fabrication of multi nut(wheel) tighter
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
suresh kumar
Active In SP

Posts: 1
Joined: Dec 2009
13-12-2009, 06:14 PM

i need a idea for do the project and implimentation fabrication of multi nut(wheel) tighter

Posts: 213
Joined: Dec 2009
14-12-2009, 06:30 PM

Title: Device for loosening or screwing tight the fixing bolts of a wheel of a motor vehicle, with direct coupling to the wheel.
A Device for loosening/screwing tight the fixing bolts of a wheel of a vehicle, which is directly coupled to the wheel, comprising a housing in the form of a parallelepiped, a socket wrench and a sleeve fixed at the end of an adjustable arm. Here, the socket wrench engages a fixing bolt of the wheel to be screwed, the sleeve guaranteeing the stability of the housing of the device during the loosening or tightening of the above mentioned bolt, by engaging another fixing bolt of the wheel. The housing contains a reduction gear assembly letting to loosen tighten the bolt, by rotating a crank with minimal effort.

In earlier instruments, comprise a reduction gear, an actuating shaft connected to a crank, and an output shaft for engaging the head of the bolt to be screwed using a socket wrench.The tool must be supported to ground and the length of the arm must be adjustable, if the motor vehicle has already been lifted.

In order to remove a wheel, the device is put near the tire rim, engaging the socket wrench with the head of the bolt to be screwed, and at the same time, the bush is plugged into another fixing bolt which has already been loosened subsequently, after the length adjustment of that part of the arm 4, which project and implimentations out of the upper part of the device. The crank will be now rotated, in order to loosen or tighten the bolt with less effort, due to the elevated reduction ratio of the reduction gear assembly.

more details can be found here:
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  project for fabrication of domestic hydro power plant for houses Guest 1 102 31-10-2016, 03:32 PM
Last Post: jaseela123
  multi touch interaction seminar ppt free download kurkutiya Ravi 1 96 31-10-2016, 02:56 PM
Last Post: Dhanabhagya
  multi touch interaction seminar ppt free download kurkutiya Ravi 1 88 31-10-2016, 02:25 PM
Last Post: amrutha735
  pdf fabrication of mini steam generator boiler for cooking and bathing with abstract Guest 1 124 31-10-2016, 02:15 PM
Last Post: Dhanabhagya
  mechanical project for fabrication of lube oil cooler pdf Guest 1 80 31-10-2016, 12:15 PM
Last Post: jaseela123
  fabrication of tilting and swivel vice explanation in pdf Guest 1 113 31-10-2016, 11:52 AM
Last Post: jaseela123
  fabrication of dual side water pump system diploma project Guest 1 73 31-10-2016, 11:31 AM
Last Post: amrutha735
  design and fabrication of accident preventing system in cutting machine Guest 1 81 31-10-2016, 10:39 AM
Last Post: ijasti
  mmic fabrication ppt Guest 1 68 31-10-2016, 09:44 AM
Last Post: anusree
  design fabrication of hydraulic cylinder liner puller pdf Guest 1 89 29-10-2016, 04:29 PM
Last Post: jaseela123