Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Active In SP

Posts: 1,124
Joined: Jun 2010
11-10-2010, 09:47 AM

This article is presented by:
By Armin Gerritsen

Which one is better? -
RISC vs CISC is a topic quite popular on the Net. Everytime Intel (CISC) or Apple (RISC) introduces a new CPU, the topic pops up again. But what are CISC and RISC exactly, and is one of them really better?
This article tries to explain in simple terms what RISC and CISC are and what the future might bring for the both of them. This article is by no means intended as an article pro-RISC or pro-CISC. You draw your own conclusions …
Pronounced sisk, and stands for Complex Instruction Set Computer. Most PC's use CPU based on this architecture. For instance Intel and AMD CPU's are based on CISC architectures.
Typically CISC chips have a large amount of different and complex instructions. The philosophy behind it is that hardware is always faster than software, therefore one should make a powerful instructionset, which provides programmers with assembly instructions to do a lot with short programs.
In common CISC chips are relatively slow (compared to RISC chips) per instruction, but use little (less than RISC) instructions.
Pronounced risk, and stands for Reduced Instruction Set Computer. RISC chips evolved around the mid-1980 as a reaction at CISC chips. The philosophy behind it is that almost no one uses complex assembly language instructions as used by CISC, and people mostly use compilers which never use complex instructions. Apple for instance uses RISC chips.
Therefore fewer, simpler and faster instructions would be better, than the large, complex and slower CISC instructions. However, more instructions are needed to accomplish a task.
An other advantage of RISC is that - in theory - because of the more simple instructions, RISC chips require fewer transistors, which makes them easier to design and cheaper to produce.
Finally, it's easier to write powerful optimised compilers, since fewer instructions exist.

There is still considerable controversy among experts about which architecture is better. Some say that RISC is cheaper and faster and therefor the architecture of the future.
Others note that by making the hardware simpler, RISC puts a greater burden on the software. Software needs to become more complex. Software developers need to write more lines for the same tasks.
Therefore they argue that RISC is not the architecture of the future, since conventional CISC chips are becoming faster and cheaper anyway.
RISC has now existed more than 10 years and hasn't been able to kick CISC out of the market. If we forget about the embedded market and mainly look at the market for PC's, workstations and servers I guess a least 75% of the processors are based on the CISC architecture. Most of them the x86 standard (Intel, AMD, etc.), but even in the mainframe territory CISC is dominant via the IBM/390 chip. Looks like CISC is here to stay …
Is RISC than really not better? The answer isn't quite that simple. RISC and CISC architectures are becoming more and more alike. Many of today's RISC chips support just as many instructions as yesterday's CISC chips. The PowerPC 601, for example, supports more instructions than the Pentium. Yet the 601 is considered a RISC chip, while the Pentium is definitely CISC. Further more today's CISC chips use many techniques formerly associated with RISC chips.
So simply said: RISC and CISC are growing to each other.
An important factor is also that the x86 standard, as used by for instance Intel and AMD, is based on CISC architecture. X86 is thé standard for home based PC's. Windows 95 and 98 won't run at any other platform. Therefore companies like AMD an Intel will not abandoning the x86 market just overnight even if RISC was more powerful.
Changing their chips in such a way that on the outside they stay compatible with the CISC x86 standard, but use a RISC architecture inside is difficult and gives all kinds of overhead which could undo all the possible gains. Nevertheless Intel and AMD are doing this more or less with their current CPU's. Most acceleration mechanisms available to RISC CPUs are now available to the x86 CPU's as well.
Since in the x86 the competition is killing, prices are low, even lower than for most RISC CPU's. Although RISC prices are dropping also a, for instance, SUN UltraSPARC is still more expensive than an equal performing PII workstation is.
Equal that is in terms of integer performance. In the floating point-area RISC still holds the crown. However CISC's 7th generation x86 chips like the K7 will catch up with that.
The one exception to this might be the Alpha EV-6. Those machines are overall about twice as fast as the fastest x86 CPU available. However this Alpha chip costs about €20000, not something you're willing to pay for a home PC.
Maybe interesting to mention is that it's no coincidence that AMD's K7 is developed in co-operation with Alpha and is for al large part based on the same Alpha EV-6 technology.
The biggest threat for CISC and RISC might not be eachother, but a new technology called EPIC. EPIC stands for Explicitly Parallel Instruction Computing. Like the word parallel already says EPIC can do many instruction executions in parallel to one another.
EPIC is a created by Intel and is in a way a combination of both CISC and RISC. This will in theory allow the processing of Windows-based as well as UNIX-based applications by the same CPU.
It will not be until 2000 before we can see an EPIC chip. Intel is working on it under code-name Merced. Microsoft is already developing their Win64 standard for it. Like the name says, Merced will be a 64-bit chip.
If Intel's EPIC architecture is successful, it might be the biggest thread for RISC. All of the big CPU manufactures but Sun and Motorola are now selling x86-based products, and some are just waiting for Merced to come out (HP, SGI). Because of the x86 market it is not likely that CISC will die soon, but RISC may.
So the future might bring EPIC processors and more CISC processors, while the RISC processors are becoming extinct.
The difference between RISC and CISC chips is getting smaller and smaller. What counts is how fast a chip can execute the instructions it is given and how well it runs existing software. Today, both RISC and CISC manufacturers are doing everything to get an edge on the competition.
The future might not bring victory to one of them, but makes both extinct. EPIC might make first RISC obsolete and later CISC too.

seminar paper
Active In SP

Posts: 6,455
Joined: Feb 2012
29-03-2012, 11:45 AM


.ppt   risc and sisc.ppt (Size: 569 KB / Downloads: 65)

Introduction - RISC and CISC

Boundaries have blurred.

