turbocharger design
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
libinbabu
Active In SP
**

Posts: 1
Joined: May 2010
#1
26-05-2010, 03:15 PM


i am libin.I want to present a seminar and presentation presentation in my college.need all details about turbocharger. mainly concentrates on design of turbocharger
Reply
Sidewinder
Active In SP
**

Posts: 171
Joined: May 2010
#2
30-05-2010, 10:36 PM

Components:
The turbocharger has four main components. The turbine (almost always a radial turbine) and impeller/compressor wheels are each contained within their own folded conical housing. They are on the opposite sides of a center housing/hub rotating assembly (CHRA). The housings fitted around the compressor impeller and turbine collect and direct the gas flow through the wheels as they spin. Twin-scroll designs have two valve-operated exhaust gas inlets, a smaller sharper angled one for quick response and a larger less angled one for peak performance.
the amount of air or exhaust that can be flowed through the system is dictated. Details like the curvature and number of blades on the wheels, Measurements and shapes etc can vary.
The center hub rotating assembly (CHRA) houses the shaft which connects the compressor impeller and turbine. This component has a bearing system to suspend the shaft, allowing it to rotate at very high speed with minimal friction. In the case of automotive uses, CHRA typically uses a thrust bearing or ball bearing lubricated by pressurised engine oil.

for more details and design, see:
en.wikipediawiki/Turbochargers#Design_and_installation
experiencefestivala/turbocharger%20-%20design%20details/id/5547445
Use Search at http://topicideas.net/search.php wisely To Get Information About Project Topic and Seminar ideas with report/source code along pdf and ppt presenaion
Reply
seminar surveyer
Active In SP
**

Posts: 3,541
Joined: Sep 2010
#3
06-10-2010, 01:29 PM



.pdf   Turbo Charger_Anuj Vats.pdf (Size: 737.97 KB / Downloads: 293)


Introduction

-History

-1970’s –first oil crisis and increasingly stringent air emission regulations lead to demands for higher power density as well as higher air delivery. Outcome -> virtually all current truck engines are turbocharged.

-1978 Mercedes-Benz puts the 300 SD into production marking the appearance of the first turbocharged Diesel passenger car.

-1994 VW introduces the variable geometry turbo in their TDI Diesel engine significantly improving the transient response of the Diesel engine. Av
Reply
project report helper
Active In SP
**

Posts: 2,270
Joined: Sep 2010
#4
02-11-2010, 11:40 AM


.rar   ABSTRACT TURBOCHARGER.rar (Size: 8.13 KB / Downloads: 91)
turbocharger design


ABSTRACT

In these days of technological advancements in Automobile sector where mans penchant is to develop technologies that can improve the power and mileage of the vehicle TURBOCHARGER is one such exotic gadget.
Any engine needs air for combustion of fuel and it is the Air-Fuel ratio the decides the performance of an engine. Hence supply of air is an important task. During high speed operation of any engine there is not enough time for air to be sucked in the cylinder by itself (by the creation of vacuum during suction stroke).Hence the volumetric efficiency goes on decreasing as engine picks up speed as a result of which only partial combustion takes place. To fulfill the deficiency of air supercharging and consequently turbocharging came into picture.
A TURBO CHARGER is basically an exhaust gas driven air compressor which compresses the ambient air and sent this pre compressed (optionally Intercooled) air into the cylinder during suction stroke. It consists of two basic parts, the exhaust gas driven turbine and its housing, and the air compressor and its housing. The exhaust air from the engine spins the turbine and leaves while the compressor wheel, connected to the common shaft of turbine and compressor, compresses the ambient air and feeds it to the engine.



topicideashow-to-turbocharger-and-supercharger

topicideashow-to-advanced-turbocharger-rotor-for-variable-geometry-turbocharging-systems-full-report
Reply
seminar paper
Active In SP
**

Posts: 6,455
Joined: Feb 2012
#5
16-02-2012, 03:14 PM

to get information about the topic TURBOCHARGER used in diesel engine full report ppt and related topic refer the link bellow

topicideashow-to-advanced-turbocharger-rotor-for-variable-geometry-turbocharging-systems-full-report

topicideashow-to-powershot-turbocharged-propane-injection-system-full-report

topicideashow-to-fabrication-of-turbo-charger-for-two-wheeler

topicideashow-to-turbocharger-design

topicideashow-to-turbocharger
Reply
Guest
Thinking To Register

 
#6
19-03-2013, 04:27 PM

dear sir
i want turbocharger design for project and implimentation reference please do send mallubalichakra@gmail.com
Reply
study tips
Super Moderator
******

Posts: 10,180
Joined: Feb 2013
#7
20-03-2013, 10:15 AM

To get full information or details of turbocharger design please have a look on the pages

topicideashow-to-turbocharger-design?pid=152313

topicideashow-to-design-and-analysis-of-a-turbocharger-system-for-a-diesel-engine-and-its-impact-on-en

topicideashow-to-turbocharger

topicideashow-to-tdi-turbocharged-direct-ignition

topicideashow-to-powershot-turbocharged-propane-injection-system-full-report

topicideashow-to-fabrication-of-turbo-charger-for-two-wheeler

if you again feel trouble on turbocharger design please reply in that page and ask specific fields in turbocharger design
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page

Quick Reply
Message
Type your reply to this message here.


Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  fabrication of turbocharger for two wheeler jaseelati 0 184 02-03-2015, 01:21 PM
Last Post: jaseelati
  seminar topics for mtech machine design jaseelati 0 255 25-02-2015, 01:39 PM
Last Post: jaseelati
  design of a manually operated paper-recycling machine jaseelati 0 230 17-02-2015, 01:44 PM
Last Post: jaseelati
  leaf spring design ppt jaseelati 0 188 13-02-2015, 01:51 PM
Last Post: jaseelati
  axiomatic design ppt jaseelati 0 192 06-02-2015, 03:48 PM
Last Post: jaseelati
  lifting lug design handbook jaseelati 0 198 22-01-2015, 03:29 PM
Last Post: jaseelati
  intze tank design procedure jaseelati 0 191 09-01-2015, 01:18 PM
Last Post: jaseelati
  design of domes nptel jaseelati 0 161 16-12-2014, 02:31 PM
Last Post: jaseelati
  DESIGN AND ANALYSIS OF SOLAR THERMOELECTRIC REFRIGERATION SYSTEM seminar tips 2 1,091 07-03-2014, 03:32 PM
Last Post: seminar project topic
  Design and Fabrication of Compressed Air Engine pdf study tips 1 981 23-02-2014, 12:15 PM
Last Post: ss