automated information system using rf in train
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Active In SP

Posts: 2
Joined: Feb 2010
15-02-2010, 10:40 AM

Active In SP

Posts: 261
Joined: Feb 2010
15-02-2010, 05:18 PM

Train information and control system based on RFID
PRINCIPLE OF Track Circuit Train Control (TCTC):
The system transfers control information through railway track. Each track circuit is a close division with certain length. Sender and receiver are located in the start and end of the division.The value of the track circuit resistance, is crucial because it will influence the value of current transferred to the control center. If the current is weak, the position will not be indicated at the moment.

RFL(Radio frequency identification location system)

It consists of RF-card, Read/Write device and management system. The Read/Write devices consist of wireless transceiver, antenna,
controlling module and interface circuit . The RF-card can read or write intelligently within encrypted communication. RFL systems are classified as low frequency, intermediate frequency and high
frequency.The high frequency system works at 850- 950MHz or 2.4-5 GHz for long distance or high rate of reading/writing data. The low frequency system refers to 100- 500kHz and intermediate frequency system is about between 10-15 MHz. and are mainly used in short distance or low cost application.

It is is an advanced control system using wireless communication. Itâ„¢s a flexible and safe new generation of train control system with strong functions. there are 5 parts in CBTC: MSC( mobile switch center), BSC(base switch controller), BTS(base transfer station), MS(mobile station) and CL(connection line).

When train is running on the railway, the RF-read/write device will read the data from the RF-card and is displayed to the train driver and transferred to control center through the CBTC and thus the trainâ„¢s position is located.When the train runs between two RF-cards, the location could be calculate by formula:
Location= Mileage(data from just passing RF-card)+Speed*Time .

full report:

.pdf   RFID train control information system.pdf (Size: 112.06 KB / Downloads: 70)

Also visit this link for more details:
Use Search at wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Hospital Management System (Billing system, clinical system, EMS) kielmaru 1 621 01-04-2016, 11:52 AM
Last Post: mkaasees
  source code for home automation ac dc using tv remote using AT89S52 microcontroller Guest 5 2,302 29-08-2015, 03:40 PM
Last Post: mkaasees
  stock maintenance system in ooad using vb Guest 2 3,123 28-01-2015, 02:26 PM
Last Post: Guest
  A wireless design of low-cost irrigation system using Zigbee technology vishnu447 5 3,465 20-07-2014, 04:40 PM
Last Post: maggihallows
  compressed air production using vehicle suspension system Guest 5 2,460 09-05-2014, 06:14 PM
Last Post: Guest
Last Post: seminar project topic
  information of carrier guide center Guest 1 351 07-11-2013, 08:37 AM
Last Post: Guest
  Vehicle Tracking System using GPS Guest 1 534 18-09-2013, 10:15 AM
Last Post: seminar projects maker
Information train information system Guest 1 299 02-09-2013, 09:43 AM
Last Post: study tips
  online vehicle registration system using html Guest 1 378 20-08-2013, 09:24 AM
Last Post: study tips