Turbo Codes
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Computer Science Clay
Active In SP

Posts: 712
Joined: Jan 2009
25-02-2009, 03:04 PM

Turbo Codes

Increasing demand for information exchange is a characteristic of modern civilisation. The transfer of information from the source to its destination has to be done in such a way that the quality of the received information should be as close as possible to the quality of the transmitted information.The information to be transmitted can be machine generated (e.g., images, computer data) or human generated (e.g., speech). Regardless of its source, the information must be translated into a set of signals optimized for the channel over which we want to send it.

The first step is to eliminate the redundant part in order to maximize the information transmission rate. This is achieved by the source encoder block in Figure 1-1. In order to ensure the secrecy of the transmitted information, an encryption scheme must be used. The data must also be protected against perturbations introduced by the communication channel which could lead to misinterpretation of the transmitted message at the receiving end. This protection can be achieved through error control strategies: forward error correction (FEC), i.e., using error correcting codes that are able to correct errors at the receiving end, or automatic repeat request (ARQ) systems.The modulator block generates a signal suitable for the transmission channel.

In the traditional approach, the demodulator block from Figure 1-1 makes a "hard" decision for the received symbol and passes it to the error control decoder block. This is equivalent, in the case of a two level modulation scheme, to decide which of two logical values, say -1 and +1, was transmitted. No information is passed on about how reliable the hard decision is. For example, when a +1 is output by the demodulator, it is impossible to say if it was received as a 0.2 or a 0.99 or a 1.56 value at the input to the demodulator block. Therefore, the information concerning the confidence into the demodulated output is lost in the case of a "hard" decision demodulator.The capacity of a channel, which was first introduced 50 years ago by Claude Shannon, is the theoretical maximum data rate that can be supported by the channel with vanishing error probability.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Huffman Codes pdf study tips 0 280 19-08-2013, 04:06 PM
Last Post: study tips
  The Bar Codes ( Download Full Seminar Report ) computer science crazy 7 6,265 27-07-2013, 10:56 AM
Last Post: Guest
  Codes, Correlations and Power Control in OFDM pdf study tips 0 340 05-03-2013, 01:00 PM
Last Post: study tips
  Number Systems, Data Types, Codes Logic Gates: An Introduction PPT study tips 0 470 16-02-2013, 10:44 AM
Last Post: study tips
  Number Systems, Data Types, Codes Logic Gates: An Introduction PPT study tips 0 468 16-02-2013, 10:43 AM
Last Post: study tips
  Cyclic redundancy check (CRC) codes pdf project girl 0 412 01-02-2013, 11:24 AM
Last Post: project girl
  Raptor Codes pdf project girl 0 281 19-01-2013, 11:27 AM
Last Post: project girl
  Viterbi Algorithm for Decoding of Convolutional Codes pdf project girl 0 324 28-12-2012, 04:40 PM
Last Post: project girl
  Space-Time Block Codes versus Space-Time Trellis Codes project girl 0 491 27-12-2012, 02:22 PM
Last Post: project girl
  Linear Block Codes ppt project girl 0 384 20-12-2012, 06:26 PM
Last Post: project girl