower 5 2,596 10-04-2014, 09:49 AM
Last Post: seminar project topic
  FIRE AND SMOKE DETECTION USING AT89c51 seminar flower 1 734 27-12-2013, 02:22 PM
Last Post: Guest
  Retrieving Files Using Content Based Searching and presenting it in Carousel view computer science crazy 4 4,154 26-10-2013, 06:04 PM
Last Post: Guest
  Fault Detection and Protection of Induction Motors Using Sensors computer science crazy 4 4,295 16-10-2013, 09:21 PM
Last Post: Guest