Modern CPUs Utilize features of both.

The Manufacturing and Economics aspect.

Debate becoming moot
Converging implementations , example

Typical RISC features :
Fewer Instructions
Fixed instruction length
Fixed execution time
Lower Cost
No longer restricted to RISC.

CISC to RISC (1)

What Intel, the most famous CISC advocates, and HP do in IA-64:
Migrate to a Common Instruction Set.
Creating Small Instructions
More concise Instruction Set.
Shorter Pipeline
Lower Clock Cycle


Incorporating Same Features
Complex Multi-level Cache
Branch Prediction
Out-of-order Execution

Even More Transistors

Then more transistors became available than single CISC CPU and reasonable cache could use… What now?
Multi-processor chips?

seminar flower
Super Moderator

Posts: 10,120
Joined: Apr 2012
01-10-2012, 12:23 PM


.ppt   RISC and CISC - Eugene Clewlow.ppt (Size: 274.5 KB / Downloads: 14)

History of RISC/CISC

1950s IBM instituted a research program
1964 Release of System/360
Mid-1970s improved measurement tools demonstrated on CISC
1975 801 project and implimentation initiated at IBM’s Watson Research Center
1979 32-bit RISC microprocessor (801) developed led by Joel Birnbaum
1984 MIPS developed at Stanford, as well as project and implimentations done at Berkeley
1988 RISC processors had taken over high-end of the workstation market
Early 1990s IBM’s POWER (Performance Optimization With Enhanced RISC) architecture introduced w/ the RISC System/6k
AIM (Apple, IBM, Motorola) alliance formed, resulting in PowerPC

What is CISC?

CISC is an acronym for Complex Instruction Set Computer and are chips that are easy to program and which make efficient use of memory. Since the earliest machines were programmed in assembly language and memory was slow and expensive, the CISC philosophy made sense, and was commonly implemented in such large computers as the PDP-11 and the DECsystem 10 and 20 machines.
Most common microprocessor designs such as the Intel 80x86 and Motorola 68K series followed the CISC philosophy.
But recent changes in software and hardware technology have forced a re-examination of CISC and many modern CISC processors are hybrids, implementing many RISC principles.
CISC was developed to make compiler development simpler. It shifts most of the burden of generating machine instructions to the processor. For example, instead of having to make a compiler write long machine instructions to calculate a square-root, a CISC processor would have a built-in ability to do this.

CISC Attributes

The design constraints that led to the development of CISC (small amounts of slow memory and fact that most early machines were programmed in assembly language) give CISC instructions sets some common characteristics:
A 2-operand format, where instructions have a source and a destination. Register to register, register to memory, and memory to register commands. Multiple addressing modes for memory, including specialized modes for indexing through arrays
Variable length instructions where the length often varies according to the addressing mode
Instructions which require multiple clock cycles to execute.
E.g. Pentium is considered a modern CISC processor

CISC Disadvantages

Designers soon realised that the CISC philosophy had its own problems, including:
Earlier generations of a processor family generally were contained as a subset in every new version - so instruction set & chip hardware become more complex with each generation of computers.
So that as many instructions as possible could be stored in memory with the least possible wasted space, individual instructions could be of almost any length - this means that different instructions will take different amounts of clock time to execute, slowing down the overall performance of the machine.
Many specialized instructions aren't used frequently enough to justify their existence -approximately 20% of the available instructions are used in a typical program.
CISC instructions typically set the condition codes as a side effect of the instruction. Not only does setting the condition codes take time, but programmers have to remember to examine the condition code bits before a subsequent instruction changes them.

What is RISC?

RISC? RISC, or Reduced Instruction Set Computer. is a type of microprocessor architecture that utilizes a small, highly-optimized set of instructions, rather than a more specialized set of instructions often found in other types of architectures.
History The first RISC project and implimentations came from IBM, Stanford, and UC-Berkeley in the late 70s and early 80s. The IBM 801, Stanford MIPS, and Berkeley RISC 1 and 2 were all designed with a similar philosophy which has become known as RISC. Certain design features have been characteristic of most RISC processors:
one cycle execution time: RISC processors have a CPI (clock per instruction) of one cycle. This is due to the optimization of each instruction on the CPU and a technique called PIPELINING
pipelining: a techique that allows for simultaneous execution of parts, or stages, of instructions to more efficiently process instructions;
large number of registers: the RISC design philosophy generally incorporates a larger number of registers to prevent in large amounts of interactions with memory

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Debugging Embedded Systems Advanced RISC Machines Inc (ARM) seminar ideas 1 721 28-01-2013, 09:40 AM
Last Post: seminar tips
  RISC Vs. CISC full report seminar tips 0 515 14-01-2013, 03:22 PM
Last Post: seminar tips
  REDUCED INSTRUCTION SET COMPUTERS (RISC) project girl 0 319 24-12-2012, 02:57 PM
Last Post: project girl
  RISC vs. CISC ppt seminar ideas 1 1,263 30-06-2012, 12:01 PM
Last Post: seminar flower
  Reduced Instruction Set Computer (RISC) processor project report helper 0 1,572 22-10-2010, 04:06 PM
Last Post: project report helper
  microcontrollers based on CISC architecture. RICS stands for Reduced Instruction Set seminar surveyer 1 2,694 14-10-2010, 12:39 PM
Last Post: projectsofme