Radio Frequency Identification
Active In SP
Joined: Oct 2009
30-10-2009, 04:02 PM
Radio Frequency Identification (RFID) is an upcoming technology which has application over a large domain of industries. It can be termed as the long term replacement for bar coding in the field of automatic data capturing. It has the potential to significantly change the way processes occur and companies operate. The last few years have seen several developments that have sped up the adoption of this technology. 1) The emergence of major consumer applications have brought RFID from an experimental technology into the mainstream. 2) The development of smart labels has also been a major thrust in its case against the existing bar codes. This paper discusses the technology involved in RFID as well as its real life application proffles. This is an attempt at understanding the technology better.
Radio Frequency Identification.pdf (Size: 186.93 KB / Downloads: 152)
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Active In SP
Joined: Feb 2011
28-02-2011, 03:17 PM
Radio Frequency Identification2.doc (Size: 58 KB / Downloads: 81)
Radio Frequency Identification
Radio Frequency Identification (RFID) is an automatic identification method, relying on storing and remotely retrieving data using devices called RFID tags or transponders. An RFID tag is an object that can be attached to or incorporated into a product, animal, or person for the purpose of identification using radio waves. Chip-based RFID tags contain silicon chips and antennae. Passive tags require no internal power source, whereas active tags require a power source.
Types of RFID tags:
RFID cards are also known as "proximity", "proxy" or "contactless cards" and come in three general varieties: passive, semi-passive (also known as semi-active), or active.
Passive RFID tags have no internal power supply. The minute electrical current induced in the antenna by the incoming radio frequency signal provides just enough power for the CMOS integrated circuit in the tag to power up and transmit a response. Most passive tags signal by backscattering the carrier signal from the reader. This means that the antenna has to be designed to both collect power from the incoming signal and also to transmit
the outbound backscatter signal. The response of a passive RFID tag is not necessarily just an ID number; the tag chip can contain non-volatile EEPROM for storing data.
The lack of an onboard power supply means that the device can be quite small: commercially available products exist that can be embedded in a sticker, or under the skin in the case of low frequency RFID tags.
Non-silicon tags made from polymer semiconductors are currently being developed by several companies globally. Simple laboratory printed polymer tags operating at 13.56 MHz were demonstrated in 2005 by both PolyIC (Germany) and Philips (The Netherlands). If successfully commercialized, polymer tags will be roll printable, like a magazine, and much less expensive than silicon-based tags. The end game for most item level tagging over the next few decades may be that RFID tags will be wholly printed - the same way a barcode is today - and be virtually free, like a barcode. However, substantial technical and economic hurdles must be surmounted to accomplish such an end: hundreds of billions of dollars have been invested over the last three decades in silicon processing, resulting in a per-feature cost which is actually less than that of conventional printing.
Unlike passive RFID tags, active RFID tags have their own internal power source which is used to power any integrated circuits that generate the outgoing signal. Active tags are typically much more reliable (e.g. fewer errors) than passive tags due to the ability for active tags to conduct a "session" with a reader. Active tags, due to their onboard power supply, also transmit at higher power levels than passive tags, allowing them to be more effective in "RF challenged" environments like water (including humans/cattle, which are mostly water), metal (shipping containers, vehicles), or at longer distances. Many active tags have practical ranges of hundreds of meters, and a battery life of up to 10 years. Some active RFID tags include sensors such as temperature logging which have been used in concrete maturity monitoring or to monitor the temperature of perishable goods. Other sensors that have been married with active RFID include humidity, shock/vibration, light, radiation, temperature and atmospherics like ethylene. Active tags typically have much longer range (approximately 300 feet) and larger memories than passive tags, as well as the ability to store additional information sent by the transceiver. The United States Department of Defense has successfully used active tags to reduce logistics costs and improve supply chain visibility for more than 15 years. At present, the smallest active tags are about the size of a coin and sell for a few dollars.
RFID tags are being used in passports issued by many countries. The first RFID passports ("e-passports") were issued by Malaysia in 1998.Standards for RFID passports are determined by the International Civil Aviation Organization (ICAO), cover.
