PULSE POWER PLUG full report
Thread Rating:
  • 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
seminar topics
Active In SP
**

Posts: 559
Joined: Mar 2010
#1
28-12-2010, 03:33 PM



.docx   PULSE POWER PLUG.docx (Size: 180.29 KB / Downloads: 105)


INTRODUCTION


Pulstar pulse plugs by Enerpulse look and fit like traditional spark plugs, but are exponentially more powerful. Pulstars discharge with 10 times the energy of a spark plug! This high power pulse discharge ignites the compressed air/fuel mixture in the cylinder more precisely and completely, producing on average 6% better fuel economy and torque.

With the assistance of Sandia National Laboratories in Albuquerque, Enerpulse developed Pulstar™ to increase the peak power of the spark by 10 times and ignite gasoline in the engine's cylinder more completely, with less cycle-to-cycle variation. The result is more engine torque, more horsepower and better fuel economy.
The high power of the Pulstar™ will not damage an engine because the high power event lasts only for 2 microseconds (billionths of a second). This very brief moment is enough to ignite the fuel in the cylinder, but too brief to overheat the combustion chamber or metal engine components. So it will neither harm your engine nor void your manufacturer's warranty.
Pulstar™ looks like a spark plug because it was designed to fit into the same hole in your engine. But, internally, Pulstar™ is very different, incorporating a pulse circuit no other plug has. This is why we call Pulstar™ a "pulse plug" and not a spark plug


WHAT MAKES A PULSE PLUG?



Terminal: This is the primary connection point to the rest of the ignition system. It is shaped so the wire usually just snaps onto the top of the plug.

Insulator:Made from an aluminum oxide ceramic that is able to withstand very high temperatures and protect against the high-voltages that the ignition system requires from ‘leaking out’.

Resistor: This is what keeps EMI and RFI from getting into the advanced computer systems of today’s automobiles.

Pulse Circuit:This is what separates a pulse plug from a normal plug. Here, the energy is stored to be released into the gap once breakdown voltage is achieved by the ignition system. A typical plug will have only the resistor then a conductor that continues to the center electrode.


Plated Shell:This provides the hex to torque down the plug, the threads to hold the plug in the engine, the sealing surface to keep combustion gasses in the engine, the mounting point for the ground strap and the connection to ground for the plug.

Gas Seal: This part of the plug keeps the combustion gasses from just pressing out the center electrode on the plug and causing a leak. Center Electrode: The center electrodes on plugs are made from many different materials from copper to inconel to iridium. This is the first half of the plug that actually creates the gap for the spark.

Ground Strap: The ground strap is the second part of the gap and comes in a multitude of shapes and materials
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  robots in radioactive environment full report project report tiger 14 16,622 27-04-2015, 07:00 PM
Last Post: Guest
  pulse detonation engine ppt jaseelati 0 288 02-03-2015, 02:35 PM
Last Post: jaseelati
  automatic power loom project report jaseelati 0 287 27-02-2015, 01:41 PM
Last Post: jaseelati
  power transmission system in automobile ppt jaseelati 0 256 19-02-2015, 04:16 PM
Last Post: jaseelati
  wireless power theft monitoring with automatic circuit breaker system jaseelati 0 240 18-02-2015, 01:15 PM
Last Post: jaseelati
  thermoelectric power generation ppt jaseelati 0 267 17-02-2015, 02:45 PM
Last Post: jaseelati
  power theft identification ppt jaseelati 0 203 06-02-2015, 04:45 PM
Last Post: jaseelati
  microcontroller based power theft identification ppt jaseelati 0 194 06-02-2015, 03:29 PM
Last Post: jaseelati
  electrical power generation using footsteps ppt jaseelati 0 229 06-02-2015, 03:23 PM
Last Post: jaseelati
  footstep power generation jaseelati 0 241 06-02-2015, 03:20 PM
Last Post: jaseelati