liquid level Alarm
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
electronics seminars
Active In SP
**

Posts: 694
Joined: Nov 2009
#1
09-01-2010, 06:01 PM


[attachment=1133]
liquid level Alarm
Here is a simple circuit for Liquid level alarm. It is built Around two BC547 transistors(T1 and T2) and two timer 555 ICs (IC1and IC2). Both IC1 and IC2 are wired in astable multivibrator mode. TimerIC1 produces low frequency, while timer IC2 produces high frequency. As a result, a beeping tone is generated when the liquid tank is full. Initially, when the tank is empty, transistor T1 does not conduct. Consequently, transistor T2 conducts and pin 4 of IC1 is low. This low voltage disables IC1 and it does not oscillate. The low output of IC1 disables IC2and it does not oscillate. As a result, no sound is heard from the speaker. But when the tank gets filled up, transistor T1 conducts. Consequently, transistor T2 is cut off and pin 4 ofIC1 becomes high. This high voltage enables IC1 and it oscillates to produce low frequencies at pin 3. This low-frequency output enables IC2 and it also oscillates to produce high frequencies. As a result, sound is produced from the speaker. Using preset VR1 you can control the volume of the sound from the speaker. The circuit can be powered from a9V battery or from mains by using a 9Vpower adaptor. Assemble the circuit on a general purpose PCB and enclose in a suitable cabinet. Install two water-level probes using metal strips such that one touches the bottom of the tank and the other touches the maximum level of the water in the tank. Interconnect the sensor and the circuit using a flexible wire.
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  MULTI-LEVEL INVERTER CAPABLE OF POWER FACTOR CONTROL WITH DC LINK SWITCHES PPT study tips 2 625 06-09-2016, 10:04 AM
Last Post: Dhanabhagya
  WIRELESS BASED RAILWAY BRIDGE DAMAGE & TRACK FAULT NOTIFICATION WITH ALARM SYSTEMS project girl 2 2,624 08-03-2014, 02:56 PM
Last Post: seminar project topic
  SOUND LEVEL METER WITH AUDIO ANNOUNCEMENT FOR LIBRARY ppt seminar flower 7 3,720 08-03-2014, 02:33 PM
Last Post: seminar project topic
  Report on Water Level Indicator with alarm seminar projects maker 0 457 25-09-2013, 02:19 PM
Last Post: seminar projects maker
  A PROJECT REPORT ON SOUND LEVEL METER WITH AUDIO ANNOUNCEMENT FOR LIBRARY study tips 1 1,390 24-09-2013, 01:02 PM
Last Post: aamirzz
  Report on Water level controller cum motor protector seminar projects maker 0 371 21-09-2013, 04:48 PM
Last Post: seminar projects maker
  FULL REPORT ON GPS&GSM BASED ACCIDENT ALARM SYSTEM seminar projects maker 0 476 12-09-2013, 04:13 PM
Last Post: seminar projects maker
  AUTOMATIC NIGHT LAMP WITH MORNING ALARM seminar class 20 14,251 12-09-2013, 09:47 AM
Last Post: seminar projects maker
  SINGLE PHASE SINGLE-STAGE THREE LEVEL POWER FACTOR CORRECTION AC-DC CONVERTER REPORT study tips 0 434 02-09-2013, 04:04 PM
Last Post: study tips
  DESIGN AND CONSTRUCTION OF BURGLAR ALARM SYSTEM project uploader 5 3,726 24-08-2013, 09:42 AM
Last Post: study tips