spy robot report
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
akashpandey007
Active In SP
**

Posts: 1
Joined: Apr 2010
#1
23-04-2010, 10:59 PM


pls give me the projet report of spy robot or Radio Frequency based remote controlled robot with wireless video camera mounted on it.
Reply
reports-crawler
Active In SP
**

Posts: 291
Joined: Apr 2010
#2
29-04-2010, 11:49 PM

Hi,
visit this thread for full details and a full report on this topic:
topicideashow-to-rf-based-spy-robot-full-report
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
supriyakare@gmail.com
Active In SP
**

Posts: 1
Joined: Oct 2010
#3
06-10-2010, 08:56 PM

sir plz i want some more details on spy robot using rf module.......
sir will u plz send me d details...
Reply
deepu.20
Active In SP
**

Posts: 1
Joined: Oct 2010
#4
06-10-2010, 09:13 PM

pls give me the projet report of spy robot or RF based remote controlled robot with wireless video camera mounted on it.

Reply
kundanbonde
Active In SP
**

Posts: 1
Joined: Sep 2010
#5
06-10-2010, 11:36 PM

thanks....
Reply
project report helper
Active In SP
**

Posts: 2,270
Joined: Sep 2010
#6
29-10-2010, 05:56 PM


.doc   spy robot synopsis [EDocFind[1].com].doc (Size: 46.5 KB / Downloads: 274)
[b] SPY ROBOT

WORKING PRINCIPLE:[/b]

The main devices of this project and implimentation are micro controller, wireless video camera, RF data transmitter and RF data receiver and a computer or a laptop, also a mechanical vehicle.

Wireless video camera is fixed in this robot and also a micro controller with a RF data receiver and the motor driver chip L293d is also connected.

The RF data receiver is standard 433mhz type receiver and it can support 4-bit data type. This has a signal very good sensitivity and used a Holtek decoder chip 12d which has totally 12 address and 4 bit data (that is totally 16 combinations of data).

This 4 bit combinations are used to control the movement of the robot and also the other movement.
Reply
raveenamotiwala
Active In SP
**

Posts: 1
Joined: Jul 2011
#7
21-09-2011, 06:21 PM

Pls send me the seminar and presentation report on spy robot...
Reply
seminar addict
Super Moderator
******

Posts: 6,592
Joined: Jul 2011
#8
22-09-2011, 09:24 AM


To get more information about the topic "spy robot report " please refer the link below
topicideashow-to-spy-robot-report?pid=56768#pid56768
Reply
pavanpanja
Active In SP
**

Posts: 5
Joined: Dec 2011
#9
26-12-2011, 03:00 PM

plssend me ppt fr spy robots
Reply
seminar addict
Super Moderator
******

Posts: 6,592
Joined: Jul 2011
#10
27-12-2011, 10:00 AM

To get more information about the topic "spy robot report " please refer the link below
topicideashow-to-spy-robot-report?pid=56768#pid56768
Reply
seminar paper
Active In SP
**

Posts: 6,455
Joined: Feb 2012
#11
06-03-2012, 04:03 PM

spy robot report


.doc   Final_ReportLin.doc (Size: 1.91 MB / Downloads: 193)

Abstract
Explorer robot is a robot can be used to explore limited space and transmit live video through wireless RF channel to remote workstation, the goal of spy robot is to search interesting stuff from where people are not able to reach.
Explorer can avoid collision through its advanced sensor system. It can reach specific location thorugh its wheel encoder and return to its home.

I. Executive Summary
The SPY robot includes 1 wireless RF channel video camera, 4 IR emitters and detectos, 2 shaft encoders and 1 photocell. While in task execution, robot will transmit video through RF channel to remote site to show the live image that robot sees at that time. When an obstacle is detected by robot, it will try to avoid it by change its direction.
In the beginning, user must enter location to robot. The location is presented by coordinate like (x,y) in feet. The real world coordinate is then transferred to internal coordinate in X direction and Y direction. Initially, robot thinks its current location as (0,0), when left wheel rotates, shaft encoder will begin to count. Each time robot makes a turn, internal coordinate will rotate too. When internal location has reached, robot think itself has reached its destination in real world then it will begin returning to base.
In the road to detination, when an obstacle is detected, robot will try to avoid collision by changing direction. It will first backward then turn 90 degree clockwise then continue its journey.



II. Introduction

Sometimes we drop small things like diamond rings, pens or valuable stuff under hidden places like under bed, under table or places that we can not reach. If we can have some mechanism that can show us where’s the lost stuff would helps a lot. That’s why I proposed this SPY robot that can explore certain places that human couldn’t reach.

SPY is a robot that is very tiny (about 5 in cube) and capable of navigating some specific places. It will explore toward pointed direction, avoid obstacles and transmit images that it “sees”. When the specified location is reached, it will return to its home. While it is exploring, it will transmit live video through its wireless (RF) video camera to home base. If the place that user assigned is in low light condition, robot will turn on its light in order to capture images.



III. Platform design
Since SPY is designed for exploring limited places like very narrow places or height limited places. It is will be more appropriate to make it as small as possible. I did not choose it to as small as 1-inch cube size because it will increase design difficulty and because this is a prototype, the size of some parts probably not small enough, so the whole platform size is around 5-inch cube.



IV. Actuator Design

The actuation that will be used in this project and implimentation are tow hacked servos. Hacked servo is connected with driven wheel, it can forward and backward according to code used. Two wheels are being used as driven wheel.

V. Sensors Design

Sensors that will be used in this project and implimentation are: 4 IR sensors, two wheel encoders, 4 micro-switches, one photoresistor and one sonar.

IR sensors are used for sense possible obstacles. Wheel encoders are used to record how many “steps” has passed in a given time at each wheel. And micro-switches are used for bumper. Photoresistor is used for sense environment light condition, if it is in low light condition, robot will turn on its own light to help camera capture images.


Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  MICROCONTROLLER BASED PICK AND PLACE ROBOT projectsofme 10 9,434 21-02-2015, 03:56 AM
Last Post: nalzanbagi
  humanoid robot seminar report jaseelati 0 240 30-12-2014, 01:32 PM
Last Post: jaseelati
  Robot Assisted Emergency Search and Rescue System With a Wireless Sensor Network pdf study tips 0 620 23-08-2013, 03:22 PM
Last Post: study tips
  BOMB DETECTION ROBOT seminar flower 5 4,910 19-07-2013, 07:18 PM
Last Post: Guest
  Full Report on Humanoid Robot study tips 0 340 21-06-2013, 02:14 PM
Last Post: study tips
  REPORT ON WIRELESS RESCUE ROBOT study tips 0 294 18-06-2013, 02:53 PM
Last Post: study tips
  DTMF Controlled Robot pdf study tips 0 365 03-06-2013, 02:30 PM
Last Post: study tips
  A Multipurpose Robot for Military Report study tips 0 556 18-04-2013, 03:05 PM
Last Post: study tips
  HAZARDOUS GAS DETECTING METHOD APPLIED IN COAL MINE DETECTION ROBOT seminar ideas 1 924 22-02-2013, 04:27 PM
Last Post: study tips
  Light Following Robot Report project girl 0 326 31-01-2013, 02:25 PM
Last Post: project girl