Porous Metal Design Guidebook
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
project report helper
Active In SP
**

Posts: 2,270
Joined: Sep 2010
#1
15-10-2010, 04:16 PM



.pdf   Porous Metal Design Guidebook.pdf (Size: 708.19 KB / Downloads: 34)

Porous Metal Design Guidebook
Introduction and Definitions
This article provides general information about porous sintered metals made from metal powders, describes methods of manufacture and includes information concerning design data and applications. Porous metal materials have engineered, inter-connected porosity that are fabricated from metal powder particles using powder metallurgy (PM) techniques. The following terms are helpful for understanding industry definitions and related standards: Pores- The open volume within the metal matrix or network. Interconnected Porosity- Pores that are connected together and to the surfaces of the component to allow fluid flow from one side to the other. By contrast, isolated pores do not have connectivity to both surfaces to allow fluid flow. Percent Porosity- a rough measure of the open volume equal to 100% minus the part density. The total open volumes of interconnected and isolated porosity are normally included in this value. Pore Shape, Pore Size and Pore Size Distribution are critical factors when describing the open volume available. Particle Retention Rating- indication of the size of the particles removed from a fluid during filtration. The test method and filtration efficiency must be specified to compare particle retention ratings of filters.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  seminar topics for mtech machine design jaseelati 0 268 25-02-2015, 01:39 PM
Last Post: jaseelati
  design of a manually operated paper-recycling machine jaseelati 0 246 17-02-2015, 01:44 PM
Last Post: jaseelati
  leaf spring design ppt jaseelati 0 201 13-02-2015, 01:51 PM
Last Post: jaseelati
  axiomatic design ppt jaseelati 0 208 06-02-2015, 03:48 PM
Last Post: jaseelati
  lifting lug design handbook jaseelati 0 207 22-01-2015, 03:29 PM
Last Post: jaseelati
  intze tank design procedure jaseelati 0 199 09-01-2015, 01:18 PM
Last Post: jaseelati
  effect of metal coupling on rusting of iron jaseelati 0 228 05-01-2015, 03:57 PM
Last Post: jaseelati
  design of domes nptel jaseelati 0 185 16-12-2014, 02:31 PM
Last Post: jaseelati
  DESIGN AND ANALYSIS OF SOLAR THERMOELECTRIC REFRIGERATION SYSTEM seminar tips 2 1,091 07-03-2014, 03:32 PM
Last Post: seminar project topic
  Design and Fabrication of Compressed Air Engine pdf study tips 1 992 23-02-2014, 12:15 PM
Last Post: ss