Optical packet switch architectures
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator
******

Posts: 3,048
Joined: Dec 2008
#1
21-09-2008, 11:46 AM


Definition

Space switch fabric architecture is shown in figure. The switch consists of N incoming and N out going fiber links, with n wavelengths running on each fiber link. The switch is slotted, and the length of the slot is such that an optical packet can be transmitted and propagated from an input port to an out put optical buffer.

The switch fabric consists of three parts; optical packet encoder, space switch, and optical packet buffer. The optical packet buffer works as follows. For each incoming fiber link, three is an optical demultiplexer, which divides the incoming optical signal to different wavelengths. Each wavelength is fed to a different tunable wavelength converter ( TWC), which converts the wave length of the optical packet to a wavelength that is free at the destination optical output fiber. Then, through the space switch fabric, the optical packet can be switched to any of the N out put optical buffers.

Specifically the out put of a TWC is fed to a splitter, which distributes the same signal to N different out put fibbers, one per out put fibber. The signal on each of these out put fibbers goes through another splitter, which distributes this in to d+1 different out put fibbers, and each out put is connected through an optical gate to one of the ODLs of the destination out put buffer. The optical packet is forwarded to an ODL by appropriately keeping one optical gate open and closing the rest. The information regarding to which wavelength of an incoming packet and the decision as to which ODL of the destination out put buffer the packet will be switched to is provided by the control unit, which ahs knowledge of the state of the entire switch.

Each out put buffer is an optical buffer implemented as follows. It consists of d+1 ODLs, numbered from 0 to d. ODL1 delays optical packet for a fixed delay equal to 1 slots. ODL0 provides zero delay, and a packet arriving at this ODL is simply transmitted out of the out put port.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  automatic changeover switch ppt jaseelati 0 396 09-12-2014, 03:59 PM
Last Post: jaseelati
  DESIGN OF AUTOMATIC CHANGE OVER SWITCH WITH GENERATOR CONTROL MECHANISM pdf seminar projects maker 0 2,223 25-09-2013, 12:54 PM
Last Post: seminar projects maker
  A Seminar Report On OPTICAL BURST SWITCHING study tips 0 878 02-08-2013, 03:11 PM
Last Post: study tips
  MAGNETO OPTICAL CURRENT TRANSFORMER PPT study tips 0 722 22-07-2013, 04:56 PM
Last Post: study tips
  STUDY OF NUMERICAL APERTURE OF OPTICAL FIBER study tips 0 523 20-07-2013, 02:57 PM
Last Post: study tips
  STUDY OF LOSSES IN OPTICAL FIBER study tips 0 408 20-07-2013, 02:55 PM
Last Post: study tips
  Video Semaphore Decoding for Free-Space Optical Communication pdf study tips 0 431 03-07-2013, 04:52 PM
Last Post: study tips
  Receiver & Transmitter Architectures study tips 0 335 14-06-2013, 12:19 PM
Last Post: study tips
  Clap Switch Report study tips 0 411 04-06-2013, 04:46 PM
Last Post: study tips
  Optical code-division multiple-access (O-CDMA) Report study tips 0 402 30-05-2013, 12:12 PM
Last Post: study tips