Universal Asynchronous Receiver Transmitter
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator

Posts: 3,048
Joined: Dec 2008
21-09-2008, 11:22 AM


The Universal Asynchronous Receiver Transmitter (UART) is the most widely used serial data communication circuit ever. UARTs allow full duplex communication over serial communication links as RS232. UARTs are available as inexpensive standard products from many semiconductor suppliers, making it unlikely that this specific design is useful by itself.

The basic functions of a UART are a microprocessor interface, double buffering of transmitter data, frame generation, parity generation, parallel to serial conversion, double buffering of receiver data, parity checking, serial to parallel conversion. The data is transmitted asynchronously one bit at a time and there is no clock line.
The frame format of used by UARTs is a low start bit, 5-8 data bits, optional parity bit, and 1 or 2 stop bits. Universal Asynchronous Receive/Transmit consists of baud rate generator, transmitter and receiver. The number of bits transmitted per second is called baud rate and the baud rate generator generates the transmitter and receiver clocks separately. UART synchronizes the incoming bit stream with the local clock.

Transmitter interfaces to the data bus with the transmitter data register empty (TDRE) and write signals. When transmitting, UART takes eight bits of parallel data and converts it into serial bit stream and transmit them serially.
Receiver interfaces to the data bus with the receiver ready and the read signals. When UART detects the start bit, it receives the data serially and converts it into parallel form and when stop bit (logic high) is detected, data is recognized as a valid data.

UART Transmitter

The UART transmitter mainly consists of two eight bit registers the Transmit Data Register (TDR) and Transmit Shift Register (TSR) along with the Transmitter Control. The transmitter control generates the TDRE and TSRE signals which controls the data transmission through the UART transmitter. The write operation into the TDR is based on the signals generated from the microprocessor.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  The RX433 (Receiver Module) seminar projects maker 0 229 23-09-2013, 04:46 PM
Last Post: seminar projects maker
  RF TRANSMITTER MODULE seminar projects maker 0 388 23-09-2013, 04:45 PM
Last Post: seminar projects maker
  Applications of The MT8870 Integrated DTMF Receiver pdf study tips 0 436 21-08-2013, 04:46 PM
Last Post: study tips
  Addressable Universal Synchronous Asynchronous Receiver study tips 0 281 17-07-2013, 02:53 PM
Last Post: study tips
  Receiver & Transmitter Architectures study tips 0 335 14-06-2013, 12:19 PM
Last Post: study tips
  USB - Universal Serial Bus ppt study tips 1 370 08-06-2013, 11:35 AM
Last Post: study tips
  LOW POWER TV TRANSMITTER ppt study tips 0 411 04-06-2013, 02:58 PM
Last Post: study tips
  A Road to Universal Broadband Connectivity study tips 0 258 22-05-2013, 12:26 PM
Last Post: study tips
  UNIVERSAL SHIFT REGISTER (IC 74194) study tips 0 773 10-04-2013, 03:29 PM
Last Post: study tips
  An Approach For Designing A Universal Asynchronous Receiver Transmitter (UART) pdf study tips 0 481 19-02-2013, 03:23 PM
Last Post: study tips