RFID tags are included in new UK and some new US passports, beginning in 2006. The US produced 10 million passports in 2005, and it has been estimated that 13 million will be produced in 2006. The chips will store the same information that is printed within the
passport and will also include a digital picture of the owner. The passports will incorporate a thin metal lining to make it more difficult for unauthorized readers to "skim" information when the passport is closed.
• Throughout Europe, and in particular in Paris in France (system started in 1995 by the (RATP)), Lyon and Marseille in France, Porto and Lisbon in Portugal, Milan and Torino in Italy, Brussels in Belgium, RFID passes conforming to the "Calypso" international standard are used for public transport systems. They are also used now in Canada (Montreal), Mexico, Israel, Pereira in Colombia, etc.
• The New York City Subway is conducting a trial during 2006, utilizing PayPass by MasterCard as fare payment.
• The Moscow Metro, the world's busiest, was the first system in Europe to introduce RFID smartcards in 1998.
• In the UK, op systems for prepaying for unlimited public transport have been devised, making use of RFID technology. The design is embedded in a creditcard-like pass, that when scanned reveals details of whether the pass is valid, and for how long the pass will remain valid. The first company to implement this is the NCT company of Nottingham City, where the general public affectionately refer to them as "beep cards". It has since then been implemented with great success in London, where "Oyster cards" allow for pay-as-you-go travel as well as passes valid for various lengths of time and in various areas.
• In Oslo, Norway, the upcoming public transport payment is to be entirely RFID-based. The system is to be put into production around spring 2007
• In Norway, all public toll roads are equipped with an RFID payment system known as AutoPass.
• Since 2002, in Taipei, Taiwan the transportation system uses RFID operated cards as fare collection.
• In Hong Kong, mass transit is paid for almost exclusively through the use of an RFID technology, called the Octopus Card. Originally it was launched in September 1997 exclusively for transit fare collection, but has grown to be similar to a cash card, and can be used in vending machines, fast-food restaurants and supermarkets. The card can be recharged with cash at add-value machines or in shops, and can be read several centimetres from the reader.
• RFID tags are used for electronic toll collection at toll booths with Georgia's Cruise Card The tags, which are usually the active type, are read remotely as vehicles pass through the booths, and tag information is used to debit the toll from a prepaid account. The system helps to speed traffic through toll plazas as it
records the date, time, and billing data for the RFID vehicle tag. The plaza- and queue-free 407 Express Toll Route, in the Greater Toronto Area, allows the use of a transponder (an active tag) for all billing. This eliminates the need to identify a vehicle by licence plate and saves the end user money.
An Electronic Road Pricing gantry in Singapore. Gantries such as these collect tolls in high-traffic areas from active RFID units in vehicles.
• In Singapore, public transport buses and trains employ passive RFID cards known as EZ-Link cards. Traffic into crowded downtown areas is regulated by variable tolls imposed using an active tagging system combined with the use of stored-value cards (known as CashCards).
• In Rio de Janeiro, "RioCard" passes can be used in buses, ferries, trains and subway. The cards cannot be recharged.
• A number of ski resorts, particularly in the French Alps, have adopted RFID tags to provide skiers hands-free access to ski lifts.
• The Canadian Cattle Identification Agency began using RFID tags as a replacement for barcode tags. The tags are required to identify a bovine's herd of origin and this is used for tracing when a packing plant condemns a carcass. Currently CCIA tags are used in Wisconsin and by US farmers on a voluntary basis. The USDA is currently developing its own program.
RFID tags used in libraries: square book tag, round CD/DVD tag and rectangular VHS tag.
• High-frequency RFID tags are used in library book or bookstore tracking, pallet tracking, building access control, airline baggage tracking, and apparel and pharmaceutical item tracking.
• UHF RFID tags are commonly used commercially in case, pallet, and shipping container tracking, and truck and trailer tracking in shipping yards.
• Microwave RFID tags are used in long range access control for vehicles.
• Since the 1990's RFID tags have been used in car keys. Without the correct RFID, the car will not start.
• In January 2003, Michelin began testing RFID transponders embedded into tires.
• Starting with the 2004 model year, a Smart Key/Smart Start option became available to the Toyota Prius. The key uses an active RFID circuit allowing the car to detect the key approximately 3 feet from the sensor. The driver can open the doors and start the car with the key in a purse or pocket.
