reduction of noise in gear box
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Active In SP

Posts: 1
Joined: Sep 2010
26-09-2010, 08:23 PM

types of gear box and how to reduce the noises in them
Active In SP

Posts: 126
Joined: Sep 2010
30-09-2010, 08:17 PM

Manufacturing plants and other work environments can be noisy.Multiutde of gears running in unison can cause a lot of noise. The pumps, motors, conveyers, compressors, and fans,
are all potential sources of noise. about 90 decibels of noise is produced when one stands only ten feet from a standard double-reduction speed reducer.
The gearbox noise could be caused by different reasons:
A speed reducer can be taken as an example. The gears, bearings, shafts, cooling devices and lubrication, even its housing starts to vibrate when the reducer operates. pressure pulsations in the surrounding air produced due to this vibration is detected as the noise by human ear. excessively noisy vibrations results when many such devices operates in sync. most noise within a

gearbox emanates from vibration generated by gear mesh action. The level of noise is dependent on :
- Gear tooth geometry.
-Finished gear tooth surface

transmission load and motor speed are also factors influencing the level of noise. Sometimes switching from spur type gearing to a helical gearing may reduce the noise problem significantly.

For more details, visit :
Use Search at wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion

Important Note..!

If you are not satisfied with above reply ,..Please


So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  automatic gear changing mechanism Guest 0 313 16-02-2013, 12:53 PM
Last Post: Guest
  image blur reduction usingadaptive tonal correction Guest 0 390 11-01-2013, 10:04 AM
Last Post: Guest
  Color Image restoration from high concentration impulse noise Guest 0 682 14-11-2012, 08:55 PM
Last Post: Guest
  design an implementation of mechanism for standby power reduction in home appliances Guest 1 788 31-10-2012, 11:24 AM
Last Post: seminar tips
  GEAR CONTROL IN VEHICLES USING GESTURES Guest 0 428 29-09-2012, 01:37 PM
Last Post: Guest
  button based gear shifting mechanism Guest 1 937 26-07-2012, 10:35 AM
Last Post: Guest
  RFID and GSM based intelligent mail box Guest 0 737 19-07-2012, 02:17 PM
Last Post: Guest
  GEAR TEST RIG sammymalviya 0 381 05-12-2011, 04:14 PM
Last Post: sammymalviya
  WIRELESS MICROCONTROLLER BASED BLACK BOX FOR CAR dileepshetty 2 1,223 29-08-2011, 09:41 AM
Last Post: seminar addict
  direct shift gear box(DSG) albin ss 0 1,169 26-07-2011, 09:39 PM
Last Post: albin ss