Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator

Posts: 3,048
Joined: Dec 2008
17-04-2009, 06:21 PM


Ø Polymer LED (light-emitting diode) - sometimes called light-emitting polymer or polyLED - is a technology based on the use of polymer as the semiconductor material in LEDs.

Ø Polymers are chemical substances that consist of large molecules that are themselves, made from many smaller and simpler molecules.

Ø Polymers are largely identified with insulation.

Research institutes have come up with ideas to integrate polymers into main stream electronics as it has been established that certain polymers have typical conductive and light emitting properties.

PLED-A Review

Ø The making of the first PLED is credited to the Cavendish Laboratory of Cambridge University in 1989.

Ø Polyphenylene vinylene (PPV) was found to emit yellow-green light when sandwiched between a pair of electrodes. The initial device efficiencies were very low .

Ø PLEDs today have a number of intrinsic advantages over liquid crystal devices :

v PLED is an emissive technology

v does not require additional elements such as backlights, filters and polarizers.

v PLED technology is very energy efficient.

Ø Now a breakthrough in blue-emitting polymer material has solved the problem to create full-color organic-LED (OLED) displays. This has resulted in the possibility of a new class of light-emitting plastic displays that promise to be simultaneously lightweight and low in profile, power and cost.

Working of PLEDs

Ø An amorphous film of the PLED material is sandwiched between two metallic electrodes forming the anode and cathode on a transparent substrate

Ø Electronic charges are injected into the polymer from the electrodes: electrons from the cathode, and 'holes' from the anode

Ø The electrons and holes 'capture each other' through electrostatic interaction

Ø Radiative recombination of electron and hole generates light

Ø The wavelength of this emitted light depends on the band gap of the polymer used.

Ø A transparent electrode with a large work function. Indium Tin Oxide (ITO) is commonly used.

Ø A layer of PLED material less than 100nm thick. PPV and its derivatives are commonly used.

Ø A metallic electrode with a low work function, typically calcium.

Features and Benefits of PLEDs

Ø Features include:

v Perception

v Power

v Temperature behaviour

Ø Its benefits are mostly in the following areas:

v Processability, patternable, light emitting, thin films, low voltage, solid state devices, light weight, fast swithching speed and formable substrates


The world has already seen the first commercial products and prototypes which demonstrate some of the potential of polymer light emitting diode technology.

Ø Philips™ thin-film PolyLED technology will enable the production of full-color displays less than 1 mm thick. Combined with a large viewing angle, high brightness and contrast, and full video capability, PolyLED displays are ideal for the next generation of information displays.

Ø The Sensotec Philishave is the first ever product equipped with a display based on superior PolyLED technology and is prominently featured in the latest James Bond movie, Die Another Day

Ø The Kodak display AM550L, with PolyLEDS features 165-degree viewing on a 2.2-inch screen that is up to 107 percent larger than the LCDs on most cameras

Ø New 639 mobile telephone from Philips, using 'Magic Mirror' technology. The clam shell design provides a mirror for checking personal grooming when it is closed. Incoming calls are indicated by the display showing through the mirror - a highly effective use of a secondary display.

Ø Other new fields of applications, such as light emitting advertisement, corporate identity signs, greeting cards, gadgets etc.

Ø These are just a brief look at the advancement of PLEDs, in the near future the PLEDs will completely replace conventional display panels, lighting instruments. The PolyLED has three major advantages over its silicon counterpart: it has a high contrast, a high brightness and requires much less power. In addition, the production of the PolyLED has fewer restrictions in terms of size. This offers the prospect of the ultimate use of the PolyLED: a cheap, lightweight, roll-down screen for a computer, a TV or a laptop, made entirely of plastic.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Active In SP

Posts: 2
Joined: Jul 2009
08-07-2009, 06:40 PM

vl u pls send me the details of POLYLED
project report helper
Active In SP

Posts: 2,270
Joined: Sep 2010
19-10-2010, 01:18 PM

.doc   light emiting polymers seminar report.doc (Size: 688 KB / Downloads: 99)
polymer based light emitting diodes


Light emitting polymers or polymer based light emitting diodes discovered by Friend et al in 1990 has been found superior than other displays like, liquid crystal displays (LCDs) vacuum fluorescence displays and electro luminescence displays. Though not commercialised yet, these have proved to be a mile stone in the filed of flat panel displays. Research in LEP is underway in Cambridge Display Technology Ltd (CDT), the UK.

In the last decade, several other display contenders such as plasma and field emission displays were hailed as the solution to the pervasive display. Like LCD they suited certain niche applications, but failed to meet broad demands of the computer industry.

Today the trend is towards the non_crt flat panel displays. As LEDs are inexpensive devices these can be extremely handy in constructing flat panel displays. The idea was to combine the characteristics of a CRT with the performance of an LCD and added design benefits of formability and low power. Cambridge Display Technology Ltd is developing a display medium with exactly these characteristics.

The technology uses a light-emitting polymer (LEP) that costs much less to manufacture and run than CRTs because the active material used is plastic.


Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  automatic room light controller with bidirectional visitor counter project report jaseelati 0 301 02-02-2015, 03:54 PM
Last Post: jaseelati
  automatic room light controller with visitor counter jaseelati 0 294 21-01-2015, 03:40 PM
Last Post: jaseelati
  traffic light controller verilog code jaseelati 0 433 17-01-2015, 04:33 PM
Last Post: jaseelati
  polymer memory ppt jaseelati 0 272 15-01-2015, 04:31 PM
Last Post: jaseelati
  automatic light controller project report jaseelati 0 411 10-01-2015, 04:31 PM
Last Post: jaseelati
  automatic room light controller with bidirectional visitor counter pdf jaseelati 0 288 05-01-2015, 03:20 PM
Last Post: jaseelati
  light sensitive trigger project report jaseelati 0 243 01-01-2015, 03:50 PM
Last Post: jaseelati
  light fence mini project jaseelati 0 355 23-12-2014, 04:52 PM
Last Post: jaseelati
  automatic room light controller pdf jaseelati 0 175 23-12-2014, 02:11 PM
Last Post: jaseelati
  Automatic Emergency Light full report seminar class 7 17,620 08-03-2014, 02:28 PM
Last Post: seminar project topic