Active In SP
Joined: Feb 2012
14-03-2012, 10:18 AM
to get information about the topic "Radio Frequency Identification" full report ppt and related topic refer the link bellow
Joined: Apr 2012
21-05-2012, 03:58 PM
Radio Frequency Identification (RFID)
RFID is an acronym for radio frequency identification. Briefly the RF stand for “radio-frequency” and ID means “identifier” that allows an item, for instance a library book, to be identified, accessed, stored, reprogrammed and communicated by using radio waves
It is the use of small devices that can be electronically identified at a distance, through many obstruction, using radio waves or adjoining frequencies.
RFID has been described as “tech’s official Next Big Thing”. RFID is not actually a new technology ,but it is being applied in a new way.Once used during world war 2 to identify friendly aircraft, RFID is now being used in a variety of public & private sector setting from hospital to the highway.
Works under adverse conditions
Reading is done without any human intervention
Read writer can be used to record new information on the tag
Types of RFID
How It Works
RFID is a generic term for technologies that use radio waves to automatically identify people or objects. There are several methods of identification, but the most common is to store a serial number that identifies a person or object, and perhaps other information, on a microchip that is attached to an antenna—the chip and the antenna together are called an RFID transponder or an RFID tag. The antenna enables the chip to transmit the identification information to a reader. The reader converts the radio waves reflected back from the RFID tag into digital information that can then be passed on to computers that can make use of it.
Joined: Apr 2012
16-07-2012, 04:18 PM
Radio Frequency Identification
RFID DOC.doc (Size: 182 KB / Downloads: 21)
In today’s world wireless technologies have become the key solution to every aspect
In the present supply chain management systems we use the barcode as an identifier for
an individual commodity. We track sales and purchases of the commodity by capturing its
barcode manually with the help of a barcode scanner. But the limitations of the present system
have led to the search for other more convenient and theft proof system which also requires
less manpower. This led to the invention of a system that tracks the commodity using
In the realm of wireless communications we have various existent technologies which are
Infra Red, Bluetooth, Radio Frequency, etc. Radio Frequency has been chosen over the other
two wireless technologies because of superiority in distance and line of sight
communication. Considering all these requirements, RFID technology, was invented.
WHAT IS RFID?
RFID is an area of automatic identification that has quietly been gaining momentum in recent
years and is now being seen as a radical means of enhancing data handling processes,
complimentary in many ways to other data capture technologies such bar coding. Technically
speaking, RFID is a system of small electronic tags (comprising a tiny chip plus an antenna)
that transmit a radio signal, radio signal readers and related hardware and software infrastructure.
These tags act as transponders (transmitters/responders), always listening for a radio
signal sent by transceivers, or RFID readers. The basic objective of the RFID system is to
carry information in these transponders or tags, and to retrieve the same information, as and
when required for application purposes by the readers.
Act as a carrier for return data from the tag.
RFID tags are categorized as either active or passive. Active RFID tags are powered by an internal battery and are typically read/write, i.e., tag data can be rewritten and/or modified. An active tag’s memory size varies according to application requirements; some systems operate with up to 1MB of memory.
Passive RFID tags operate without a separate external power source and obtain operating power generated from the reader. Passive tags are consequently much lighter than active tags, less expensive, and offer a virtually unlimited operational lifetime. The trade off is that they have shorter read ranges than active tags and require a higher-powered reader.
TRANSPONDERS OR TAGS
The device is basically a transmitter/responder. This essentially means that the tag responds
with the data it carries when it receives the transmission requesting the same from the
reader. The data communication within the system is through wireless means. The RFID tags
consist of low power integrated circuits. These tags need to transfer data and also generate
power for themselves. For this purpose they have to be either interfaced to external coils or
must utilize 'coil-on-chip' technology. The antenna is an important part of the transponder.
When the reader tries to retrieve information from the tag or tries to program the contents of
the tag, it sends appropriate radio signals. The antenna detects these signals and they also
come into play when the transponder responds to the request.
Memory requirements of transponder
The transponder generally consists of ROM, RAM and non-volatile programmable memory.
