Wavelength Division Multiplexing (WDM)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
computer science crazy
Super Moderator
******

Posts: 3,048
Joined: Dec 2008
#1
21-09-2008, 11:24 AM


In a WDM system, each of the wavelengths is launched into the fiber, and the signals are demultiplexed at the receiving end. Like TDM, the resulting capacity is an aggregate of the input signals, but WDM carries each input signal independently of the others. This means that each channel has its own dedicated bandwidth; all signals arrive at the same time, rather than being broken up and carried in time slots. The difference between WDM and dense wavelength division multiplexing (DWDM) is fundamentally than does WDM, and therefore has a greater overall capacity.The limits of this spacing are not precisely known, and have probably not been reached, though systems are available in mid-year 2000 with a capacity of 128 lambdas on one fiber.These include the ability to amplify all the wavelengths at once without first converting them to electrical signals, and the ability to carry signals of different speeds and types simultaneously and transparently over the fiber (protocol and bit rate independence).

WDM increases the carrying capacity of the physical medium (fiber) using a completely different method from TDM. WDM assigns incoming optical signals to specific frequencies of light (wavelengths, or lambdas) within a certain frequency band. This multiplexing closely resembles the way radio stations broadcast on different wavelengths without interfering with each other (see Figure 1-7). Because each channel is transmitted at a different frequency, we can select from them using a tuner. Another way to think about WDM is that each channel is a different color of light; several channels thenmake up a "rainbow."

DWDM mesh networks, consisting of interconnected all-optical nodes, will require the next generation of protection. Where previous protection schemes relied upon redundancy at the system, card, or fiber level, redundancy will now migrate to the wavelength level. This means, among other things, that a data channel might change wavelengths as it makes its way through the network, due either to routing or to a switch in wavelength because of a fault. The situation is analogous to that of a virtual circuit through an ATM cloud, which can experience changes in its virtual path identifier (VPI)/virtual channel identifier (VCI) values at switching points. In optical networks, this concept is sometimes called a light path.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
smart paper boy
Active In SP
**

Posts: 2,053
Joined: Jun 2011
#2
24-08-2011, 10:54 AM


.ppt   Opto lab presentation1.ppt (Size: 1.43 MB / Downloads: 55)
Motivation
With ever increasing number of users there is constant demand for ultra high speed data rates with improved bandwidth capacity. i.e. high bandwidth capacity of transmission link.
More fibers
Fast electronics
WDM
Wavelength Division Multiplexing(WDM)
Simultaneous transmission of several independent signals using wave transmission.
Each colour of light (wavelength) carries separate data channel
Increase in overall capacity of transmission
WDM Operation
Multiplexer aggregates sources for transmission over single fibre.
Optical amplifiers amplify all wavelengths.
Demultiplexer separates channels at the destination The
photo detector corresponding t o each wavelength detects the desired transmitted signal.
Mostly 1550nm range transmission window is used.
WDM History
64-128 channels in 1550 nm window. Channel spacing
0.4-0.8nm
16-32 channels in 1550 nm.
channel spacing 0.8-1.6nm
2-8 channel in 1550 nm.
Channel spacing ~3.2nm
2 channel WWDM(Wideband WDM) 1310nm and 1550 nm
WDM Evolution
Faster(high speed per channel)
Channel are narrower and very close to each other i.e. increased no. of channels.
Longer individual links before regeneration.
WDM Evolution (contd.)
WDM(contd..)
Optical Fiber Performance
Optimum performance is hampered by
Attenuation
loss or reduction in signal power during transmission.
Dispersion
broadening of pulses as they travel over the fiber.
Remedy: a)dispersive shifted fiber(DSF) 4 wave mixing
b) Non zero dispersive shifted fiber(NSDSF)
Reply
Guest
Thinking To Register

 
#3
06-03-2013, 06:59 PM

good seminar and presentation topics n reports.........................................................
Reply
study tips
Super Moderator
******

Posts: 10,180
Joined: Feb 2013
#4
07-03-2013, 10:37 AM

To get full information or details of Wavelength Division Multiplexing (WDM) please have a look on the pages

topicideashow-to-dense-wavelength-division-multiplexing-download-full-seminar and presentation-report

topicideashow-to-dense-wavelength-division-multiplexing-ppt--81753

if you again feel trouble on Wavelength Division Multiplexing (WDM) please reply in that page and ask specific fields in Wavelength Division Multiplexing (WDM)
Reply
krishna chaitanya prasad
Active In SP
**

Posts: 1
Joined: Mar 2013
#5
07-03-2013, 11:10 AM

HAI...!I WAS ALSO INTRESTED IN COMPUTRT SCIENCE,..ACTUALLY I'M CHAITANYA ENGG 1ST YR STUDENT AND I WANT UR HELP TO SHINE IN FIELD OF CSE..PLEASE HELP ME...PLEASE..!


Attached Files
.gif   69_jing_jang.gif (Size: 46.54 KB / Downloads: 15)
Reply
study tips
Super Moderator
******

Posts: 10,180
Joined: Feb 2013
#6
08-03-2013, 11:45 AM

To get full information or details of Wavelength Division Multiplexing (WDM) please have a look on the pages

topicideashow-to-dense-wavelength-division-multiplexing-download-full-seminar and presentation-report

topicideashow-to-dense-wavelength-division-multiplexing-download-full-seminar and presentation-reportpid=124191#pid124191

if you again feel trouble on Wavelength Division Multiplexing (WDM) please reply in that page and ask specific fields in Wavelength Division Multiplexing (WDM)
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Orthogonal frequency-division multiplexing ppt seminar projects maker 0 408 25-09-2013, 12:59 PM
Last Post: seminar projects maker
  Code Division Multiple Access (CDMA) pdf seminar projects maker 0 314 13-09-2013, 02:12 PM
Last Post: seminar projects maker
  DIVISION OF TWO 8 – BIT NUMBERS study tips 0 350 03-08-2013, 02:51 PM
Last Post: study tips
  DIVISION OF TWO 8 BIT NUMBERS study tips 0 323 03-08-2013, 02:29 PM
Last Post: study tips
  3 dB POWER DIVISION AND ISOLATION CHARACTERISTICS study tips 0 384 20-07-2013, 02:53 PM
Last Post: study tips
  Measurement of frequency, guide wavelength, power, VSWR, attenuation in a microwave study tips 0 465 20-07-2013, 02:47 PM
Last Post: study tips
  TIME DIVISION MULTIPLEXING study tips 0 430 20-07-2013, 02:46 PM
Last Post: study tips
  PCM Principles, Multiplexing & Signaling Report study tips 0 371 10-06-2013, 12:44 PM
Last Post: study tips
  Optical code-division multiple-access (O-CDMA) Report study tips 0 394 30-05-2013, 12:12 PM
Last Post: study tips
  Multiplexing study tips 0 478 26-02-2013, 04:53 PM
Last Post: study tips