fault detection in VLSI circuit
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
thewise_thinker
Active In SP
**

Posts: 1
Joined: Feb 2010
#1
15-02-2010, 02:34 PM


fault detection in VLSI circuit
Reply
seminarbuddy
Active In SP
**

Posts: 261
Joined: Feb 2010
#2
15-02-2010, 06:05 PM

Test-Generation-Based Fault Detection in
Analog VLSI Circuits Using Neural Networks

Here, a novel test methodology for
the detection of catastrophic and parametric faults present
in analog very large scale integration circuits is described.

Introduction:
Testing of analog very large scale integration (VLSI) circuits is a challenge in itself. The high analog test cost results from many factors, such as

expensive test equipment, long test development time, and long

test production time.An effective test methodology is a
very important issue in the production of an IC and has direct
consequences on the price and the quality of the final product.


Faults in Analog Circuits:
Faults present in ICs can be divided into three classes:

1)permanent faults, which are faults in existence long enough to

be observed at test time;
2) temporary fault, which appear and disappear in short intervals of

time;
3) delay faults, which affect the operating speed of the
circuit.

Test pattern Generation.
The test pattern generator

must find an optimal set of test stimuli which detects all

modeled faults in the VLSI circuit. Thus the problem of test signal generation is

an optimization problem in principle. artificial intelligence methods have gained

much attention for Test vector generation
. Genetic algorithms have proven to be

effective in VLSI applications, including circuit layout and

partitioning, cell placement, routing, and automatic test

generation. a genetic algorithm is used as a test pattern

generatorto generate a piece-wise linear (PWL)

stimulus.

PWL Signal Generation:
all faults can be made visible in the measurement space By exciting the CUT with pulses and ramps whose
frequency spectrum stretches over a wide range of frequencies,
a transient PWL signal is generated for detection of both
catastrophic and parametric faults present in the circuits.


Feature Extraction Using Wavelets
Wavelet transform (WT) is capable of providing the time and
frequency resolution simultaneously and hence giving time-
frequency representation of the signal.
The output voltage response of the signal is captured and is
sampled with the sampling frequency of 5f, where f is the basic
frequency of the signal. When this signal passes through the
filter bank, the multiresolution decomposition of the signal
takes place.

Proposed Fault Detection Method Using PWL
Signal
Fault Detection Using Neural Networks:
Artificial intelligence techniques are popularly used in many
VLSI problems. In many studies neural networks are used in
fault detection and classification problems
a probabilistic neural
network (PNN) is used for the detection of catastrophic faults,
but AC current, AC voltage, DC current, and DC voltage are
the four measurements used for training the neural network.
a back propagation neural (BPN) net and a self organizing map
are used for fault classification

Full report:
etrij.etri.re.kr/Cyber/servlet/GetFile?fileid=SPF-1239174834502
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  matlab code for copy move image forgery detection using dct Guest 1 119 03-01-2017, 06:16 PM
Last Post: Bobby6
  literature survey on project fire detection and monitoring system for railways Guest 1 99 31-10-2016, 02:51 PM
Last Post: jaseela123
  nuclear radiation detection and tracking Guest 2 96 31-10-2016, 12:12 PM
Last Post: amrutha735
  circuit diagram of fm receiver using 28 pin ic cxa1619bs Guest 1 88 31-10-2016, 12:11 PM
Last Post: jaseela123
  explanation of the circuit for a speech amplifier in a walkie talkie Guest 1 126 31-10-2016, 11:26 AM
Last Post: anusree
  logical fault location methods in maintenance engineering Guest 1 132 31-10-2016, 11:22 AM
Last Post: jaseela123
  lhb coach circuit diagram Guest 1 67 31-10-2016, 11:19 AM
Last Post: jaseela123
  pdf project electronic circuit diagram of an automatic dustbin Guest 2 123 31-10-2016, 10:48 AM
Last Post: anusree
  circuit diagram for remote control bomb blast Guest 1 109 31-10-2016, 10:45 AM
Last Post: amrutha735
  suspicious e mail detection code Guest 1 96 31-10-2016, 10:16 AM
Last Post: anusree