The Read Only Memory deals with memory requirements regarding power supply, data flow
and signal timings. The ROM stores the instructions and security information involved in
these operations. The Random Access Memory is used for data storage for short intervals of
time. Such cases arise when it responds to a request from a reader. The electrically erasable
programmable read-only memory or EEPROM is used to store the data associated with the tag.
The memory here is permanent since the data should be present under all conditions. Certain
data buffers are also maintained by the transponder. This is used during modulation and
demodulation of signals. This is required in the case of passive tags, which shall be discussed
later, to accommodate the field energy which is used to power the tags. Also when the tag is to
be programmed, the buffers provide the space required during demodulation of the incoming
Joined: Apr 2012
30-07-2012, 01:25 PM
Radio Frequency.ppt (Size: 1.17 MB / Downloads: 16)
Rfid-What is it?
Radio-frequency identification (RFID) is an automatic identification method, relying on storing and remotely retrieving data using devices called RFID tags or transponders.
RFID (radio frequency identification) is a technology that incorporates the use of electromagnetic or electrostatic coupling in the radio frequency (RF) portion of the electromagnetic spectrum to uniquely identify an object, animal, or person.
An alternative to bar code.
RFID is also called dedicated short range communication (DSRC).
History of RFID
Invented in 1948 by Harry Stockman.
Initial application was during World War II-The United Kingdom used RFID devices to distinguish returning English airplanes from inbound German ones. RADAR was only able to signal the presence of a plane, not the kind of plane it was..
Came into commercial use only in 1990s.
Components of RFID
An RFID tag is an object that can be stuck on or incorporated into a product, animal, or person for the purpose of identification using radio waves .
Tags ( Chip + Antenna + Substrate ).
-Write only .
-Frequency at which these tags are used
-Between 125 to 134 kilohertz.
-At 13.56 megahertz.
-Between 868 to 956 megahertz.
-At 2.45 gigahertz.
Passive RFID Tags
Tag contains an antenna, and a small chip
that stores a small amount of data
Tag can be programmed at manufacture
or on installation
Tag is powered by the high power electromagnetic field generated by the antennas – usually in doorways
The field allows the chip/antenna to reflect back an extremely weak signal containing the data.
Collision Detection – recognition of multiple tags in the read range – is employed to separately read the individual tags
Active RFID Tags
Battery Powered tags
Have much greater range – 100m
Hold much more information – Kbytes
Can integrate sensing technology
Can signal at defined time
Multiple tags can be recorded at once
Used for higher value items
Cost between $20 and $40 per item
Life between 2 – 4 years
Joined: Apr 2012
22-08-2012, 04:36 PM
RADIO FREQUENCY IDENTIFICATION
RADIO FREQUENCY.ppt (Size: 2.43 MB / Downloads: 15)
What is RFID?
Radio Frequency Identification
The ability to identify someone or something through the receipt of some kind of radio signal.
Assign IDs to objects
Link the ID to additional information about the object
Link the ID to complementary info
Find similar objects
Automatic identification and data capture refers to the methods of recognizing objects, getting information about them and entering the data or feeding it directly into the computer systems without any human involvement.
Radio frequency identification (RFID) is a generic term that is used to describe a system that transmits the identity (in the form of a unique serial number) of an object or person wirelessly, using radio waves. It's grouped under the broad category of automatic identification technologies.
History Of RFID…
First Bar code patents – 1930s
First use of RFID device – 2nd world war – Brittan used RFID-like technology for Identify- Friend or Foe
Harry Stockman October 1948 Paper – Communication by means of reflected power ( The proceedings of the Institute of Radio Engineers)
First RFID Patent - 1973
Auto-ID center founded at MIT – 1999
Standardization effort taken over by EPC Global (Electronic Product Code)
Current thrust primarily driven by Wal-Mart and DoD
Reduce cost (man power, shipping mistakes)
Increase sales (keep shelves full)
DoD Total Asset Visibility Initiative
Remotely power tags
Establish a bidirectional data link
Inventory tags, filter results
Communicate with networked server(s)
Can read 100-300 tags per second
Readers (interrogators) can be at a fixed point such as
Point of sale
Readers can also be mobile/hand-held